If you want to learn welding technology, where can you learn it?

1: Learn what you need for work; Before learning electric welding technology, I should have an idea, what company I want to enter, I need to learn electric welding or carbon dioxide gas shielded welding or argon arc welding, which positions to learn, whether it is flat welding, flat fillet welding or horizontal welding, vertical welding, vertical welding, and vertical welding. If you learn it, you can apply it in your work, and you should be targeted.

2: Practical training: welders should learn well, mainly six words "diligent study, more thinking, hard practice", with hard training as the most important, through hard training to master the skills taught by the coach, standardize the basic movements.

3: Practice should be concentrated continuously: three days of fishing and two days of drying nets is not good to learn welders, only let go of the mentality of eagerness, step by step, in order to really learn the skills, really use a lifetime.

4: To learn from a high-level teacher: what is a high level, you can go to a school with better equipment, teachers and other conditions, this kind of school is relatively strong.

5: Before welding, we should carefully study the theoretical knowledge of welding, think while welding, and constantly summarize experience, so that the technology will progress.

In our country, welding operations need to be licensed, welders are the type of work that belongs to the access category, in the professional qualifications of skilled personnel, only five of the 81 types of work in the access category, welders are one of them, and the actual situation is that most of the industry practitioners are unlicensed operations. With the continuous standardization of technology and the relevant requirements of the industry, more and more people want to take a welding certificate, the advantage of the certificate is still very large, first of all, the salary of the certificate and the non-certificate are very different, often able to reach more than double or higher level. Therefore, the issue of short-term welder training has naturally become a concern for practitioners.

Welding as an industrial "tailor" is a very important means of processing in industrial production, the quality of welding plays a decisive role in the quality of the product, so, what is the future development of welding technology?

Industry outlook. With the development of production, welding is widely used in aerospace, aviation, nuclear industry, shipbuilding, construction and machinery manufacturing and other industrial sectors, in China's economic development, welding technology is an indispensable means of processing. After entering the 21st century, welding is an important part of the manufacturing industry, and the rapid development, so it has brought unprecedented development opportunities to the welding industry.

At present, China consumes 300 million tons of steel every year (about tons of welded structure), and needs about 750,000 welding machines, and the welding industry will continue to grow in the next 8 10 years.

Now there are many advantages in signing up for our school's welding training class, and only 18 people are recruited for the orientation class of the famous welding enterprises of Zhongshi Logistics Group, short-term training, and directional commission training. Small class teaching, if you want to study, you need to arrange classes in advance, go to the school for comparative inspection, and be satisfied with the scheduling of classes according to the students' time; Sign up for free railway clothing and enjoy three exemptions and two supplements. If you are interested, you will study on campus during the National Day, and the number of places is limited, and you will not be recruited if it is full.

The welding industry is still promising, but it takes a lot of effort in the early stage, the effect and quality of the products welded by different welders are quite different, and practitioners need solid welding technology.

Due to environmental factors, some companies have reduced their recruitment, and some have even not recruited people, but the welder industry is still outstanding in the general situation of increasingly difficult employment. The gap in the industry is large, the development prospects are good, the salary is considerable, the average monthly salary is 6000-10000, and many enterprises have good benefits, high salaries and stable incomes, which has become the best choice for many people to learn technology.

To learn welding technology, you must find a reliable training school, it is best to find the kind of chain school that has a long school time and has school points all over the country, where you can learn reliably, try not to go to a small training institution!

Pay attention to safety and prevent electric shock. Carry a tester with you to test whether the shell of the welding machine is live. Wear insulated shoes and gloves when working.

When welding, the site should be inspected, and the flammable and explosive things should be taken away, and those that cannot be taken away should be blocked. When encountering a closed container to be welded, it is necessary to detect whether there is a flammable and explosive liquid or gas remaining in the closed container, and if so, it should not be welded before cleaning. If there is no condition for cleaning, the container can be filled with water for welding.

