The Rubik s Cube is twisted on three sides, and the other three sides are all concave words, and the

The top layer is concave characters and needs to use the left and right hand small fish formula, which is as follows:

1. The formula for the right hand fish is: rur'uru2r'：

2. The formula for the left-handed small fish is: L'u'lu'l'u'2l：

In the Rubik's Cube reduction, the formula often uses urlf instead of the Rubik's Cube reduction step:

U means under, which refers to the top surface of the Rubik's Cube, that is, the top surface of the Rubik's Cube is rotated 90 degrees clockwise.

r means right, which refers to the right side of the Rubik's cube, which means that the right side of the Rubik's cube is turned 90 degrees clockwise.

L means left, which refers to the left side of the Rubik's Cube, which means that the left side of the Rubik's Cube is turned 90 degrees clockwise.

f refers to the front of the Rubik's Cube, that is, the front of the Rubik's Cube is rotated 90 degrees clockwise.

This is the last step of the Rubik's Cube, there are four cases, there are two cases of the three-sided concave word, one is the click in the middle of the concave word goes clockwise. In addition, it is counterclockwise, (the side that is restored on all sides of the building is facing forward) clockwise (upper right, upper right, upper left, upper hook lower back, lower back and lower hook), counterclockwise is reverse one reverse (upper back on the hook, hook up and down, back down and down).

Beg...

For example, white is the bottom and yellow is facing up. If it's all concave, whatever side is on the opposite side, if there are three concaves, the turned side is on the opposite side of yours. And then:

Up, left, up, left, up, left, up, left, up, left, up, left, up, up, up If you don't come out yet, repeat it again, and you will come out.

Put the concave in your right hand, turn the Rubik's Cube over so that the top is facing you, and make the formula: top right 2, bottom right 2, bottom right, top right, top right, bottom right 2, bottom right, top left, bottom right. If you get it right, there should be 3 or 4 concaves in the Rubik's cube at this point, and then put the top side up.

If it is 3 concaves, then the side that was restored in the previous step is facing outward, and the formula is made: upper right, upper right, upper right, upper left, upper right, lower right, 2 can be restored at most two times, if it is 4 concaves, then feel free to do the above formula, there will be 3 concaves, and the next steps are as above.

Fourth-order: face the concave character to yourself, do: upper double lower upper double lower hook upper double lower upper double lower double

Converted to the top-level concave characters, Huai quietly uses the left and right hand small fish formula, as follows:

1. The formula for the right hand fish is: rur'uru2r'：

2. The formula for the left-handed small fish is: L'u'lu'l'u'2l：

Related Jane Yun guesses.

The Rubik's Cube, also known as the Rubik Cube, was first developed in Budapest, Hungary.

School of Architecture El Norn Rubik.

A mechanical educational toy invented by the professor in 1974. The Rubik's Cube has a variety of gameplay methods such as racing, blind twisting, and single twisting, and its popularity has endured, and it is one of the most popular intellectual games with large and small events held every year.

In the usual sense, the Rubik's Cube refers to the third-order Rubik's Cube in the narrow sense.

The third-order Rubik's Cube shape is usually a cube.

Made of resilient hard plastic. The regular racing game is to disrupt the Rubik's Cube and then restore it in the shortest possible time. In a broad sense, the Rubik's Cube refers to all kinds of geometry that can be disrupted and restored by turning.

Rubik's Cube and Huarong Dao.

A single aristocrat of the French lead bend country (independent diamond chess.

It is also known as the three incredible things in the world of intellectual games.

The Rubik's Cube only has 2 concave characters, and these two edges need to be removed. Destroy the mountain.

Reinstall it again.

Don't think it's a joke, because your Rubik's Cube is wrong right now.

Don't talk about the chain imitation was good before, how to spell it, now it is wrong, it is impossible to restore with any formula, the solution is only to remove and reinstall.

If you are satisfied, remember to take it!

Thank you! Shed fiber.

The third-order Rubik's Cube has two concave sides, why?

Glad for your question, the Bump Rubik's Cube is a third-order Rubik's Cube, the Bump Rubik's Cube can be restored with the upper right 2, the bottom right 2, the lower right, the upper right, the upper right, the bottom right 2, the lower right, the upper left, the lower right, the upper right, the lower right 2 to restore, and the restoration can be done in order. If the Bump Rubik's Cube is restored correctly, there will be 3 or 4 concave words, at this time, the top surface will be facing upward, if it is 3 concaves, the side that was restored in the previous step will be facing outward, and then rotate with the formula of the second step, and when there are three concaves, the Rubik's Cube can be restored according to the second formula. The third-order Rubik's Cube is the most basic Rubik's Cube in the Rubik's Cube, and the third-order Rubik's Cube is also a must for novices to learn to shoot the Rubik's Cube at the beginning.

