Franck Muller Franck Muller repair point watch what to do if it is magnetized

Updated on vogue 2024-03-20
10 answers
  1. Anonymous users2024-02-07

    How to deal with the watch stopped by magnetization:

    Holding the watch slowly close to the hair dryer, note that you should always keep it in one direction, and then move away slowly, generally to eliminate the lighter magnetism.

    Using the degausser, press the red button to open it first, face the watch upwards, keep a certain distance from the demagnetizer, (the mobile phone watch cannot be directly attached to the demagnetizer) pass through the left and right (or from right and left) at a constant speed.

    For some watches, it comes with an anti-magnetic device, if there is magnetism, then you should go to a professional watch repair shop to ask the maintenance personnel to replace the anti-magnetic device and demagnetize.

  2. Anonymous users2024-02-06

    Shanghai Watch Service Center is located in Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District, Shanghai.

    Methods of degaussing.

    First, it is a professional demagnetization of the watch shop.

    Methods of degaussing.

    2. If you are far away from the watch repair shop, you can also demagnetize yourself, the specific method is: find a piece of iron that is hollow in the middle and is not affected by magnetization, stand firmly on the table, and then the magnetism on the watch can be "sucked" by the iron block to restore the watch to normal. It is to use a magnetized iron can, the two ends are connected, and the magnetized love watch is put back in the iron can and can be demagnetized for 5-6 minutes.

  3. Anonymous users2024-02-05

    The magnetic field is everywhere, and it is impossible to prevent it, and it turns out that with a good end of the watch, the error suddenly becomes larger, and the first thing to guess is whether it is magnetized. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so watches are very susceptible to magnetization. Once the mechanical watch is magnetized, the impact is first of all to increase the error, and in serious cases, it will also stop the watch.

    When wearing a watch, if the watch accidentally comes into contact with a generator, motor or other objects with a strong magnetic field, or if the watch is left on the radio or TV, the watch will be magnetized, and the watch will be inaccurate, or even stop. In this case, you should go to the watch repair department as soon as possible to repair it to a professional to ensure that the watch will not cause more inconvenience to your daily life after it is demagnetized. Therefore, I would like to remind you that when wearing a watch, you must pay attention to keeping the watch away from objects with strong magnetic fields.

  4. Anonymous users2024-02-04

    There is a part in the watch called the hairspring, which is a very thin spring, usually made of steel, coiled around the balance wheel; The balance spring system of the watch is like the human heart, which is the most important part of the whole watch, and its movement directly affects the precise operation of the watch.

  5. Anonymous users2024-02-03

    Hello, the watch will cause the problem of inaccurate time after being magnetized, although the quartz watch will not be magnetized, but there will be a phenomenon of stopping in a strong magnetic field. Therefore, when using the watch in daily life, it must be kept away from the magnetic field, away from TV, radio, induction cooker, etc., which will be magnetized due to long-term contact.

  6. Anonymous users2024-02-02

    Franck Muller aftermarket watch repair points are as follows:

    1. Nanchong Franck Muller Maintenance Service Department.

    2. Franck Muller & Muller maintenance, Franck Muller & Muller maintenance of the whole series.

    3. Guangzhou Frank Muller maintenance point.

    4. Shenzhen Frank Muller watch after-sales maintenance point.

    5. Franck & Müller Maintenance Center in Shanghai, China.

    Room 709, 7th Floor, Block 1, Grand Gateway Plaza Center, No. 1 Hongqiao Road, Xujiahui, Shanghai.

    How to care for your Franck Muller watch

    1. We must pay attention to the maintenance of the watch when wearing it. When we receive our beloved watch, be sure to put away the box that is used to protect the watch.

    2. When you don't wear the watch, you can give the watch the safest protection to avoid it being broken or collided. So, be sure to keep the watch box.

    3. It is recommended to put the watch in the packaging box when you don't usually wear it, which can greatly reduce the chance of damage to the watch.

    4. Under normal circumstances, the allowable error of mechanical watches is about 30 seconds per day, and the allowable error of quartz watches is about 15 seconds per month. The analogue quartz two-hand watch sets the time one minute faster. This is because the needle does not move immediately after pressing the handlebar.

  7. Anonymous users2024-02-01

    With more than 30 Franck Muller watch maintenance experts, including 3 senior technical consultants, 10 senior technicians, and more than 10 junior and intermediate technicians, Franck Muller has formed a national professional Franck Muller maintenance service team.

    Why does a Franck Muller watch fog when it goes?

    1. When this happens in your watch, it is because there is relative humidity in the air, and the inside of the watch is the same, fogging is one of the more common symbols.

    2. It may also be that the text difference on both sides of the watch is large, which causes fogging in the watch. And when the water molecules in the air inside the case enter the surface of the watch glass, the moisture freezes in the form of fine particles.

  8. Anonymous users2024-01-31

    Repair Frank Muller Point Aftermarket** is 400-601-4691.

