How to check your phone s own memory on your computer

Click Storage in the phone settings, and you can see how much memory there is in the phone and how much memory has been used in the storage.

In a broad sense, mobile phone system memory is divided into "mobile phone running memory" and "mobile phone non-operating memory". The "running memory" of a mobile phone is equivalent to the memory (or memory module) of a computer; The "non-running memory" of the mobile phone, that is, the ROM and hard disk of the mobile phone, is the internal memory of the fuselage (referred to as the fuselage memory), which is equivalent to the hard disk of the computer.

Mobile phone system memory refers to the memory used by the mobile phone when running programs (i.e., running memory), which can only store data temporarily and is used to exchange cache data with the CPU, but random access memory (RAM) itself cannot be used to store data for a long time.

Another generalized mobile phone system memory is the built-in memory used to store things (often referred to as "memory"), that is, the body memory, the Android phone system occupies a part, and other installers will also occupy a part. Just like the 8G MP4, it has 8G of storage.

To use a computer metaphor, the memory of the mobile phone system is the memory (memory module) of the computer; Another generalized mobile phone system memory is the computer's hard disk (a single-partition hard disk with only a C drive).

If you have a larger system memory, the phone can open more programs or programs that occupy more resources, and when the mobile phone system memory is sufficient, it cannot improve the speed of running programs, but it can only be said that a larger running memory can better ensure the normal operation of the phone.

Find the settings on the desktop of the phone and click on it, then click on General, and then click on About This Mac, and you can view the memory of our phone in this interface.

Mobile phone system memory, that is, mobile phone running memory (RAM), is used to temporarily store computing data in the CPU and exchange data with external memory such as hard disks. The "running memory" of the mobile phone is equivalent to the memory (or memory module) of the computer, and the larger the "running memory" of the mobile phone, the more smoothly the mobile phone can run multiple programs.

Mobile phone system memory is a type of random access memory (RAM) that is accessed at high speeds, with equal read and write times, and is independent of address.

Storage that the contents of a storage cell can be removed or deposited as needed, and the speed of access is independent of the location of the storage cell. This type of memory loses its contents when the power is off, so it is mainly used to store programs that are used for a short period of time.

1.On your phone's desktop, tap "Settings".

2.On the settings page, click "General".

3.Click on "Storage & iCloud Usage" in General.

4.In this way, you can query the space that has been used and the space that can still be used.

Introduction to the different usage ranges of ROM and RAM.

RAM-Random Access Memory, high-speed access, equal read and write times, and independent of address, such as computer memory.

rom-read only memory. Information is not lost after power failure, such as the BIOS chip used to boot the computer. Access speeds are low, (compared to RAM) and cannot be rewritten.

Because it can't rewrite the information and can't be upgraded, it's rarely used nowadays.

EPROM, EEPROM, Flash ROM (NOR Flash and NAND Flash), the performance is the same as the ROM, but it can be rewritten. Generally, readouts are faster than writes, and writes require a higher voltage than readouts (5V read, 12V writes). The flash can be read and written at the same voltage, and the capacity is large, the cost is low, and now it is widely used in U disk and ***.

In a computer system, RAM is generally used as memory, and ROM is used to store some hardware drivers, that is, firmware.

Phone Settings, My Devices, Storage, you can see your phone's storage.

Install Master Lu on your phone, test it and you can see the real-time usage status of the phone's memory.

1. Connect the mobile phone and the computer with a data cable first.

2. After the mobile phone and computer are successfully connected, open the computer management page.

3. Enter the computer management page, and then you can't see the phone memory, click the phone drive.

4. Click to enter the mobile phone driver management interface, and you can see the memory of the mobile phone and the current remaining memory.

1. To check the physical memory of the phone, it is to check the phone's built-in memory and SD card.

of storage, we first open the settings function of the phone, and then inside we can see the storage options.

2. After opening the storage option, you will see your phone's built-in memory, built-in memory, SD card or TF card.

The memory capacity is up, and then adjust each other to install the software.

toAndroidFor example, the operation of the mobile phone is as follows:

1. Find File Management on your phone's desktop.

2. After entering File Management, find the Memory and Storage options, and click to open, as shown below.

3. After entering, find the SD card option in it and click to open it, as shown below.

4. Open the SD card option, we can transfer the software in the phone to the SD card to save the memory of the phone.

If you are using a vivo phone, go to Settings - RAM & Storage - to view the storage space. (Due to the different configurations and functions of each model, some models need to go to Settings - More Settings - Storage for viewing.) ）

If you want to check the storage space of your vivo phone, go to Settings - Storage and Storage - to view the storage space. (Some models need to go to Settings - More Settings - Storage to view.) ）

If you want to check the size of the purchased memory card, you can consult the purchased party brigade to understand, or you can install it in the mobile phone and enter the Wenbu or stool management interface to check the size of the memory card space;

Take Huawei P50 as an example, go to Settings > Storage to check the storage usage.