When working at height, it is necessary to hang safety belts to prevent welding slag from falling and injuring people. When working in a humid and narrow environment, there must be a safety officer on the side to take care of it, and the power must be cut off to save people in case of accidents.

Hello, learning welding techniques mainly depends on personal efforts. When studying, it is easy to learn with your heart and work hard, and get more hands-on operations. Choose a professional school system to study, and any skill learning is based on your own hard work to get the harvest.

Hello 1

Familiar with the relevant welding engineering terminology and understand the basic knowledge of common welding materials;

2.Through training, the basic process knowledge of welding is initially obtained;

3.Master the basic concepts of welding production process, understand the practical knowledge of welding technology, and lay the foundation for future courses;

4.Understand the safety technical knowledge of welding and achieve safety training;

5.By welding simple workpieces, students will develop welding process analysis and hands-on skills, and lay a solid foundation for future production technology.

Welding, as a special type of work, is a very professional technology, mental and physical strength at the same time, therefore, if you want to engage in the welder industry, you must go through formal training and study, and verify the relevant professional skills certificate before you can work. So, if you want to learn welding technology, it's better to learn?

If you want to learn welder technology, you must go through professional training, be guided by professional teachers, and constantly summarize experience through actual combat, therefore, you must choose a professional vocational skills school for training and learning, and go to verify the relevant certificates.

Therefore, the school offers a welder major, 0 basic learning for 2 months. Welding includes electrode arc welding, two welding welding, argon arc welding, argon electric welding, high-pressure vessel welding, aluminum welding and other professional welding technology courses, the school to build a professional welding training room, 70% training + 30% theory, teachers teach hand-in-hand, to create professional skills Huai Zi Huai can be elite, 0 foundation can also be learned, in school can be obtained certificates, professional training room operation, graduation certificate employment, consumables during the study period are free, so that students can master solid skills in a short period of time, the achievement of high-paying employment road.

If you choose an informal training institution, then the corresponding equipment and facilities are not professional, and the operation process does not meet the requirements of industry standards. If you can't learn the real technology, it is undoubtedly a waste of time and energy, so you must be careful in your choice.

If you are so good at working in the welding industry, will it be difficult to learn or have high entry requirements? In fact, it is not, first of all, as long as the welder masters a certain welding technology, he can find a job, there is no educational requirement to bring the front, the company in the recruitment, but also only pay attention to the welder's technology, holding a certificate, for the academic requirements are not so high, so welding is a type of work that is hungry for a few, purely relying on technology and physical strength.

To learn welding technology, you have to go to a professional vocational skills school to participate in training and certification, the introduction of welding technology is relatively simple, the basic welding technology can basically be started in one or two days, the short-term professional learning cycle is about 15 days, and you can choose employment after mastering the basic technology. You can also directly choose to continue your studies, and the welding technology is also very diverse, such as argon arc welding, arc welding, gas welding, resistance butt welding, etc., and the long-term professional learning cycle is about a month.

Many people want to find a master to teach themselves alone, follow a master as an apprentice, and then slowly become better and better at welding, and later reach the master's hand-rented sail art. Bad years.

Another way is to find a welder training school, in the welder training school can systematically learn all the welding technology, to help everyone understand the theoretical principles of welding, so that students can think more independently about welding methods, to help students from scratch a training process, if you learn well in the welder school, you can directly reach the welder master after learning.

Hello! People who want to learn welders should know that if you want to learn welders from scratch, you need to learn a lot of practical hail practice from the beginning, so you must find a welder school that pays attention to practical teaching, learning welders is mainly to learn welding technology, generally there are ordinary hand welding, a little more difficult carbon dioxide protection welding, a little more difficult argon arc welding, argon welding, and flaw detection, etc., each welding rubber method is a lot of continuous practice.

