What should be paid attention to in the use and maintenance of fishing rods?

Fishing friends came to the store to maintain the fishing rod, and Sister Pan asked him to wipe it with olive oil, and the effect was also good.

It is a fishing rod with an eye of heaven.

After being exposed to the sun for a day, of course, a lot of water in the rod is consumed, and then the rod is bored, and in the long run, it will produce "wind destroys the rod" and loses its ductility.

One day, it will suddenly break due to the lack of elasticity.

Maintenance method: After fishing, go home, first use a hot wet paper towel (up and down 50 degrees) to gently wipe the fishing rod back and forth, (called hydration and moisturizing), wait for 20 minutes to dry, and then change a velvet cloth to wipe the wax (there is no wax can ignite the candle and drip on the velvet cloth) Wrap the fishing rod and gently wipe it (called wax), and finally dry the rod around the body overnight;

It's a rainy day. Fishing, the fishing rod is wet by precipitation, although the rod has been wiped with a cloth when the rod is harvested that day, but the environmental humidity is still very heavy, the next day the fishing rod will still feel a little wet, after a long time, not only the surface of the fishing rod will fall off, and it will slowly wind (especially the second rod and even the first three sections of the fishing rod), when it encounters a wild river with weeds or a certain moment when the fish is caught, it will crack.

The way to solve this kind of thing is relatively simple, that is, after fishing in the rain, you must wipe each section of the fishing rod with a dry rag when you go home, and then sort it into natural ventilation to dry overnight. In addition, the fishing rod also needs to be waxed on time and maintained, not only the fishing rod is easy to hold up when in use, but also the service life will be greatly improved.

When retracting the rod or pulling out the rod, if it is in the case of the release group or the reel group, try to pull the rod out a little more, which can prevent the rod from contacting the handle section wall too much and hurting the rod joint, sometimes the slightly injured rod is not easy to find, and it is very easy to break the rod in the case of large individual fish.

After returning home, there is a lot of water in the used rod, and the front plug can be removed if it is not needed, and the water will be evaporated stronger. Fourth, the fishing rod seeps water, or when it is pulled out, it cannot be retracted with too much force. You can take out the stuck two sections and push them down at 90 degrees on the flat floor of hard grains twice.

If the card is too dead, use tin foil.

Wrap the ignition with an outer flame, bake it slightly for a few minutes, and try again.

After the fishing rod is sealed with the ring of the lost rope is very easy to rust, resulting in not strong, this has to be properly handled, the original ring can be removed with needle-nose pliers, replaced by a firm point of the line, must be firm six, the front of the fishing rod is lost, in fact, there is no need to buy **. Immediately attach the rod with an elastic rod strap to facilitate the evaporation of water from the rod.

1.It is a sunny day for fishing, the fishing rod is exposed to the sun for a day, the natural moisture in the rod is greatly destroyed and the celery grip is consumed, and then the rod is bored, and over time, it will form a "dry rod", lose its elasticity, and one day it will suddenly appear due to elasticity and break. How to take care of it:

When you go home after fishing, first use hot wipes (about 50 degrees) to gently wipe the fishing rod back and forth (called hydration), wait for 20 minutes, and then use a piece of flannel to wipe the wax (there is no wax to light the candle and drip it on the flannel) wrap the fishing rod and gently wipe it (called the wax), and finally dry the rod overnight.

2.It is a rainy day fishing, the fishing rod is wet with rain, although the fishing rod has been wiped with a cloth when the rod is harvested on the day, but the humidity is still very heavy, the next day to open the fishing rod will still feel a little wet, for a long time, not only the surface of the fishing rod will peel off, but also gradually wind (especially the second rod and even the first three sections of the fishing rod), encounter a hook to hang weeds or catch a certain moment of fish, there will be a breakage phenomenon. In this case, the maintenance method is relatively simple, that is, after fishing in the rain, you must wipe each section of the fishing rod with a dry cloth when you go home, and then arrange it in a ventilated place to dry overnight.

First, pull out each section of the fishing rod and use a small towel to tie the fishing line to wipe the water in the rod. Wipe the surface of the rod with a towel soaked in hot water and let the rod keep dry! Finally, apply the rod oil to the towel and wipe the rod evenly to increase the waterproofness of the rod.

Then just put the rod in a cool and ventilated place (remember not to expose it to the sun)!

The correct way to operate the fishing rod is.

1.When removing the sheath, pull it out directly above, and hard twisting and hard pry will cause the tail section to break.

