How to connect the wireless Wi Fi of the Apple mobile phone

Apple wifi can't connect to the solution 1: join the network.

Confirm that Wi-Fi is enabled and that you're connected to a Wi-Fi network. Press "Settings" > "Wi-Fi". If Wi-Fi is off, tap the On Off icon to turn it on.

Choose a network. The available Wi-Fi networks are shown below. Find and tap the Wi-Fi network you want to join.

Apple WiFi can't be connected Solution 2: Verify the password.

Some Wi-Fi networks require a password to join. A password-protected Wi-Fi network has a padlock icon. If you receive an error when joining a password-protected Wi-Fi network:

1.Type your password slowly to verify that you are entering the correct password.

2.If you can't tap Join, the password is too short for that Wi-Fi network.

3.If you don't know the password, contact your Wi-Fi administrator.

Apple wifi can't be connectedSolution 3: Check the connection.

In the status bar or Wi-Fi menu, check the signal strength of your Wi-Fi network. The higher the number of signal grids, the stronger the signal. If you only have one signal, or you still can't find your Wi-Fi network:

1.Please move closer to a Wi-Fi access point or router.

2.Avoid potential sources of interference that could affect your Wi-Fi signal, such as concrete walls or microwave ovens.

3.Next, use Safari to open a webpage to check the connection. When using some public Wi-Fi networks, Safari

A web page may be displayed that allows you to log in to use the Services. Check this webpage for more information about signing in or subscribing to Wi-Fi service at that location.

Apple wifi can't be connected to the solution 4: check the wireless LAN.

1.If you have a strong Wi-Fi signal but still can't access the Internet, verify that you're using a Wi-Fi network.

2.Confirm that you're connected to the correct Wi-Fi network and not to another nearby Wi-Fi network.

3.Check the cable connection of your Wi-Fi access point or router.

Apple wifi can't connect solution 5: Reset network settings.

To reset network settings, tap Settings > General, then scroll down and tap Reset > Reset Network Settings. After your device restarts, try to find and join the Wi-Fi network again.

Apple wifi can't connect solution 6: If you still have wireless LAN problems, please try the following options:

1.Check out the following additional tips for using Wi-Fi.

2.Use iTunes to update your iPhone to the latest software.

4.Get tips from other iPhone users in the iPhone forums.

How to connect the iPhone to wifi?

1. First click the "Settings" icon on the desktop, and then click the "Wi-Fi" function key on the "Settings" page, and you can also see the word "not connected" on the right side of the function key.

2. You can also pull up from the bottom to the screen of the Apple mobile phone, and a hidden page will appear, click the second icon (that is, the wireless network icon) on the left side of the top in the page.

3. Through the operation of the first step or the second step, the mobile phone will appear on the "Wireless LAN" page, and a list of some WiFi names that the mobile phone can receive wireless signals will appear below the selection network bar, and click on the wireless network that needs to be connected.

4. After clicking on the wireless network, the page of entering the network password will pop up, enter the password of the wireless network accurately in the "password" column, and then click "Join" in the upper right corner.

5. After successfully connecting to the wireless network, you can see that there is a "check" on the left side of the connected wireless network on the "wireless LAN" page, and the wireless network icon will appear at the top of the mobile phone screen.

iPhone can't connect to wifi, the main reasonThere are the following five:

1. System failure.

Apple mobile phone can not connect to wifi, it may be because of the mobile phone system network settings error caused by pure orange, when the apple mobile phone enters the correct wifi password, but has not been able to connect to wifi, this situation mostly occurs in the system network connection error.

When there is an error in the system network of the Apple mobile phone, you can turn off and restart the phone, and after restarting the phone, the wifi signal may be connected normally.

Or disconnect the currently connected Wi-Fi signal, and then re-enter the password again to connect to the signal to see if it can be connected normally.

Second, the router problem.

Apple mobile phone can not connect to wifi This situation mostly occurs in router failure, due to problems with router settings, the mobile phone may always be in a normal signal connection when connecting to wifi in a group, but it is unable to access the Internet, it is recommended to restart the router when encountering this problem, or re-set the router wifi, and check whether the router is broken, please replace it.

3. Hardware issues.

If the above reasons are all excluded and still can't connect to wifi, it is likely that the hardware signal of the mobile phone is broken or there are problems with other internal hardware, and you need to go to Apple after-sales service to request processing.

Fourth, the wifi signal is poor or some wifi problems with more connected devices.

If the wifi signal is too poor, it is easy to cause the normal connection to fail. In addition, in some public places, when connecting to some public wifi, the signal is very strong, and after entering the wifi password correctly, it is still not connected, this situation is mainly due to too many connected wifi devices, and a router can handle the limited connection of users, resulting in the back of the user, may not be able to obtain a valid IP address, so that the wifi can not be connected.

To solve the problem, you can try to set a static IP or restart the router, and then connect first.