How to format and reinstall the system win

The normal channel from win7 to win10 will not format the c disk,so that the installed win10 system will not be clean,there are still files that retain the original system in the c disk。 So how to format the C drive and then reinstall the system?

Format the C drive.

ISO mirroring; (**Address: win10 system ISO image) 2. Make a U disk to start; (Reference: Use U disk to make Win10 system disk tutorial) 3. Start PE format C disk;

4. Install win10 in PE.

The above is how to format the C disk to reinstall the system,Using the traditional method of reinstalling the system,You can automatically format the C disk,This is also the installation of win10 is the purest win10 system。

Put the information that you think is important in the C drive.

File backup. Move to.

Other disks or USB drives will do.

Put XP or. Other system disks.

Put in the optical drive. Restart your computer. Press. del

Key. Enter. BIOS settings.

Village. Select the second option.

advanced

biosfeatures

Enter. And then.

firstboot

press device enter. Choose.

cdrom enter. Press. f10

Y starts installing at this point.

Follow the prompts. to ask you.

In which disk.

Highlight bars. on the C drive.

Above. Instant C drive.

Then press enter. I formatted the C drive.

And reinstalled the system.

And then. Just press the hints.

Don't understand. Ask again.

1. First of all, click on the start menu on the computer to enter the settings options.

2. Then in the settings options, select System Update & Security, if it is win, other systems can be selected in the control panel.

3. Then under the Update & Security page, select the Recovery option.

4. Then select Reset this PC in Recovery, and click on the -Start option on the right.

5. There will be two options here, choose not to keep, that is, the second option, so that the computer will be restored to the same as before after resetting. Nothing.

You go and buy a one-click version of the disc and boot the computer with a CD-ROM drive, which has a one-click to divide a disc into 4 partitions. That's fine.

1. Start from the U disk to enter this menu, select the option enter through the arrow keys, start the Zaokai PE system, and if you can't enter, select the old version of the PE system to close the socks.

2. Enter the PE system, then double-click to open the [DG Partition Tool], right-click the hard disk, and select [Quick Partition].

3. Re-set the number of partitions and the size of the partitions, generally C disk is recommended to be more than 35G, if it is a solid state drive, check the alignment stool state to call the area" to 4K alignment, click OK, and perform the hard disk formatting and repartitioning process.

4. After completing the partition, open [Chinese cabbage one-click installation], select the ISO image of the notebook system in the image path, and the GHO file will be automatically extracted at this time, click the drop-down box to select the GHO file.

5. Then click Restore Partition", select the system installation location, generally C disk, if it is not displayed C disk, you can choose according to the volume label", disk size, and click OK.

6. This prompt box pops up, check the "and boot repair" after the checkbox is completed, and click Yes to start the system reinstallation process.

7. Go to this window and perform the operation of installing the system to the C drive, which takes about 5 minutes.

8. After the operation is completed, the computer will automatically restart, at this time, pull out the USB flash drive, restart to enter this interface, and continue to install system components, drivers and configuration processes. The reinstall process will reboot multiple times, and the laptop formatting and reinstalling the system will end after booting into a new system desktop.