What should I do if the mobile phone can t connect to the wireless WPS and is not available?

Hello, I suggest you try it as follows:

Through the mobile phone settings - > Wi-Fi - > point needs to be connected to the network - > point forgot password. Then click on this network - > enter the correct password and try again (check the "Show password" option when entering the password, you can see the password you entered); If the signal is too weak (below the grid), it will not be able to connect.

Turn off the Wi-Fi switch on the taskbar of your phone, then turn Wi-Fi on again and search for the network connection.

Through the mobile phone settings - > WLAN - > point needs to connect to the ">" on the right side of the network - > whether the static IP is "on", if so, please turn off and then restart the mobile phone connection.

Try opening the static IP address and manually enter the IP address, gateway, network mask, and main domain name server. and other information, connect and test it;

You can go to Settings >> >> Factory Reset - Restore All Settings to try it out.

Based on your description, you can try the following:

Turn off and restart the phone and router, check the wireless router settings, and check whether the DHCP function is enabled.

Reset your wireless router.

Try to change the wireless network environment in another location.

If your phone cannot connect to Wi-Fi.

Please try to cope with the following common situations:

1.If you could connect before, you can't connect now:

2) Check if the Wi-Fi password entered is correct.

2.If you can't connect for the first time or can't connect to a public Wi-Fi:

Check whether other devices under the same wireless network are connected properly and whether connection restrictions are set on the wireless network.

3.If you cannot connect to the wireless network with the Chinese name:

Due to device compatibility issues, some Chinese names or special symbols.

may not be able to connect, it is recommended to change the name of the wireless network to English.

Please check whether the router connection is normal (the cat cannot be connected), turn off the phone and the router and restart it before trying to connect.

5.If none of the above operations work, it is recommended to back up important data (contacts, text messages, **, etc.) and restore to factory settings.

Try. If the problem persists, please bring the purchase receipt, repair card and machine to the Samsung service center for inspection.

Restart the router; modify the channel; Turn off functions such as "Wireless MAC Address Filtering", "Internet Access Control", "Parental Control", "Firewall" and so on the router; There are too many wireless device connections.

2. Modify the channel: The "channel" on the wireless router is automatically selected by the router by default, but the channel automatically selected by the router will sometimes cause the mobile phone to be unable to connect to the wifi. At this time, it is recommended to enter the settings interface of the router and manually set the "channel", as shown in the following figure

3. Turn off the functions of "Wireless MAC Address Filtering", "Internet Access Control", "Parental Control", "Firewall" and so on the router; Some routers can directly disable a device from connecting. Different routers have different functions, please find similar features on your router and turn it off.

4. The number of wireless device connections is too much, and the number of connections of ordinary home wireless routers and wireless clients is generally only about 15; Therefore, if there are too many wireless devices connected to the router wifi, the existing mobile phone will not be connected to the wifi.

Reboot to try, I've had the same issue.

Take a look at the wireless encryption of the route in another encryption way. Probably this is the problem.

It should be a matter of setting up, and it can be done as follows:

1.Find the mobile WPS in the mobile desktop, and click to open the WPS to enter the main page, as shown in the following figure.

2.In the main page, find the My option below, click on it to enter the My page, as shown in the figure below.

3.Find the account option above in My Page and click on it to enter the login page, as shown in the figure below.

4.On the login page, select a login method and enter the relevant account information to complete the login.

5.After logging in, you can find the account information you just logged in to in My Page.

WPS Product Features:

3. Support a variety of document formats, more convenient to manage documents: Kingsoft WPS Office mobile version perfectly supports a variety of document formats, such as doc, docx, wps, xls, xlsx, et, ppt, dps, pptx, txt, ......Viewing and documentation The built-in file manager automatically organizes your office documents and makes document management easier.

Steps: 1. After turning on the WPS of the mobile phone, click on the three horizontal lines in the upper left corner.

2. Click Not logged in to enter the login interface.

I'm running into this issue as well, and then my workaround can provide a reference :

Originally, I used the data, but I can log in to the school network. So I think it's a problem with the Internet.

No network You didn't give the network permission.

It is possible to use wifi

I'm having the same issue. Important documents are stored inside. If you can't get the document back, you're going crazy about the rhythm. The same request for resolution!!

Same issue. I wonder if you solved it later? How was it solved?

In this case, you can first check whether other software can be connected to the network, normal use, if only WPS is not connected to the Internet, it is recommended to reinstall WPS Office (official website, or newer version

Take WPS 2019 as an example.

1. Click on the software and click "Settings" on the home page of the software

2. Click "About WPS Text".

3. In the pop-up interface, click "Check for Updates" at the bottom

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

1. WPS is the meaning of WLAN protection setting, which can be connected to WLAN with one click, and requires the cooperation of mobile phones and routers;

2. WPS unavailability means that the currently connected hotspot does not support WPS function, or the WPS function is not enabled, you can log in to the background settings of the wireless router to view, there are similar WLAN protection settings or WPS menu, and it can be used after opening;

3. WPS is rarely used by people, and it is used by those who do not know how to set up a router wireless network.

It may be that the wireless network is set to be hidden, and you must have a username and password to connect, you can see in the router settings.

Is it a problem with computer network settings, you can use 360 Security Guard to fix it, 360 Security Guard has network tools.

Reinstall WPS and it's normal, it can't be synchronized, and it may be cracked and intercepted.

This mainly considers the two aspects of sending and receiving, and the elimination method to determine the problem.

You can take a look at your network settings.

WPS is to connect without having to enter a complex password, just press the WPS button on your phone and router. But there is a loophole in this that can crack the password, so that people who can't touch the router can easily crack it, and now the router has greatly restricted WPS for security, and even turned off the WPS function at the factory.

Hengyou can enter the router is settings page when WPS is turned on, and Leike's click on Advanced Settings Wireless Configuration WPS Configuration WPS On;

TP-Link's QSS Security Settings enable QSS.