The difference between reinstalling the system and formatting, and the difference between redoing th

Formatting is just one step that needs to be done before installing the system.

Formatting is all about deleting the partition of your computer and deleting all the data on it. Of course, this formatting is also optional. You can format any partition.

Before installing the system, you need to back up the important data on your computer, because once you choose to format the partition, the data inside will no longer be kept.

Then, set the coms, set them to disc boot.

Press F10 to save and exit, put the installation disk into the optical drive and start the computer.

At this time, the optical drive will be automatically detected and the installer will be booted (the installation disc has manual command installation and automatic installation), after copying the installer, you will be prompted whether to partition the hard disk, including deleting the partition, step by step, after copying the installation file, the computer will reboot again, then you can change the startup item back to the hard disk boot.

The system installation is complete, and finally the driver is installed.

You can make a ghost backup, and restore it directly next time there is a problem with the system. It's very convenient.

If your computer is a locker, formatting means that you take out all the contents of the cabinet, and the cabinet is empty. The reinstallation system is when you replace all the old things in the cabinet and put in new things.

If you want to reinstall the system, you need to format it first, or you can also install two systems on one computer; If you format it but don't reinstall it, your computer will be a space-taking stupid person who can't do anything, and it's completely useless.

You'd better reload.

What's wrong with formatting.

It's the same with the C drive.

After the grid, you also have to install the system.

Formatting means to clear all the data of that disk.

Your computer card may be a problem with your system.

It depends on which disk your system is on.

Generally in the C drive.

Of course. You'll have to reinstall the system.

Because you can't get a C drive.

If you first bought a computer, you backed up your computer's operating system. Then you can restore it with one click! But I guess there isn't, right?

Then you can only reinstall the system, there are many ways to install the system, if you don't know, you can now have some relevant information on the Internet, take a look! The reinstallation system has nothing to do with the format D drive! It's just that every time you install the software, the system will put the system files of the software in the D drive by default, so sometimes after deleting some program files by mistake in the D drive, the program is not normal or cannot be opened when running!

Take a look at the relevant information on the Internet, you really don't need to repair the computer and reinstall it!

1. After putting the system boot disc in, press the del key to enter the BIOS, and select the boot item as CD-ROM to boot.

2. After starting the disc, follow the prompts.

3. Format the partition (then the partition where the system was installed before).

4. Then follow the prompts.

The best way for novices to reinstall the system is to use the CD-ROM load!!

1.Insert the disc and the system will run automatically, then select.

Install the system. Or restart your computer and allow the disc boot system to boot.

2.Enter the installation interface, step by step there will be a prompt, you have to choose a fresh install, put the original.

C disk. Formatted, new.

System installation. to the C drive.

3.After a period of waiting, click Next, Next, and after several restarts, it can be installed.

If you think the disc is troublesome, you can also look for the relevant information of the "hard disk direct installation system" on the Internet, and directly put the ** system in other disks except the C disk, and you can also install it directly.

It's normal for you to have a D drive, a desktop and icons, if you want to clean it all, just reinstall the system, there's no garbage.

The difference between computer redo system and formatting is that the operation is different, the data retrieval is different, and the content of the hard disk is different.

First, the operation is different.

1. Redo the system: The redo system is to replace the original system of the computer, and replace the old system files with the new system.

2. Formatting: Formatting erases any file data from the computer's hard disk.

Second, data retrieval is different.

1. Redo the system: The redo system cannot be retrieved by the recovery software.

2. Formatting: Formatting can be used to retrieve data through some recovery software.

Third, the content of the hard disk is different.

1. Redo the system: After redoing the system, there are new system files in the computer hard disk.

2. Formatting: After formatting, the computer hard disk is an empty hard disk, and there are no system files or any other files.

Presentation Tool: Computer Model: ASUS Adolbook 14 2020

System version: Windows 10

If the format is the system disk C drive, the computer needs to reinstall the system; If you do not format the system disks D, F, and E, you do not need to reinstall the system. To format the hard disk, first open the computer, then right-click the drive letter you want to format, click Format, then click Start, the system prompts that formatting will delete all the data on the disk, and finally click OK.

Steps to reinstall the system on your computer:

1. Start the computer, press del to enter bios setup appears on the screen, press and hold del.

2. The BIOS Settings window appears: click Advance BIOS Features and click Enter.

3. The BIOS Settings window appears: click Advance BIOS Features and click Enter.

4. Go back to the main menu and save the BIOS settings.

5. The saving method is: press F10 and click Y.

6. Put the disc into the optical drive and restart the computer. Follow the installation prompts to install step by step.

7. After installation, be sure to remove the disc from the optical drive before rebooting for the first time.

Notes:

1. Redo the system regularly. 【Maintain a good system environment】You can use one-click ghost2011 to back it up.

2. It is best to erase the hard disk partition of the system.

3. If you erase the partition and rebuild, you must use the disk doctor to check whether there is anything bad about the disk boot.

The differences are as follows: 1. Formatting: It refers to an operation to initialize a disk or partition in a disk, which usually results in the removal of all files in the existing disk or partition.

2. System reinstallation: refers to the reinstallation of the computer's operating system. Includes fresh installation, upgrade installation.

Conclusion:If you choose to do a clean installFormatting and system reinstallation will also delete the files in the computer system disk;

If you choose to upgrade the installation method, then the system reinstallation will keep the sliding files before Zhengmin Lap and will not be deleted, while formatting will delete all files in the system disk.

There is a difference between the two.

Formatting means erasing any file data in the computer hard disk, you can choose a single partition drive letter to erase or choose to erase the entire disk, after erasing, the computer hard disk is an empty hard disk, no system files or any other files exist. Of course, the computer will not boot normally;

Reinstalling the system is to replace the original system of the computer, replace the old system files with the new system, and when reinstalling, the partition where the original system is located in the computer will be formatted, and then the system files of the new system will be rewritten into it. After the new system is reinstalled, the computer can boot normally and enter the new system operation interface;

Formatting is the elimination of hard disk data is a data erasure action, formatted hard disk if not written to anything else, data can be retrieved through some recovery software, and the partition after reinstalling the system because new system files are written after formatting, therefore, data can not be retrieved by recovery software.

The lattice disk can be used on the entire physical hard disk, and the system will only affect the logical disk where the system is located!

Format all disks except the C drive, and then redo the system for the C drive!