How to solve the problem of slow tire deflating? What causes slow tire deflation?

In addition to obvious penetration, the tire will leak when it is cut. Poor repairs, aging valves, and broken rims can also lead to chronic air leaks.

It is advisable to go to a retail store to check the cause of the real flat tire. Check your tyre pressure regularly once a month.

Protect tires from direct sunlight, ultraviolet rays, rain, ozone, oil pollution, heat, etc. When storing tires, it is important to keep them in a dark and cool place and let the air inside the tires go. Please let it shine in direct rays of the sun.

1.When it rains, please move the tires indoors to avoid water inside;

2.Tires are stuck to oil or water and are susceptible to scarring or deformation. Therefore, please keep it in a place where there is no oil and water;

3.Please do not place in a place where the tire can be bruised or deformed;

4.Please do not place next to generators, batteries, etc.;

5.If you dismantle the tire for a long time, be aware that chemicals may leak from the inside of the tire and the ground will stain the floor.

Tire wear is mainly caused by the friction caused by the sliding between the tire and the ground. The driving conditions of the car such as starting, turning and braking are constantly changing, and the turning speed is too fast, the start is too fast, and the braking is too strong, and the tires wear out quickly.

Today we are talking about slow tire deflation, which is a seemingly unimportant issue that can have terrible consequences.

What type of tires do you have? Four years?

Jogging gas One could be a valve core problem, but this one is easy to check.

Another possibility is the problem of the tire, if it is not a tubeless, it is recommended to change the inner tube.

If it's a vacuum tube, make up for it, and it may be that the steel ring has sandstone.

Hope it helps.

Hello, in the process of daily car use, the necessary travel inspection is very important, for the tire leakage phenomenon, it is not uncommon, the specific reasons for the slow air leakage can be integrated into the following points:

1. The valve part can be checked by soaking in water, this point is generally easier to be, the original car of the valve is equipped with an outer protective cover, if there is no or falling, the sediment is very easy to enter the valve core, accelerating the aging of the internal seal, rust, etc., which can easily lead to air leakage, so first of all, we should pay attention to the usual measures, but also check frequently.

2. The tread is obviously punctured or penetrated, if it is a foreign body, when it is not taken out, the air leakage is slow, and if you find this point, you can stop the leakage by repairing;

3. The repaired part of the original tire is still leaking, first, it has not been repaired; The second is caused by the continued damage of the repaired place for the second or multiple times. This is also easy to overlook and should be examined.

4. Rims. Deformation or irregular damage of the steel rim leads to poor installation and sealing of the tire rim, resulting in the possibility of air leakage, which mostly occurs on the iron steel rim.

5. Due to the use of time, the tire is aging, resulting in some very small trachoma.

It is also more difficult to detect, and it can be detected that the gas is sufficient or appropriately exceeds the normal air pressure, and it is easier to find the leakage point.

6. The tire has been rolled, generally such a situation is not uncommon, many car owners continue to drive a certain distance after the lack of air or foreign body puncture, resulting in tire deformation or internal structure fracture, etc., when installed again, it has been unable to fit tightly with the rim seal, resulting in the possibility of air leakage.

7. There are quality failure reasons for the tire itself, such as some trachoma, tire deformation, etc.

8, some car owners usually like to use the picture to save trouble, if you use too much also has adverse effects, these glue will form a certain "solid" rubber layer on the rim, when disassembled, easy to affect the effective sealing of the contact surface between the hub and the tire lip, when this situation occurs, the original self-replenishing glue residue should be cleaned up and then reinstalled. This is also one of the reasons for slow air leakage, especially since it is still difficult to find.

9. Modification, facelift, upgrade tires and rims do not rule out the possibility of slow air leakage, so it is recommended that the owner usually take the original tires and rims as the selection standard to ensure driving safety.

It is not excluded that there are other possibilities, in addition to the usual daily inspection of the car, especially the parts or systems related to vehicle safety, should focus on inspection, such as tires, when there is air leakage, it should be repaired in time, and the fault will be eliminated to ensure tire pressure.

Do not overload normally to ensure the safety of people and vehicles.

Hope it helps!

Slow deflation of tires may be caused by small cracks in the aging of tires, which are not easy to detect, or it may be that something is punctured on the tire, leaving small holes and causing slow degassing.