2.When you start fishing the rod, you should align the front and rear wire rings of the row of slag, otherwise it will cause the main line to be wound around the rod or the tail tip to break.

3.Do not roll in the main line that is wound into a knot to prevent the rod from breaking.

4.Try to equip the pendant according to the requirements of the rod, and don't let the tail section be overstressed.

1. Prevent paint stripping.

In order to prevent the occurrence of this phenomenon, the water should be thoroughly wiped clean after use, and stored in a cool, dry and ventilated place, and the temperature should be below zero degrees Celsius.

2. Prevent rust.

If the unclean rod is sealed and stored, it may cause the natural fading of the plating, other parts, and the corrosion and rust of the metal parts, resulting in the damage of the tail parts, so it is necessary to wipe the salt, water and dirt clean before storage. (Note): Do not place the rod in the tail box of the car for a long time, long-term high temperature, closed place, it is very unfavorable to the rod, so please pack it up and place it in a ventilated place.

3. Problems that should be paid attention to in maintenance.

Do not use brushes, toothpaste, gasoline, alcohol and various organic solvents to wipe the rod body during maintenance, so as not to damage the coating of the rod. You can use a towel dipped in water to gently touch the dirt, and when it dries, polish the rod with car wax or leather wax.

4. Other precautions.

a. The fishing rod is a conductive body, and the rod body should be used in the fishing ground and any place other than to avoid accidents caused by electric shock. Do not use during thunderstorms or in environments where power lines are easily accessible.

b. During the use of the fishing rod, please confirm whether there are people around, so as to avoid the hook and lead fall injury and others.

c. Do not deadlift with a fishing rod when hanging on the bottom of the hook or hooking other foreign objects, but wrap the front end of the fishing line with a towel and then try to pull.

d. Before transportation, it is necessary to ensure the anti-impact packaging to avoid strong impact on the fishing rod during transportation.

Precautions for rod maintenance, proper maintenance of your fishing rod can increase the life of your beloved fishing rod.

How to properly maintain your fishing rod and extend the service life of your fishing rod, the fishing expert will teach you how to maintain it!

When returning home from fishing, wipe the rod clean, cool it dry, and put it in a ventilated place. If left on a damp ground for a long time, it will lose color and even blister. But there is no way to do some poor quality standard off color. I have 3 rods. From $80 to $800. The 80 yuan is always decolorized.

Fishing rod and fish wheel "maintenance"Do you know the method? If you do this, you will be able to use it for a few more years.

Professional rod and fishing reels should be maintained with fully synthetic grease. Tiger head hotolube and Total can be used, this grease does not have any color and smell, water resistance, lubricity and protection are professional grade, there is food grade safety certification, peach leopard leopard has 130 grams of small toothpaste packaging, easy to use.

When using, dip a little bit of the rod with a soft cloth, wipe the rod body and fishing reel, and then wipe off the excess with a clean cotton cloth, which is similar to shoe polishing, only a thin layer.

1. Prevent paint stripping If the wet and unclean fishing rod is sealed and sealed, the sealed moisture may cause the fishing rod to peel off paint or blister, in order to prevent this phenomenon, the water should be thoroughly dried after use, and the rod should be placed in a ventilated place to dry completely, and then sealed. 2. Prevent rust If the unclean fishing rod is sealed and sealed, it may cause electroplating, natural fading of fishing rod accessories and corrosion and rust of metal fittings, resulting in loss of function of guide eyes, wheel seats, tail bolts, etc. Therefore, the salt, water and dirt must be wiped clean before sealing.

3. Fishing rods must not be scrubbed with organic substances such as gasoline, thinner, and alcohol.

When fishing, some anglers will have a sudden break in one of the first three sections of the rod when the hook is hung on the weeds and the line is pulled a little hard (or when a small fish is caught), which is considered to be a problem with the quality of the rod. In fact, it is not the case, but it is caused by the lack of maintenance of fishing rods by anglers.

Here, let's talk about how to maintain a fishing rod:

In addition to the maintenance of the fishing rod in the usual use, we should pay attention to the gentle handling and do not put it on the rocks and sand at will, the key is to go home after fishing and carefully maintain the fishing rod.

1) It is a sunny day for fishing, the fishing rod is exposed to the sun for a day, the natural water in the rod is consumed a lot, and then the rod is bored, over time, it will form a "withered rod", lose its elasticity, and one day it will suddenly appear due to elasticity and break.

