Dot matrix printer problem!! Urgent!! Urgent!!

The problem is very simple, that is, you change the printer from two prints to one print, and generally the dot matrix printer goes twice, so that the printer's things are very clear, but the speed will be very slow. You can change the printer settings to not print at high speed, which is fast, but not clear. Generally, there is a high-speed button on the printer, and you can press it black.

The first link of the dot matrix printer does not appear is a ribbon problem, and the other links other than the first one do not appear as a print strength problem.

Generally, there is a paper thickness adjustment rod that can be adjusted up and down on the inclined surface of the lid of the dot matrix printer.

If it still does not work when adjusted to the corresponding position, it is a mechanical failure, and it needs to be repaired by a professional.

The strength of the print head can be set through the panel, and the printing speed is set to high density, so that the printing will be clearer and better, but the printing speed will be slower; If your printer has been used for a long time, it may be that the print head pin has been worn out and needs to be replaced.

Uninstall the driver, go to the official ** to reinstall the driver.

If it doesn't work, try it on a different computer, and if it doesn't work, it's a printer problem.

Try this driver.

The ribbon can only be seen in one link, which is not clear.

It has nothing to do with ribbons.

This is generally the case.

You take a look. Is it that your gear is too high?

If the gear is also correct.

You take a look. No, your printhead is not strong enough.

Check that the printer cable is plugged in. Or try a different cable. A machine with an 84 with a 5320 should be doable.

Microsoft system comes with some printer drivers, you just need to choose it.

This problem may be caused by the printer's task list being clogged with the rest of the unfinished tasks, and the steps to solve it are as follows:

First, we open the orange segment printer, click the start button, and select the device and printer option on the right side of the window.

Second, then we find the printer we need to view, and click to select the printer.

Fourth, we need to make sure that the driver of the printer is normal, open the advanced options in the properties of Lingchan and set the driver to the driver in the figure below.

Hello, there are several possibilities for this.

First, the printer's needle mouth is blocked, resulting in the white line that does not appear smoothly in ink, in this case, you clean up the print head to see.

Second, the print head has a broken needle or a needle is shortened due to grinding this accompanying rent. In this case, just change the stylus for the messy wax.

Third, the problem of the drive circuit or the problem of the printer's drive coil can also cause this problem. This situation needs to be dealt with by after-sales service.

There are two ways to solve the problem of printing 4 sheets of A6 paper on A4 paper:

One. Printer support.

Some types of printers natively support multi-page printing. You can set it up as follows:

1.Enter the "Control Panel" of the computer - Printers and Fax", right-click the printer icon, select "Printing Preferences", and the following interface appears:

2.On the Layout tab, in the Type drop-down list, select Print Multiple Pages on One Side

In the Pages per Sheet drop-down list, select the number of pages you want to print on each sheet of paper or 16).

3.If required, select the page order in the Page Order drop-down list. Select Print Page Border to print a border around each page on the paper.

4.Click the Paper tab and select the paper type, size, and type.

5.Click OK to print the document.

The settings supported by the printer will make all printed files print this way, so once you have printed the required files, you will need to change the settings back to the correct settings.

Two. Software support.

When the software prints, it generally has a printing option, in which you can set up multi-page printing.

Taking the word processing software WPS as an example, you can set it up as follows:

1.Select the menu "Print".

2.On the print settings screen that pops up, select "Prints per page" and set the number to 4 pages.

3.Note that the selection in "Parallel Order" should be consistent with the requirements.

4.Click "OK" to start printing.

The settings supported by the software are convenient and will not affect the printing of other software and users. It's just that the interface and option descriptions are not consistent in terms of settings for different software, and it may take some effort to find out exactly where this option is available.

1.No, generally speaking, the machines that print national tax invoices are small machines, and they are all forward paper, such as Epson 730K, etc.

The express delivery list is printed by large machines, such machines have large printing strength, generally can play 7 lines, and it is a backward paper (so that you don't need to put it one by one) such as Epson 690K 3250K

2.According to your usage, it can be used for about a year, the ribbon is cheap, and it is used for a long time.

3.Now it's basically 24 stitches, and 16 stitches are extinct! Needle replacement is a technical job, and the general senior after-sales engineer can change it! The ** for changing a needle is about 30 yuan.

4.This depends on what you type, and the invoice is generally from below to out.

5.Of course, it can print documents, but it is more troublesome to debug, and it is generally not used for other purposes, because it is necessary to debug the distance of the paper, so the machine that specializes in invoicing is only invoiced.

300+ very old machines too! Now we all use 730k 630k, 300k of course it works, but there will be all kinds of problems! 730k 630k are relatively new machines, ** are also moderate, generally around 1500-1750 can be bought.

1: Yes, all kinds of dot matrix printers can be designed to play 1-4 couplets.

2: It depends on what model of dot matrix printer you use and how much you use, like you have 4-5 dots a day, at least 3-5 months.

3: There are 12 stitches, 24 pins, the print quality has not changed much, just the speed and life of printing.

4: It is more convenient to feed the paper at the top and output the paper at the bottom.

5: The document can be printed, but the service life is reduced (the service life of the needle).

1.Can dot matrix printers print invoices (national tax) and courier documents, and can they print several copies?

A: Yes. 2.The ribbon of the dot matrix printer is generally changed frequently, according to the daily printing of 4-5 bills (5 copies).

Answer: It's hard to say the specific time, when you feel that the first page is printed shallow, you can change it.

3.I see that there is an introduction that it is 24 needles, does this number of needles have an impact on the printing quality, and is it easy to replace the needle when it is broken (no after-sales).

A: The chance of a broken needle is very small, but it can be replaced, and it doesn't cost much.

4.It is convenient to feed paper below and output paper below, or it is convenient to feed paper from above and output paper below!

A: It's pretty much the same, but I think the dot matrix printer is still easier to use.

5.Can dot matrix printers only print bills, can't print documents or something?

Answer: Dot matrix printers can not only print bills, but also documents, but the effect is not as good as laser!