Welders go to professional schools to learn, with or without technology can be learned, from the basic training, generally set up point welding, electric welding, plate and board docking, pipe and tube butt welding training projects, in the welding method to focus on training flat welding, vertical welding, hanging welding, vertical welding and other welding alignment.

Most people will have questions about how much welder training is, how much does it cost, how much does it cost, whether it is expensive, etc., before choosing a training provider. Nowadays, due to the fierce competition in the industry, the training institutions on the market are scrambling to use various low-price, first-class and other marketing methods to recruit students, so there is no standard for the cost of domestic welder training tuition.

Generally speaking, learning electric welding should be based on the time of learning and the type of welding technology, such as general welding, argon arc welding training is relatively low, two welding, cellulose welding, etc.

People who want to learn welders should know that if you want to learn welders from scratch, you need to carry out a lot of practical exercises from the beginning, so you must find a school that pays attention to practical teaching, learning welders is mainly to learn welding technology, generally there are ordinary hand welding, carbon dioxide protection welding, argon arc welding, argon welding, and flaw detection, etc., each welding technique requires a lot of continuous practice, in order to really learn welders.

There are many welder training schools in Chengdu, there are two schools that do better in practical training, one is on the building materials road in Chenghua District, Chengdu, and the other is on Checheng Avenue, Longquanyi District, Chengdu, the two welder training schools have their own characteristics, the teaching level is very good, and the job can be assigned after graduation, you can go to the scene to see and make a comparison, and these two places are the welder certificate application points in Chengdu, and the training here can also take the welder certificate test casually, which is very convenient.

Personally, I think the better thing about these two schools is that students don't have to worry about what to do when they come to school, they all learn in school, and they will not continue to study for free in the next term, which is very good and very secure for newcomers. And the purpose of the school is to let the students really learn the technology, for the society to deliver technical talents, the fees of these two schools are relatively cheap, but the consumables required for practical training are provided without restrictions, you want to practice as many times as you want, until you really master every welding technology.

If you want to learn welding, you can generally go to the local provincial government, and you can go to the training institutions or technical schools in the provincial government, and you can arrange the examination, of course, there will be training institutions in larger cities, you can consult the local labor bureau or intermediary agencies, they are also responsible for arranging and organizing learning.

Everyone's judging criteria for good or bad are different, you must go to the best welder training institutions when you must visit the site, it is recommended to visit from the following points:

1. Teachers measure how well a training institution is, first of all, to see whether its teachers are strong, what qualifications the teachers he hires, and how many years of experience.

2. Industry experience depends on the experience of the training institution, whether it has just done this training for a short time, or has accumulated a certain amount of training experience, and whether it is mature in the construction of the project.

3. Whether the curriculum of the institution is scientific, whether the teaching content is in line with the market, 4. There is not much practical training, and the learning technology, especially the welder technology, must be operated and practiced more in order to master it solidly.

Hello, you can consider the following aspects:

First, it must be a regularized school, and the well-known school has strong running strength, and it is more secure if it has strength.

Second, the teaching equipment auto repair industry is a very professional industry, the technological innovation of the auto repair industry is also very fast, so whether the equipment is professional, whether the equipment is advanced and so on are within the scope of our inspection.

Third, the training course to learn auto repair focuses on practical training, test the ability to do a good job, the basic knowledge of learning at the same time, the practical operation is very important, the training course determines the teaching quality of the auto repair school. The proportion of practical training courses is higher than that of theoretical courses, and only by combining theoretical training can the learning effect be maximized.

Fourth, to see the management of an auto repair school is good or bad, in addition to seeing whether it can teach technology, but also to consider whether it can improve personal quality, only without good personal quality and superb technology, in the social work will have long-term development.

5. In terms of employment security, what is the guarantee for the employment of employed students, whether there is long-term and reliable cooperation with well-known cooperative enterprises, and whether the entrepreneurial assistance is perfect for entrepreneurial students, all need to be carefully considered!