Who is better to use AutoCAD or ZWCAD?

First, the performance of the image.

Taking the commonly used 1MB, 10MB, and 100MB drawings as an example, ZWCAD's drawing opening speed is seconds, seconds, and seconds, respectively, which is the best compared to the mainstream CAD software on the market.

2. Compatible formats.

ZWCAD adopts the international standard industrial graphics file formats DWG and DXF as the internal storage file formats, which are fully compatible with the latest drawing formats and can directly read and save common drawing information, which is accurate and complete.

3. Two-dimensional cartography and.

ZWCAD can provide common 2D drawing functions, such as points, lines, curves, polylines, multilines, etc. In terms of object operations, common commands, including such as copy, scale, chamfer, round, pan, etc., can be satisfied. Smooth drawing needs are guaranteed. <>

Fourth, plug-ins can be supported.

ZWCAD has established cooperation with 200+ professional application developers at home and abroad, and can support plug-ins covering energy and power, highway transportation, engineering takeoff, collaborative design and management, etc., and mainstream plug-ins such as Tianzheng, Explorer, Southern Data, Yanxiu Toolbox, etc. <>

Whether it's good or not, you have to try to know, everyone's standards are different, I think ZWCAD is still very easy to use, at least to meet my drawing requirements and drawing habits, I am now using ZWCAD mechanical version, ZWCAD's drawing standards are very in line with international standards, the parts library is also very rich, basically if I want to find similar parts for processing and transformation is no problem, now I have also created an exclusive library, many parts can achieve reusability, reducing a lot of tedious work, Increased work efficiency. The above is my personal recommendation.

That's certainly AutoCAD good to use.

I used to use AutoCAD when I was in school, and it was very easy to use. But now that I am working, AutoCAD is not allowed to be used in the unit, and I can only use Zhongwang. Often stuck to death. And some of the features are not available, which is super uncomfortable to use.

The company is equipped with ZWCAD, the interface is beautiful, the operation function is simple, basically you remember a few commonly used toolboxes and you can start drawing. The operation and interface of this software vendor are similar to AutoCAD, and the running speed is fast. Reading and opening drawings are fast, compatibility is strong, and I personally think that ZWW is currently a CAD software provider that is doing well in China.

It's all good, there is little difference in performance, AutoCAD is needless to say, it's a big brand, but ZWCAD occupies a small memory and does not have high requirements for computer configuration, and the 20 version seems to have a large memory mode, and the large drawings are faster. As for which one to choose, you don't need to think too much about the software features, it depends on which CAD brand your budget can support.

None of them work well. ZWCAD wants to drop the keyboard once, I don't know people who have similar experiences.

ZWSOFT CAD is a two-dimensional product independently developed by ZWSOFT.

The CAD platform software has fast running speed and good stability, is perfectly compatible with mainstream CAD file formats, has a friendly interface, easy to use, and convenient operation, which can help users complete design drawings efficiently and smoothly. At the same time, it supports cloud mobile office, and through third-party cloud services, it cooperates with ZWCAD to realize cross-terminal mobile office solutions to meet more personalized design needs. In terms of specific functions and usage methods, there is no obvious difference between ZWCAD and foreign CAD software, which is also an important reason why many designers choose ZWCAD, after all, it can reduce the cost of relearning.

When it comes to domestic CAD software, another thing that has to be mentioned is localization services, which is very important for industrial software. The service agencies in Guangzhou, Beijing, Shanghai, Wuhan, Qingdao, Chongqing and other places can provide timely service support. In addition, ZW's unique customized development services also provide more possibilities to meet the personalized needs of enterprises.

At present, there are customized development solutions for many industries such as "plate typesetting, wafer design, communication, gardening", etc., which help further expand the application boundaries of CAD software and improve competitiveness.

Haochen's starting product is its secondary development software for water supply and drainage based on AutoCAD. This software is also available in the industry.

It is very famous.

Right. From the overall feeling of the software,Haochen's software is relatively fast,The interface is also very similar to AutoCAD,In addition, it has its original professional software development experience in the industry,Made a lot of gorgeous functions,Although it is useless,But it is still very good in the market publicity。 Haochen's software is very unstable, and the phenomenon of software crashes and hangs is very frequent.

In addition, in terms of secondary development, the secondary development based on itself and its own based on AutoCAD cannot be compared at all. Overall, the performance of Zhongwang and Haochen is still not as good as auto, if you have money, of course, you can use auto, to put it bluntly, it is Zhongwang and Haochen pirated auto company, but the pirated technology has not yet arrived at home.

It's almost the same to use, that is, AutoCAD is foreign, and the others are domestic.

There is basically no big difference, and the functions are almost complete. Personally, if you can use enough, try to use domestic products, which is also an act of buying expectations, after all, the state still strongly supports this aspect.

ZWG for domestic CAD, the software in the interface design and operation habits than AutoCAD more in line with the habits of the Chinese, TENGEN CAD is a drawing tool developed on the platform of AUOTOCAD, TENGEN must be based on AutoCAD to run, many designers today love TENGEN, is because TENGEN is more intelligent, drawing is more convenient.

Zhongwang and Tianhe CAD are mainly in the usual AutoCAD with some additional functions, such as architecture: doors, and windows do not need to be drawn, just insert it directly into the OK, if you do not have these functions when installing CAD, you can also ** an additional function drawing package can also be used! When designing furniture, you can just insert the furniture directly into it.

The main differences between ZWCAD and AutoCAD are as follows.

1. The company is different.

ZWCAD is a 2D CAD platform software independently developed by ZWSOFT. Tianzheng.

CAD is a drawing tool developed based on AootoCAD, an automatic computer-aided design software first developed by Autodesk in 1982.

2. The characteristics are different.

ZWCAD supports cloud mobile office through third-party cloud services.

via the interactive menu or command line.

can be used for a variety of operations.

3. The functions are different.

ZWCAD has superior performance, stronger stability, rich drawing functions, convenient command operation, and many new features such as batch printing, boundary grips, and cross-platform support, which can meet the deeper application needs of enterprise users. The AutoCAD multi-document design environment is easy for non-computer professionals to learn to use. In the process of continuous practice, we can better master its various application and development skills, so as to continuously improve work efficiency.

The difference between ZWCAD and AutoCAD

1. The windows are different. Just like the difference between using IE browser windows and other browser windows, ZWCAD window switching is easy to operate and convenient;

2. Select differently. ZWS only needs to click on the drawing page once, and then automatically drag it to the element part and click it again to select it, while AutoCAD needs to hold down the left mouse button to drag and select. Therefore, ZWCAD is more convenient;

3. The lines are different. The so-called different lines are mainly reflected in the cash. The same line width is used, which is extra thick in AutoCAD after opening, but it does not affect the printing;

4. The filling is different. Zhongwang filling materials are more comprehensive, while AutoCAD is relatively less;

5. The format needs to be converted. If you use ZW-2010 or later, AutoCAD cannot be opened, and you need to save it as AutoCAD format to open it, but it will not affect your use.

6. Different property rights. ZWCAD

It is a CAD software with independent property rights in China, representing the highest level of CAD software in China, and many local enterprises.

and designers are using Zhongwang; AutoCAD is a foreign software, which is used more abroad.

7. Choose differently. For enterprises, ZWCAD is more cost-effective, and has intimate localized services, so it is better and more suitable for after-sales service.