How to set the route of the cat of Chia Tai Huahong ZD6610?

IE in the knock-in.

Log in with the admin password dare.

Enter the WAN settings, at the virtual circuit 0, vpi, vci add the value of Shenyang Tietong is 0 35 (very critical) There is a saying on the Internet that you need to turn off the virtual circuit 0 other than the virtual circuit In fact, you don't need to, select the "packaging format" as "pppoe llc" (very critical).

Select "disabled" in the "Bridge" option

Type "Username" and "Password" in the "Username" and "Password" fields, and select Auto Redial and DHCP

NAT configuration.

Set the "NAT" option to "NAPT". (Very critical) click the "Submit" button to save the settings.

Click Save Settings in the user configuration bar to enter the Save Settings page. Click the "Submit" button, save all the settings above, and ADSL will automatically restart and run according to the set parameters.

After setting up, the stand-alone machine can access the Internet, connect to the computer on the first floor, and access the Internet through the hub, at this time, I also tested the D-Ling router that my friend gave to the customer.

Follow the instructions to log in to your router. PPPoe settings dialing, username and password are the username and password when you dial in Tietong. Everything else doesn't need to be set. Several computers are set up to automatically search for IP and DNS addresses.

Tietong's Chia Tai Huahong's ADSL Cat Route:

I think there should be a lot of people who need to set up the routing of the Chia Tai Huahong of Tietong, read a lot of articles on the Internet about the routing settings, and feel that the setting interface is different from that of Huahong, but Huahong's manual is like a middle school's "Physiological Hygiene" textbook written in a vague and faint way, which makes people incomprehensible:(。 Hurry up and find the method of setting it up and submit it, hoping to give some help to those who need it.

If you like it, you can top it. 1. Enter in the web page, enter the username and password, and enter the setting interface;

2. Enter the settings page, step 1 to open the bridge configuration, select the wan to wan bridge option at the top of the page, then select "bridging" to turn off, "bras" to turn on, other defaults, click submit;

3. Click Bridge Configuration, click Settings, and delete all virtual circuits other than "eth-0".

4. Click the EOA Settings option: delete all the interfaces in it, and don't leave any of them;

5. Click the ATM vcc option: delete all the interfaces in it, don't leave any of them, click Add after deleting, enter the ATM VCC-Add interface, and select the default for the VCC interface; Huai'an Tietong Ma 0 35.

6. Click PPP Settings. Go to the PPP settings page. Click Add to enter the PPP Interface - Add page.

PPP-0 for PPP interface AAL5-0 for underlying interface IP Filtering Type: Default Status for Start Protocol and PPPoe for PPPoeThe server name is not specified.

Enable DHCP and select Disable; Enable DNS; The default route is enable; Security protocols are selected according to local regulations. Fill in the login name and password; When you do broadband, Tietong gives it.,Needless to say, it's all filled out and submitted.。

7. After all the settings are completed, take a look at the running status in your PPP settings Link Up OK is done. The routing is ready, and the last thing to do is to click submit to restart. Select Save. After saving successfully, click Restart.

It's good to bring two machines and use a switch.

1. Enter in the web page, enter the user name and password, and enter the Lubian setting interface;

2. Enter the settings page, step 1 to open the bridge configuration, select the wan to wan bridge option at the top of the page, then select "bridging" to turn off, "bras" to turn on, other defaults, click submit;

3. Click Bridge Configuration, click Settings, and delete all virtual circuits other than "eth-0".

4. Click the EOA Settings option: delete all the interfaces in it, and don't leave any of them;

5. Click the ATM vcc option: delete all the interfaces in it, don't leave any of them, click Add after deleting, enter the ATM VCC-Add interface, and select the default for the VCC interface;

6. Click PPP Settings. Go to the PPP settings page. Click Add to enter the PPP Interface - Add page.

PPP-0 for PPP interface AAL5-0 for underlying interface IP Filtering Type: Default Status for Start Protocol and PPPoe for PPPoeThe server name is not specified.

Enable DHCP and select Disable; Enable DNS to enable; The default route is enable; Security protocols are selected according to local regulations. Fill in the login name and password; Click Submit when you have filled in all the forms.

7. After all the settings are completed, take a look at the running status in your PPP settings Link Up OK is done. The routing is ready, and the last thing to do is to click submit. Select Save. After saving successfully, click Restart.

Don't think you can open a route. Tietong's Chia Taihua chain with rotten macro modem can't open the route, it seems that the hardware has shrunk. Flash sells positive chips 512kb if such a cat. You're going to die of this heart!

No matter how you set it, you can't avoid P2P restrictions!

It's all the same as you, you can avoid P2P restrictions, and the bandwidth of Tietong has collapsed!

See if there's an option like this.