Can others still rub the network if the router sets a static IP? How to prevent others from rubbing

Summary. Hello dear and happy to answer for you. Hello dear, setting the IP to static is not effective in preventing others from rubbing the network The only problem with setting a static IP address is that it will work on all WiFi, so you can only use this method to solve the problem if the user is only connected to one WiFi.

The sixth trick: turn off wifi hibernation, I hope the answer can help you, I wish you a happy life [than the heart] [than the heart] [than the heart].

Hello dear and happy to answer for you. Hello dear, setting the IP to static is not effective in preventing others from rubbing the network to set a static IP address, the only problem is that it will work on all WiFi, so only when the user is only connected to one WiFi, can you use this grinding method to solve the problem. Sixth trick:

Turn off wifi hibernation, I hope Bi Xi's answer can help you, I wish you a happy life [than the heart] [than the heart of the blind chang] [than the heart].

Hello dear and happy to answer for you. Kiss you can follow these steps: Anti-rubbing net method:

1. Set up wireless network[1] Set wireless encryption. Log in to the management interface of the router, > the wireless security settings, select the encryption method: wpa-psk WPA2-PSK, and set the password to a combination of letters, numbers, and symbols, and the length should be no less than 12 digits.

2] Set up wireless MAC address grinding and digit filtering. If the terminal using the network is basically fixed and no one else will often access the wireless network, it is recommended to enable wireless MAC address filtering and only allow the devices of family members to access. How to set it up:

Log in to the management interface of the router, click Wireless Settings >> Wireless MAC address filtering, add the MAC addresses of wireless terminals in the use environment to the BitS allowlist, and enable the rule: I hope the answer can help you, I wish you a happy life

If my answer is helpful to you, please also give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the motivation for me to enter the town. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood!

Fresh lead flowers] <>

There are two passwords in the router, one is the wireless password and the other is the login password, which describes the settings or changes of each one

1. Set or modify the router login password.

1. Connect the router with the computer, open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. The option to change the login password is generally in the system tools.

3. On the new page, fill in the username and password you want to change. The premise is that you know the correct original username and original user password. Once you're done modifying, save it.

2. Set or modify the wireless connection password.

1. Connect the router with the computer, open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

If you specify an IP, you can assign a certain IP to a certain device, but you can also access the Internet even if you don't have an assigned IP.

You can turn on MAC address (physical address) filtering, as shown in the figure, click "Enable filtering", and then select "Allow" there for the rule. Click "Add New Entry" and fill in the MAC address of the computer or mobile phone you want to connect.

For mobile phones, you need to open the Wi-Fi settings of your phone, and then enter the advanced settings, where you can see the MAC address.

Bringing a given device online should be a Mac filtering feature.

MAC Filtering Procedure to Bring a Specified Device to the Internet:

1.The system is connected to wifi.

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the DHCP client page and view the host name. Record the licensed device hostname and its MAC address.

4.Enter the router security settings interface, click on MAC address filtering, there are several modes to choose from.

Select Allow only mode here, and enter the MAC address of the licensed device to enable the specified device to connect to the Internet.

This can't be done because you connect to the wifi first and then get the IP address.

But you can use the MAC address filtering feature, and only the specified MAC can be connected.

Just do it according to the setup wizard on the router setup interface, no need to set static, dynamic can, and then set a few numbers and letters by yourself and others can't crack it,

Just set a Wi-Fi password.

This is achievable.

You just need a software that can be replaced with a rabbit converter.

Find the right one yourself.

Rubbing the Internet is to connect the router to the wireless signal by cracking the router wireless password. The following measures can be taken:

1. Try to set the wireless password of the router as complex as possible to increase the difficulty of cracking.

2. Change the router administrator login password, do not use the router default administrator login password, and place the router settings that are modified.

3. Go to the router settings interface, in the MAC address filter option, set to only allow the MAC address of your device to pass through. In this way, even if someone steals the wireless password, they will not be able to access the Internet through the router.

Let others rub a little bit, just rub a little, separated by so many walls, the signal is very poor, presumably others are not happy to surf the Internet!

Be generous.

Six tricks for wireless router anti-rubbing network:

1. Lengthen the password of the wireless router.

On the router's settings screen, go to the "Security" option and select the WPA-PSK WPA2-PSK password, so you can set an 8-63 character password. Make sure your passwords are easy to remember but hard to guess.

2. Turn off the router SSID broadcast.

By disabling the SSID broadcast setting, people who rub the Internet will not find out your WiFi name. While wireless network rates will suffer, it's worth it in exchange for increased security.

3. Disable the DHCP function.

If you disable SSID broadcasting, you also need to disable the DHCP function, that is, the wireless router cannot automatically assign IP addresses to wireless clients. In this way, even if the other party can find the wireless network signal, they still can't use the network.

4. Change the default IP address of the router.

Generally, the management address of the wireless router is, if it is modified to or other numbers, it can prevent users from easily seeing.

5. Reduce the transmitting power.

At present, some wireless routers have the function of adjusting the wireless transmission power, and the coverage of the wireless network can be controlled by adjusting the wireless transmission power. This will also prevent you from being rubbed online, as it will be difficult for the other party to find your wireless signal.

6. Bind the MAC address.

Find your Ethernet adapter MAC address, then find the wireless MAC address filter on the router settings page, and add your own MAC address, so that other devices can't use the network without permission.

To ensure that your Internet speed is not affected, and at the same time to prevent others from surfing the Internet, you can take the following measures:

Clause. 1. Modify information. Turn off SSID broadcasting.

Clause. 2. Encrypted network. Change the wireless network password. Right-click your network name (SSID), select Attribute - Security, select "WPA2 - Personal" for security type, select "AES" for encryption type, fill in the key in "Network Security Key", set the password as long as possible, and use a combination of numbers, uppercase and lowercase letters and symbols.

Click OK.

Clause. 3. Address filtering. Go to the router settings page, set it in "Wireless MAC Address Filtering", and set the approved ones to "Allow" and the unapproved ones to "Prohibit". In Static Address Assignment, the allowed MAC addresses are assigned static IP addresses.

In the "Security Settings", add the "Blocked" MAC addresses to the list. Finally, restart the router.

Clause. 4. Go to the router settings, in the DHCP server, and turn off this service.

Clause. 5. Regular upgrades. Go to the official router ** to check the firmware update to prevent the router from being exposed to the network.

Good luck!

The password is complicated, and the secret is changed occasionally.

Complex passwords, encrypted with WPA.

Just bind your max address.