What should I do if the indicator light stays on after the phone is flooded?

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

If your mobile phone is flooded with water or liquid, it is recommended that you do not try to turn it on to prevent damage to the internal components due to a short circuit inside the machine (if the machine battery is removable, it is recommended to remove the battery). It is recommended that you bring the machine to the local after-sales service center, and the engineer will help you test, and the specific cost is subject to the test results of the service center.

The screen of the mobile phone is not lit when it enters the water, it may be that the screen is burned out, and the mobile phone should be turned off immediately after the water is in, and the motherboard is easy to burn out in the power-on state to increase the maintenance cost.

Some experts remind that hair dryers are easy to blow water into the inner part of the phone, and are the "last thing you should do" to "rescue" the phone from water in.

If the phone falls into the water during charging, then the indoor power should be cut off before taking the phone to prevent electric shock accidents. Next, the owner should remove the battery, memory card and SIM card, place the phone on a dry towel or clothing, absorb the moisture on the surface of the phone, and then put the phone in a bag of rice for a day or two. Because rice can effectively absorb water, if you are lucky, your phone may be able to "wake up" when it gets water.

Precautions for water ingress in mobile phones:

1. Do not move or shake the phone frequently after entering the water, so as to avoid the spread of moisture inside the phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

The above content reference: People's Daily Online-Don't use a hair dryer when the mobile phone is flooded! An immediate shutdown is the best policy.

It may be that the circuit motherboard is flooded, some short circuits, if it has been disassembled or blown by hot air after water ingress, it may also be a cable failure, which needs to be repaired

1. First of all, it is best to remove the SIM card to avoid losing contact information.

2. Wipe each part of the phone with a cloth or paper towel, and do not move or shake the phone too much, so as not to let water swim everywhere inside the phone.

3. Try wrapping your phone in a cloth or paper towel for a few minutes to absorb excess moisture. Turn on the cool air setting of the hair dryer and blow at the hole of the mobile phone about 30cm away from the mobile phone for at least one hour.

4. Finally, wrap the phone in a thin tissue and put it in a jar or bag full of rice for at least 24 hours, during which time it cannot be turned on. Rice absorbs water very well and can save a damp phone.

5. The above is only a salvage measure, if there is still a fault after starting, please go to the after-sales service.

Answer: After the phone gets into water, it is recommended that you turn off the phone as soon as possible to prevent a short circuit in the internal hardware circuit board, burning the motherboard, and even if the battery protection circuit is short-circuited, the battery may spontaneously ignite or burst. The indicator light and the hit ** are two modules, for example, the indicator light is a simple IO control circuit, and the hit ** is a separate baseband module that has nothing to do with the screen, and they can work without being affected. The screen does not light up because of the problem with the cable at the connection between the screen and the motherboard, such as rust after water ingress, and the poor connection does not rule out problems with the screen module.

Generally, the machine should be turned off as soon as possible after water ingress and dried with a hair dryer, and the time should not be too long. In this case, it is recommended that you go to a repair shop for repairs. And turn off the water vapor in the phone.

I hope it can help you if it's convenient for you, please help me like it.,Thank you.。

1.The mobile phone must be turned off after water ingress to avoid the expansion of the fault and clean up the water accumulation as soon as possible.

2.If you can't do it yourself, it's best to go to a repair shop to check it out.

It should be a short circuit in the water inlet circuit of the mobile phone.

1. After the mobile phone enters the water, remove the mobile phone battery directly as soon as possible.

2. Then wipe the water off your phone.

3. Use a hair dryer to swing the dryer over a long distance.

4. Put it in a cool and dry place for 24 hours, if there is no hair dryer to dry the water, it is best to put it for 48 hours.

Install the battery and try, if it can't be turned on, then you have to take it for repair.

Summary. Hello, the kitten is inquiring for you, please wait a moment.

The phone is flooded, and the indicator light keeps turning red, what to do.

Hello, the kitten is inquiring for you, please wait a moment.

The red light keeps jumping when the phone is flooded and charged. It turns out that it does not jump when it does not enter the water and flushes the electricity.

Are you there. Hello, in.

Please stop charging immediately, dear.

The most taboo thing to do after the mobile phone gets into the water is to charge it immediately, which is likely to burn out the motherboard.

1.First of all, you should put your phone in a rice bowl or use a hair dryer to dry it.

2.Then immediately get the accessory mobile phone repair shop to repair it.

It's been flooding for days.

Then you should get it to the mobile phone shop to be repaired as soon as possible.

Punch keeps jumping red lights.

The battery of the mobile phone is broken if it is better when it gets into the water, and if the motherboard is broken in a serious way, it will be scrapped directly.

The repair shop does not give repairs.

Why, dear.

Say you can't fix it.,Dear.,If you can't fix it, it's likely that the motherboard and battery have been broken.。