Maintenance method: After fishing, go home, first use hot wipes (about 50 degrees) to gently wipe the fishing rod back and forth, (called hydration), wait for 20 minutes, and then use a flannel cloth to wipe the wax (there is no wax to light the candle and drip on the flannel) wrap the fishing rod and gently wipe it (called waxing), and finally dry the rod overnight;

2) is fishing on rainy days, the fishing rod is wet with rain, although the fishing rod has been wiped with a cloth when the rod is harvested on the day, but the humidity is still very heavy, the next day to open the fishing rod will still feel a little wet, for a long time, not only the surface of the fishing rod will peel off, but also will gradually wind (especially the second rod and even the first three sections of the fishing rod), encounter a hook to hang weeds or catch a certain moment of fish, there will be a breakage. The maintenance method of this situation is relatively simple, that is, after fishing in the rain, you must wipe each section of the fishing rod with a dry cloth when you go home, and then arrange it in a ventilated place to dry overnight. In addition, the fishing rod should be waxed regularly and maintained frequently, not only the fishing rod will be good to hold up when in use, but also the service life will be greatly enhanced.

After fishing, pull out each section, carefully wipe off each section of the rod and the reel with a towel and dust and water stains, keep it dry, and do not expose it to the sun. Dry and put back into the fishing gear bag; If it is a hand rod, it is necessary to exit each section in turn, wipe off the dust and water and dry it thoroughly before reinstalling it, so as to protect the paint surface of the fishing rod. If you are particular about it, you should also apply a thin layer of guard oil.

Fishing rod maintenance should be a regular job for anglers. The rod is well maintained to prevent scratches, scratches, cracks or peeling of the patent skin; Therefore, it prevents premature aging and deterioration of the rod and prolongs the service life. What's more, maintaining a fishing rod is also a treat for anglers.

Maintenance is all about protection and conservation, from the arrival of a new rod to the end of each fishing session.

First of all, after the end of fishing, be sure to wipe the water on the fishing rod with a dry towel, and then put it in a hand rod bag to take home, if it is placed there, because there will be residual water on the inner compartment of the fishing rod, and it will further corrode the paint on the rod surface, which may cause the fishing rod to peel off paint or bubbles, so after going home, the fishing rod must be taken out of the rod bag and further wiped again, and then the rod plug at the end of the rod and the rod tail are removed, and the standing one is placed in a relatively dry, ventilated and not easy to touch place to dry. Then mothballed.

Secondly, the maintenance method of the sea rod, rock rod and hand rod is basically the same, but because there are metal parts on the sea rod and the rock rod, it is necessary to be more careful in the maintenance, if the unclean fishing rod is sealed and sealed, it may cause electroplating, natural fading of other accessories and corrosion and rust of metal fittings, resulting in the loss of function of the guide eye, wheel seat, tail bolt, etc. Therefore, the salt, water and dirt must be wiped clean before sealing. Fishing rods should never be scrubbed with organic substances such as gasoline, thinner, alcohol, etc.

Then wiping the rod when reeling is an important part of rod maintenance. When fishing outdoors, the wind and dust particles of nature will always adhere to the surface of the rod, and in addition, the impurities in the water will also condense in the rod section of the rod. If these things are not removed, they can cause serious damage to the rod.

The practice is to wipe the rod from the end of the rod with a damp paper towel before each reel, section by section, to ensure that the adhesion on the surface of the rod is wiped as much as possible. Do not use a towel to wipe the rod, especially a dry towel, as it will also scratch the paint of the rod while wiping off the dust.

Finally, the fishing process is the process that is most likely to hurt the fishing rod, and the protection awareness of the fishing rod should be improved and the operation behavior should be standardized. I must use a rod holder every time I fish, it is not only convenient to adjust the wind line and water line, easy to hold the rod and raise the rod, but more importantly, it avoids contact with the sand, gravel and soil on the shore, which greatly reduces the chance of scraping the fishing rod. When catching a big fish, walk the fish fully according to the fishing power of the rod, and do not pull hard.

When copying fish, the right hand holds the rod and the left hand to copy the net, and the two hands cooperate in the division of labor. Immediately after the fish is caught in the net, the rod is placed on the rod holder with the right hand. Drag the fish to the shore with both hands, then hold the net frame with both hands to lift the fish out of the water before picking the hook and other activities.

It is important not to hold the rod and hold the fish at the same time with both hands, as it is very easy to scratch the rod or even break the tip of the rod.