How to restore the four-sided concave characters of the third-order Rubik's cube is introduced as follows:

The third-order Rubik's Cube has 4 concave characters in the ascending style: first restore the bottom cross, the second layer, and use R'u'r'u'r'Urur, restoration of the top cross frur'u'f'After that, complete the top corner block r'u'ru'r'UUR then uses the PLL formula.

Adjust it to a regular form, and then use the formula to restore the three levels.

The first method is to fight layer by layer, first spell the first layer, then spell the second layer, and then restore the top surface, and finally restore the top layer If it is not a Rubik's Cube pattern, it is not the first to restore the lowest and most top.

Restore first by layer, this is the easiest way to restore the three-layer method, first restore the bottom cross, after completing the first layer, restore the second layer, with r'u'r'u'r'Urur moves the top edge on the right to the second layer to complete the second layer, and then restores the top cross FRUR'u'f'After that, complete the top corner block r'u'ru'r'UUR then uses the PLL formula.

Third-order Rubik's Cube. The Rubik's Cube is called the Magic Cube in Taiwan Province of China, the Twisted Dice in Hong Kong SAR of China, and the Rubik abroad's cube. Invented in 1974 by Hungarian architecture professor and sculptor Ernor Rubik, the mechanical educational toy was originally called the Magic Cube and was sold by Ideal Toys in 1980 and changed its name to Rubik's cube。

The Rubik's Cube was the most popular in the 1980s. As of January 2009, more than 350 million Rubik's cubes have been sold worldwide.

The third-order Rubik's Cube single world record is held by China's Du Yusheng in seconds, and the average world record is held by China's Wang Yihui Lao Heng.

Make this formula for yourself by facing the middle of the three concaves: (Directions: The side with r in the diagram is the rightmost concave in your Rubik's cube).

Do it a maximum of two times and you're done.

If it is four concaves, do this formula once on any side of yourself and it will turn into three concaves, and then repeat the previous step.

Summary. Hello, the information on our side is displayed as looking at the concave Rubik's Cube Although the shape is weird, as long as it will restore the third-order Rubik's Cube, you only need to observe it for a few minutes, and you will get the essentials, and you will be able to get it soon. In the process of restoration, the Mirror Cube will take on a kaleidoscopic cool shape, which can also be used as a decoration!

The feel of the Mirror cube is equivalent to that of a rubik'The rivet version of the third-order Rubik's cube,The feel of the screw version is incomparable,Not very suitable for quick screwing,Mirror Rubik's Cube because the shape recognition is not as fast as the ordinary Rubik's Cube,In addition, the shape of each piece is uneven,It is generally difficult to screw quickly,Slowly and naturally grinding and proper lubrication,The feel will slowly get better。

What is the difference between a three-sided concave Rubik's Cube and a third-order Rubik's Cube.

Hello, the information on our side is displayed as looking at the concave Rubik's Cube Although the shape is weird, as long as it will restore the third-order Rubik's Cube, you only need to observe it for a few minutes, and you will get the essentials, and you will be able to get it soon. In the process of restoration, the Mirror Rubik's Cube will present a cool shape that is ever-changing, and it can also be used for fiber and rotten furnishings! The feel of the Mirror cube is equivalent to that of a rubik'The rivet version of the third-order Rubik's cube,The feel of the screw version is incomparable,Not very suitable for quick screwing,Mirror Rubik's Cube because the shape recognition is not as fast as the ordinary Rubik's Cube,In addition, the shape of each piece is uneven,It is generally difficult to screw quickly,Slowly and naturally grinding and proper lubrication,The feel will slowly get better。

I hope it helps, I wish you a happy life, and if you can, please give me a thumbs up, thank you.

Dear, the mantra of the reduction of the triangle Rubik's Cube is: turn the corner blocks to complete, and adjust each side to the same color. Position the edge block and adjust the direction of the edge block.

The first step is to rotate the corner block, which is to rotate the outer corner block to the opposite position of the inner corner block, which is also the easiest step to restore the triangle Rubik's cube. The next step is to adjust each side to the same color, this step is a little more complicated, that is, first turn the triangle cube into two corners of the same color and still in the same plane, and then rotate the triangle of the same plane to adjust the three corners in the same plane. If there are no corners of the same color in the plane where the two corners are adjusted, transfer the two adjusted corners to another plane, and then turn to the three angles of the same color and the same plane.

Then turn the remaining four corners until the whole face is the same color. The third step is to position the edges and edges, in this step you must first find the edges that have been homed, take the overlapping edges as the exchange positions, and exchange them with other edges and corners, and adjust them to all the edges to return to their positions. Finally, if there is a situation where the edge blocks are in opposite directions, you can adjust it.

The grooves on both sides of the fourth-order Rubik's cube depend on the state.

Just talking about the concave empty slot cannot express the state of the Rubik's Cube.

Hope you can send **.

That's what can help you.

Additional questions are welcome. Not in the fight.

Fourth-order flipping state.

Fourth-order fringing state.