    Hailing from Geneva, Switzerland, Franck Muller is one of the world's most recognizable luxury watch brands, and although it is considered a classic in the world of watches, Franck Muller has always been happy to combine watchmaking savoir-faire with boundless creativity. The tonneau-shaped body image and the exaggerated numerals are the hallmarks and hallmarks of the Franck Muller brand. Today, although the brand is only a dozen years old, it has become a classic watch brand.

    Frank Muller has after-sales service centers in Beijing, Shanghai, Guangzhou and other places, and the after-sales maintenance service center provides repair services, scratch polishing, maintenance and refurbishment, water ingress repair, adjustment meter take-out, etc., providing two service methods of in-store repair and mail maintenance, and the after-sales service is 400-601-4691.

    Brand Journey

    Since 1983, Franck Muller has been the driving force behind the revival of Swiss watchmaking with his drive and talent. Over the past 20 years, Franck has been impressed by a number of world-class titles and patents, as well as challenges and major achievements.

    This amazing watchmaking complication and aesthetic art is highly sought after by watch enthusiasts all over the world. Every year, Franck Muller unveils a world's first and unique complication that collectors from all over the world rush to pre-order.

  9. Anonymous users2024-01-30

    The Frank Muller pit points are as follows:

    3. Shengtian network address: 7th Floor, World Trade Plaza, No. 686 Jiefang Avenue, Jianghan District. Main business: Franck Muller maintenance center, Franck Muller maintenance center, after-sales**: 400-258-4561.

    4. Suntech Institution Address: 4th Floor, Building 3, Optics Valley Italian Style Street, Luoxiong Road, Hongshan District. Main business: Franck Muller Service Center, Frank Muller maintenance, after-sales**: 400-546-1495.

    6. Flame Culture Address: No. 93, California Commercial Plaza, Siming District, Food Street. Main business: Franck Muller maintenance, Franck Muller authorized center, after-sales**: 400-549-1279.

    7. Xiamen Frank Muller Warranty, Qianniu E-commerce Address: No. 50, Huizhan North Lane, Huizhan Road, Siming District. Main products: Franck Muller Warranty Center, Franck Muller Maintenance. After-sales**: 400-198-4537.

    8. Xiamen Frank Muller maintenance, Caida network address: No. 20, Huming Road, Siming District. Main business: Franck Muller maintenance center, Franck Muller authorization, after-sales**: 400-524-5498.

    10. Shengjing electronic address: south side of China Mobile, No. 7-2, Hero Mountain Road, Shizhong District. Main business: Franck Muller repair center, Franck Muller warranty, after-sales**: 400-159-1245.

  10. Anonymous users2024-01-29

    Shandong Jinan After-sales Service Center: Room 907, 9th Floor, Greenland Center Office Building, No. 25 Gongqingtuan Road, Shizhong District, Jinan City; Shandong Qingdao After-sales Service Center: Room 2204, 22nd Floor, Block B, China Resources Building, Vientiane City, No. 6 Shandong Road, Shinan District, Qingdao.

    Frank Muller After-Sales Service Center: Service **400-059-1957, open 09:00-19:

    If one of the following situations occurs, it is not covered by the warranty, and professional spring maintenance services can be provided at a reasonable cost.

    Not covered by warranty: normal wear and tear and aging of watch parts, including case, crystal, clasp, crown, case back, front bezel, strap; Damage to the product caused by failure to follow the instructions for use or abnormal use (e.g., impact, knock, crush); Unauthorized dismantling of the watch by yourself, such as battery replacement, repair, etc.

    Brand history

    Franck Muller, a brand that started as an independent designer, has swept the ** watch market in just over 10 years with avant-garde creativity and subversive time reading concepts. Most people are familiar with well-known watch brands, with a history of as short as 50 years or as long as more than 100 years, which not only helps the brand accumulate popularity, but also is a guarantee of the quality of the watch.

    However, Franck Muller, a watch brand that has become popular rapidly in the past 10 years, can still emerge in the ** watch market despite not having these strong backgrounds, and the reason for this is also very intriguing.

    His namesake watch designer, Franck Muller, was a member of the Association of Independent Watchmakers (AHCI), an association of watchmakers who created watches that boasted a high degree of complexity and exclusivity, which is why Franck Muller became so popular.

    Since the establishment of the brand in 1983 under the name of Franck Muller, several distinctive watches, such as the Crazy Hours and the Color Dreams, have expressed Franck Muller's creativity and sophistication.

    Reference: Encyclopedia - Frank Müller.

Related questions
15 answers2024-03-20

Hello, glad to answer for you.

What should I do if my Franck Muller watch gets into water? Common influent treatment methods: >>>More

12 answers2024-03-20

ForThe Frankfurt SchoolReviews: >>>More

18 answers2024-03-20

Insufficient kinetic energy, insufficient winding, insufficient kinetic energy, gear failure, lack of maintenance, etc., will now cause the watch to stop, and you need to go to a professional repair center for testing and processing. The specific situation needs to be tested and processed by a technician, and it is recommended to consult in detail.