There will be many special conditions in the tire itself, which will also cause the tire to flat, or slow to deflate; The current tires are all vacuum tires, and there are no inner tubes, and the problem with the tires themselves, that is, the rubber tires themselves; One is that the tire wall is the thinnest place; The thinnest place is the most fragile, so when driving on the road, if you accidentally encounter a hard object, you may scratch the tire wall; It doesn't matter if it's scratched, some fission will occur over time, or the aging will accelerate, resulting in slow gassing.

It should be that the tire has cracks, and in this case, you must go to the repair shop in time to deal with it, otherwise the problem will become more serious.

It is most likely due to a nail stuck in the tire, or it may be due to an air leak in the door, or it may be because the ground the tire is not particularly smooth, or it may be due to a lack of nitrogen.

It is recommended that the owner go to the repair shop in time to check and determine the cause of the slow tire leakage, and take repair measures or replace the tire in time. The cause of jogging gas in tires may be due to foreign objects inserted in the tires and causing air leaks, or the aging of the valve cores in the valve valves of the tires causing jogging gas.

The wheel hub was deformed by a collision. Due to the increase in the density between the wheel hub and the tire, it is prone to air leakage; There is also the case of run-off that occurs after a tire damage repair. Generally speaking, the current way of repairing tires is mainly through filling.

Therefore, with the change of tire pressure and the wear and tear of the tread, the rubber will be slightly torn in the long run, and the tire will also leak. It is also possible that after a long period of use, very small cracks will appear due to natural aging or sun exposure. These cracks may not be visible to the naked eye, but they do cause air leaks.

In such a situation, the general car owner is unable to self-check, or go to some auto repair shops for a comprehensive inspection.

I believe that many car owners will encounter this situation: the tires were inflated only a few days ago, and they became deflated ...... a few days laterThe problem of this kind of tire running slowly is really worrying. So, what are the possible reasons for the frequent lack of air in tires?

Broken sides and inner edges of the tire.

Damaged side of the tire: Some car owners have a poor sense of position, and often let the side of the tire rub against the curb when parking, which will wear out the side of the tire over time.

Damage to the inner edge of the tire: The damage to the inner edge of the tire is mostly caused by the operation error when disassembling and assembling the tire, which generally occurs in the process of installing the tire after replacing the new tire or repairing the tire.

Broken sides and inner edges of tires can cause tire leaks and a high risk of punctures.

Inspection method F: The damage to the side of the tire can be directly observed, and cracking and bulging will occur in serious cases, as long as there is such a situation, you must replace the new tire as soon as possible to avoid the accident of puncture.

Whether the inner edge of the tire is damaged or not needs to be disassembled before it can be checked, so the owner should carefully supervise when disassembling and assembling the tire in the repair shop.

Foreign objects penetrate the tires.

A foreign body is the most common injury to a tire. Foreign objects that can easily penetrate tires, including nails, screws, wires, glass shards, sharp stones, etc.

Among these foreign objects, nails and screws are the most likely to puncture tires, causing tire leaks.

Inspection method F: If the tire is punctured with a foreign object, we can see it by carefully observing the surface of the tire. If the area where the foreign object has been pierced is more hidden, we can also sprinkle soapy water on the surface of the tire to find the place where the bubbles are coming out.

The hub is cracked. Cracked wheels are rare. A broken wheel will cause the gas inside the tubeless to leak from the crack, and small cracks will also become a hidden danger of wheel breakage. It can be said that although this situation is rare, the level of danger is extremely high.

Inspection method: During the inspection, the wheel needs to be removed, and then observe whether there are cracks on the surface and inner wall of the wheel hub. If there is a crack in the wheel, it should be replaced in time.

First. Valve core jogging is more common, the valve will be aged and cracked and leaking for a long time, this method is relatively simple, only need to replace the valve core assembly to avoid air leakage.

Second. Check whether the wheel hub of the vehicle has external injuries, if the wheel hub is deformed, it will also lead to air leakage due to the poor contact surface between the tire and the wheel hub.

Third. Check the tires for small nails, small screws, glass, pointed objects, etc. When the tire is punctured by nails, sometimes the running gas will not be seen for a short time, and the tire pressure will decrease after a few days, so it is necessary to carefully check the foreign objects on the tread and sidewall of the tire.

