Can you set the password of Huawei Honor Router X1 Enhanced Edition by yourself?

1. Yes, you can set it yourself.

2. Enter the settings interface of the main router, then click [Running Status] in the option bar on the left, and you can find the DNS server in the WAN port status bar, there are two in total, the primary DNS and the alternative DNS server, and record them.

3. Click [Network Parameters] - LAN Port Settings] to set the LAN address of the router to save, at this time, it will restart and return to the settings interface and click [Wireless Settings] - Basic Settings].

4. Set the SSID to TP Link A. Set the wireless channel to: 11. Note: The WDS or Bridge feature must be turned off.

5. Click [Wireless Settings] - Wireless Security Settings, and select WPA-PSK as the encryption method, in this example, 12345678 as an example. Note: WPA WPA2 encryption is more secure and more stable to bridge than the old WE encryption, so WPA WPA2 encryption is recommended.

6. Click [DHCP Server] --DHC Server Settings] and set [Address Pool Start Address] to; Set the End Address of the Address Pool to Click Save to restart the main router. The main router is set up.

1. First of all, please make sure that the computer has been connected to any of the X1 medium ports of the Honor Router with a network cable.

2. Then enter :in the computer browser, open the login interface - > enter the correct "login password", you can log in to the setting interface of Honor Router X1.

What should I do if I forget my HONOR Router X1 login password? Some people have a bad memory, and the set password is easy to forget or easy to remember and confuse, so today I will introduce to you the solution of what to do if you forget the Honor Router X1 login password.

Resolution. Log in with your wifi password.

The login password of Honor Router X1 is a password that the system prompts users to set when they first set up the Internet. And in the interface of setting the login password, there is an option that says "Same as Wi-Fi new password". If you select the same option as "New Wi-Fi password" when you set it up, it means that you have the Wi-Fi password as your login password.

So, when you remember the login password of the Honor Router X1, you can try to log in to the ruler with the Wi-Fi password to see if you can log in successfully.

Factory reset.

If logging in with the wifi password is invalid, then it is recommended that you restore the router to factory settings.

Factory reset method: With the power on, press and hold the HI button on the Honor Router X1 for more than 10 seconds, and pay attention to the HI indicator bending. When the Hi indicates that the high indicator light is off, it means that the factory settings have been restored successfully, and then release the Hi button.

It should be noted that all network configuration information needs to be reconfigured to restore the router to factory settings.

Summary. It is recommended that the login password of the router should not be too simple or too complicated, too simple and easy to crack, too complicated and easy to forget, or use a notepad to write down the router password.

Heart of Kings 2 click to play

At the bottom of the router, or elsewhere on the body, there is a label. In this tab, some initial configuration information for this router will be given.

If your router has a default administrator password, you can look it up in the label at the bottom of the router, as shown in the figure below. Then use this default administrator password to log in.

However, the vast majority of wireless routers do not have a default administrator password (login password). In the label at the bottom of the router, there is no default password information, as shown in the following figure.

The administrator password of this router is a password that prompts the user to set himself when he sets it for the first time.

Factory reset method:

1. On the router body, there is a reset button, and there are generally English letters below the button: RESET, RESET, WPS RESET, DEFAULT, etc. Now in your own router, find this reset button.

2. When the router is connected to the power supply, keep holding the reset button for about 10 seconds, and you can restore the router to factory settings.

Different routers, when resetting factory settings, the time requirements for holding down the reset button are also different. Some take 5 seconds, some take 8 seconds, and some take 10 seconds. Therefore, when operating, press and hold the reset button for as long as possible to ensure that the factory reset is successful.

There are 3 network cable interfaces, 1 WAN interface, and 2 LAN interfaces on the Honor Router X1 Enhanced Edition, please follow the steps below to connect.

1. Plug the network cable from the LAN port (network port) of the Optical modem and Broadband modem into the WAN interface of the Honor Router X1 Enhanced Edition.

If you don't use cats for your home's broadband, then you need to plug the broadband network cable into the router's WAN interface.

2. The other 2 LAN interfaces, any one of which can be connected to the computer with a network cable. (No computer, can be ignored).

Please connect the WAN port (blue network port) on the Honor X1 router to the LAN port of the cat with a network cable.

If you have broadband in your home and don't use cats; You need to plug the broadband network cable of your home into the WAN port of the Honor X1 router.

Connect the computer in your home to any of the ports on the Honor X1 router with a network cable.

Open any browser on your computer and enter any ** in the browser to access; At this time, it will automatically jump to the settings interface of the Honor X1 router - > click on the "Try it now" option in the settings page to start the setup.

The Honor X1 router will automatically detect the Internet access mode of your home broadband, and set the Internet access parameters according to the detection results.

If it is detected that the Internet access method is: broadband account Internet access - you need to fill in your home broadband account and broadband password on the page - > after filling in, click "Next".

Set the Wi-Fi name and password.

On the page, set the Wi-Fi name and Wi-Fi password of your Honor X1 router