-
Method: Shut down: This is definitely the first step to save the phone, no matter how much water ingress the phone, please turn it off first, otherwise it will burn out the circuit directly.
Check the location of water ingress: In most cases, the location of a large amount of water ingress into the mobile phone is generally the headphone jack and charging hole, because as long as it is not broken in other places, there are no cracks.
Check for external damage: if it's simply soaked in water, it's not a big problem. However, if it rains and falls out, check whether there is any cracks in the phone and water in.
Simple water intake: If it is just a simple water intake, then take a hair dryer, adjust to the cool breeze setting, and dry it with a small breeze. Since most of the water enters from the headphone jack, the phone should stand up.
A few days to turn on the phone: simply into the water, when the phone is dried, you can turn on the normal use, of course, if you can't turn on, it can only be too much water, the circuit inside is broken. It should be sent for repair in time.
-
When the phone is transferred into the water, the first thing is to quickly get the phone out of the water, do not light up the screen, do not press the power button, do not try to turn it off, because these operations will cause current changes, which may cause a short circuit on the circuit board.
The first step is to wipe the water on the surface dry, don't move too much, don't shake it, you have to know that in fact, in the small gap in the mobile phone, there is an air block, and if you fall into the water in a simple time, you won't get into the water. If you shake it, it's good, ** it's all water, just send it to the after-sales service. So, the first step, wipe dry, can not shake.
Step 2: Disassemble the machine, remove the back cover and remove the battery, take out the SIM card and TF card, and then wipe the surface water. It is still necessary to pay attention to the fact that you can't throw it off, and you can't use a hair dryer, the same reason, there is no water in the place. Try wrapping your phone in a cloth or tissue for a few minutes to create a little "vacuum effect" and suck out too much moisture.
If possible, put the phone in a place with warm air circulation for a few hours.
The third step is to take out the dried rice at home, put the battery, mobile phone and other key parts into the rice, and use the powerful water absorption function of the rice to save your mobile phone.
-
The treatment method of the OPPO mobile phone falling into the water is as follows:
1) Under normal circumstances, OPPO mobile phones generally can't remove the battery, so after falling into the water, after fishing up, don't light up the screen, don't press the power button, don't try to shut down, these operations will cause current changes, which may cause a short circuit or breakdown of the circuit board.
2) Then wipe the water on the surface of the mobile phone, don't move too much, don't shake it, in fact, there is a small gap in the mobile phone. And there is air in the void, and if you simply fall into the water, you won't get into the water.
3) Finally, open the back cover of the phone, take out the SIM card and TF card, try to wrap the phone in a cloth or tissue for a few minutes, and then put the phone in a heater or under the sun for a few hours. If it can still be used normally, it is a false alarm. (There's also a practical way:.)
It is to bury the phone directly into the dried rice and let the rice absorb the water in the phone. Generally put it for 24 hours).
-
Answer: I'm sorry to hear this news, after the mobile phone enters the water and liquid, in order to avoid further damage, it is recommended that you: 1. Quickly take the mobile phone out of the water, for the removable battery, quickly unplug the battery, and remove the SIM card and memory card; If the battery is not detachable, take out the SIM card and try not to operate the mobile phone again; 2. Use a paper towel to blot the visible water stains, wave the mobile phone with appropriate force to keep the liquid inside and outside the mobile phone away from the mobile phone as much as possible, quickly place the mobile phone in a cool and ventilated place until the moisture of the mobile phone disappears, or use the cold air of a hair dryer to dry the fuselage; 3. After simple processing, be sure to send it to the customer service center as soon as possible, and hand it over to professional and technical personnel to help you test and repair.
-
Water ingress of the mobile phone After liquid ingression, in order to avoid further damage, it is recommended to dispose of it according to the following methods:
1. Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone has been turned off, please do not try to turn it on;
2. Take out the SIM card and memory card of the mobile phone in time, if the mobile phone is a removable battery, please remove the battery;
3. Use paper towels and cotton swabs to dry water stains on the surface of the mobile phone;
4. If you do not clean up after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and maintenance as soon as possible.
Precautions: 1. Please do not turn on or charge after water ingress, at this time, powering may cause short circuit damage to mobile phone components;
2. Please do not try to shake off the water by throwing the mobile phone, this operation may cause the liquid to seep into other components;
3. Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone.
This is available for all OPPO models.
-
If your OPPO phone accidentally gets water, you can immediately bring your phone to the OPPO official customer service center for processing.
2.Do not use the hot air of a hair dryer to blow or expose it to the sun, bake, etc. to handle the phone, as high temperature and high heat may cause permanent damage to the components of the phone.
3.Do not attempt to shake off the moisture by shaking the phone, as this may cause liquid to seep into other components.
This is available for all OPPO models.
Tool Raw material: OPPO A59S mobile phone.
1. First, find Settings on your phone's desktop and tap on it. >>>More
There are two phenomena of vibration on startup, and it cannot be turned on after vibrating all the time after booting, it is recommended to press and hold the power button for 10 seconds, and then try to restart the machine. If you still can't turn on the phone, it is recommended that you bring the purchase invoice and warranty card and send it to the OPPO customer service center for testing and processing. >>>More
Hello, OPPO A59S is 5V2A Normal Charging Low temperature will affect battery activity, resulting in slow charging. If the ambient temperature is normal (0 to 45) and the charging is slow, it is recommended that you try the following operation methods: 1. Use the original charger to charge, and check whether it takes a long time to fully charge when the machine is turned off and charged; 2. If it only appears when charging is turned on, it is recommended to close all background programs before charging (drop-down menu, click one-click to clean); 3. Replace the power socket and try to charge; 4. After backing up important data (contacts, multiple files, etc.), and then restore factory settings (Settings - System "More" - Factory Reset, please do not check "Clear completely"). >>>More
If your phone does not have a 4G signal, it is recommended that you try it as follows: >>>More
After the mobile phone is injected, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it as follows: >>>More