It is also necessary to pay attention to the abnormal conditions of the tire, such as bulging, peeling, serious damage, exposed steel wire layer, degumming, and it is not recommended to repair it in serious cases, and it is necessary to replace the tire with a new one.

There are several possibilities for slow tire deflation, and if the wheel is deformed, then the wheel must be repaired or replaced. If the second tire is pricked, then glue the tied one. The three gas nozzles are broken, just replace one with one.

Find the leak point and fix it, if the tire has no leak point, then consider the valve problem.

Plug strip tire repair:

This is the quickest and most convenient way to repair the tire, it is to directly tie the rubber strip into it with iron nails to plug the air leakage, and the tire will be used normally in a short time. However, this method is only suitable for emergency use.

Repair cold tire: Repair cold tire refers to the inner side of the tire leak port thin, and then paste a special rubber strip, and repeatedly squeeze to make the tire return to normal use, using this method to repair the tire, both strong and durable.

Tire hot repair: The preliminary operation steps of hot repair are actually similar to cold repair, the only difference is in the last step, hot repair is the use of heating device, melt the rubber strip, and then fill in the tire holes, it will be repaired,

Valve core problems, it is recommended to replace.

The degree of damage to the side of the tire can be directly observed, and cracking and bulging will occur in severe cases, as long as the hair ruler is round, you must replace the new tire as soon as possible to avoid the accident of puncture. Whether the inner edge of the tire is damaged or not, you need to disassemble the tire before you can check it, so the owner can carefully supervise the operation of the maintenance worker when disassembling and assembling the tire in the repair shop.

Puncture of a foreign object in a tire: You can find it by looking closely at the surface of the tire. If the area where the foreign object has been pierced is more hidden, we can also sprinkle water on the surface of the tire, find places where air bubbles are coming out, and sometimes even hear a hissing deflated sound.

What to do if a car tire is deflated slowly? It's more annoying to slow deflating tires, go fix it, don't have time, don't repair it, you have to pump it every two days. As a car owner, you should pay more attention to the situation of the road surface in the song hall when using the car daily, try to avoid bad roads, do not go to the road, and often observe the health status of tires, which can reduce the probability of slow tire inflation.

Let's take a look at the reasons why car tires are deflated slowly.

1. The side of the tire is damaged.

If the owner does not pay attention when parking, the tire may rub against the road teeth, and the number of rubs will cause damage to the side of the tire and form a dark leak. It will also cause the wheel to bulge and increase the chance of a puncture.

2. The wheel hub is deformed.

Nowadays, in order to prevent air leakage, the wheel hub and tire are tightly fitted. If the wheel hub is deformed, it will affect the compact shape that fits the tire and cause the tire to leak.

3. The valve is aging.

Generally, the original valve of the vehicle is rubber products, and the rubber products have a service life, and the valve may harden and crack after a long time, resulting in tire leakage.

4. Pierced by a foreign object such as a nail.

Punctured tires are the most common injuries, including screws, nails, wires, glass shards, etc. These sharp things can cause tire leakage if the wound is smaller. If it penetrates the tire and inserts it into the damaged area, the owner does not notice it, and it may increase the damaged area of the tire over time.

5. Wheel cracks.

Cracks in the wheel can also cause leakage in the tire, and the crack may also expand, eventually causing the wheel to break. What is the danger of this, the brain makes up, the vehicle is driving at high speed, and suddenly the wheel hub breaks, how tragic the consequences will be.

The reasons for the jogging of car tires are:

1. Valve aging;

2. The tire is punctured by a foreign object;

3. Cracks in the wheel hub;

4. The side of Danfeng tires is damaged;

5. The wheel hub is deformed.

Car tire jogging gas treatment methods are:

1. Replace the valve;

2. Repair or replace tires;

3. Repair or replace the wheel.

The maintenance methods of car tires are:

1. Ensure the correct tire pressure;

2. Check the appearance of tires from time to time;

3. Keep the surface of the tire clean;

4. Regularly check the positioning and balance of tires;

5. Control the driving speed.

The role of car tires:

1. Bear the quality of the whole car;

2. The transfer mold quietly transmits the torque of traction and braking to improve the adhesion performance of the wheel to the ground;

3. Prevent auto parts from being subjected to severe vibration and damage;

4. Adapt to the high-speed performance of the vehicle and reduce the noise when driving.