Franck Muller Service Center, repair Franck Muller point after sales

Hello, glad to answer for you.

What should I do if my Franck Muller watch gets into water? Common influent treatment methods:

The first method: wear the watch glass inward, the bottom case outward on the wrist, the water vapor in the watch glass will disappear after two hours, if the watch water is more serious, it needs to be sent to the repair center for maintenance, to avoid rust of watch parts.

The second method: wrap the watch tightly with several layers of paper or velvet cloth, place it on a 40-watt bulb about 15 cm, bake for about 30 minutes, the water vapor will be eliminated, remember, avoid baking the watch directly next to the fire, so that the watch is not deformed by the heat. If the watch is seriously flooded, it is still necessary to send the watch to the main repair to prevent the internal parts of the watch from rusting.

The third method: use the silicone directly to place the water-filled watch and the silicone together in a closed container. In a few more hours, take out your watch and the water will be gone. This method is relatively simple and does not compromise the accuracy and longevity of the watch, but it does affect the timekeeping of the watch.

Of course, we still recommend that you send your watch to a professional repair center for treatment after the watch is in water, which can prevent the watch from being more seriously damaged and corroded.

Hello, glad to answer for you.

Daily repair methods for water ingress in the watch:

1. Dry the granules with silica gel. If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

3. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe. (It is not recommended to use the above methods to deal with it, it is recommended to go to the after-sales center for maintenance).

Way. 1. If the watch is soaked in water, you can use several layers of toilet paper or fluffy cotton cloth that is easy to absorb moisture to wrap the watch tightly, put it near a 40-watt incandescent lamp about 15 cm, bake for about 30 minutes, and the water vapor in the watch can be water vapor. Avoid baking the watch on the wrist close to the fire, so as not to cause the watch to suffer thermal deformation.

Way. 2. The watch is worn inwards and the bottom case outward, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to send it to the watch shop immediately to wipe the oil and sweep away the nutrients of the movement to prevent the parts from rusting.

Way. 3. Use granular silicone to put the watch on the wrist that has accumulated water into a tightly sealed utensil, and after a few hours, take the watch on the wrist, and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has absorbed water many times can be dried at 120 for several hours, and the water absorption experience is renewable, and it can be used again and again.

What should I do if my watch gets water?

1. If the watch is soaked in water, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes, and the water vapor in the watch can be eliminated.

2. Put it in a rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

3. You can use a granular substance called silica gel to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear.

4. Take a hair dryer to dry, and then apply a layer of transparent nail polish on it to avoid impurities and prevent rust.

5. If there is water vapor in the watch, you can wear the watch face inward and the bottom shell outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

It is normal for the watch to enter the water, and the following is an explanation of the water treatment method of the Franck Muller watch: 1. Dry the granules with silica gel. 2. Bake with a light bulb. 3. Wear the watch backwards. 4. Send the watch shop to wipe the oil.

The following methods can be taken for the water intrusion treatment of the watch:

Method 1: Put the granular silicone into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear. This method does not damage the timekeeping and components of the watch;

Method 2: Lamp baking method: Wrap the watch in water with a paper towel, put it at about 15 cm near a 40-watt light bulb, and bake for about 30 minutes. Never roast over fire;

Method 3: Put the surface face inward, the bottom shell facing outward, and wear it on the wrist, and the moisture can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

Generally speaking, there are only three places where water can enter the watch movement: the handle (handle), the watch mask and the back cover. The waterproof device is also installed in these three places: add a rubber ring to the shank, add a rubber ring on the threaded edge of the back cover of the sealing ring, shank and other parts, and make the surface tight.

Water and fog into the watch has the greatest impact on the watch movement, and it should be dealt with in time to prolong the service life of the watch. If not treated in time, the residual moisture will easily cause the internal movement to oxidize and rust, resulting in inaccurate watch timekeeping and watch failure.

If the watch is seriously flooded, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage. You can click on my homepage ** to consult, I hope to help you.

Scope of Services. 1. Maintenance service.

The watch is wet, the watch is wet, the watch is fast, the watch is slow, the watch stops, the watch does not go, the movement is rusty, the dial is rusty, the case is rusty, the luminous fails, the time is faulty, the watch is magnetized, the back cover is loose, the circuit is faulty, and the return to the factory service.

2. Maintenance service.

Watch oil washing, movement maintenance, appearance maintenance, scratch treatment, dial refurbishment, strap refurbishment, watch mask polishing, etc.!

The service center provides services for customization, cleaning, maintenance, identification, refurbishment, fault repair, replacement of damaged exterior parts and replacement of strap of Franck Muller watches. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

When the watch is in water and fog, the easiest way is to wear the watch on the wrist backwards, that is, let the watch mask reflect inwards and the bottom case of the watch face outward. After a few hours, you will notice that there is less and less moisture inside the watch.

Prepare some paper towels or moisture-absorbing flannel, wrap the watch tightly, place it on a 40-watt light bulb about 5 cm, and bake it for about half an hour. After that, you will notice that the moisture in the movement slowly disappears.

Fog can also be removed by basking in the sun. First open the back cover of the watch, then wrap the watch completely with a paper towel or moisture-absorbing flannel cloth, and take it to the sun for most of the day to remove the moisture in the movement.

After the watch is flooded, you can open the back cover of the watch first, remove the battery, and use the hair dryer to blow on the watch on low speed. After blowing until it is completely dry, reattach the back cover. When installing, you can also check whether the sealing ring is aging and broken, and remember that the back cover must be fastened if it is in good condition.

Dry the granules with silica gel. Put the silicone granular substance in a closed container with the watch that has accumulated water, and after a few hours, remove the watch and the water will disappear.

The solution to the water in the watch and the fog on the mirror:

Wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under the light bulb for about 30 minutes to eliminate the water mist inside, but do not put it close to the light bulb or bake it directly, so as not to cause the surface to be deformed by heating.

Wear the surface inwards and the bottom case outwards on your wrist to remove the mist from the surface after a few hours.

If you have silicone, you can put the silicone and the watch in water into a closed container, and after a few hours, take the watch out again, and the water mist in the watch will disappear.

If the water ingress of the watch is serious, it is best to send it to a watch shop to wipe the oil and eliminate the water in the watch to avoid rust on the parts of the watch.

Note: In order to prolong the service life of the watch, you should try to avoid fog and water droplets in the waterproof watch, do not wear the watch when washing your face, bathing, swimming and other "hydrophilic" activities, do not be affected by water vapor and hot vapor, and pay more attention not to be exposed to rain on rainy days.

How to deal with water ingress into the watch:

If you accidentally get water inside your case, you can use a granular substance called silicone to put it in a meter-closed container with the watch that has accumulated water, and after a few hours, you can remove your watch and the water will disappear. This method is simple, convenient and economical, and does not compromise the accuracy or longevity of the watch. In addition, the silica gel that has absorbed water many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

Method 2: If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near the 40-watt light bulb, and bake for about 30 minutes, and the water vapor in the watch can be eliminated. Do not bake the watch close to the fire, so as not to deform the watch by heat.

If there is water in the watch, you still have to go to the repair shop to wipe the oil and maintain it to prevent the parts inside from rusting.

Repair Frank Muller Point Aftermarket** is 400-601-4691.

Hailing from Geneva, Switzerland, Franck Muller is one of the world's most recognizable luxury watch brands, and although it is considered a classic in the world of watches, Franck Muller has always been happy to combine watchmaking savoir-faire with boundless creativity. The tonneau-shaped body image and the exaggerated numerals are the hallmarks and hallmarks of the Franck Muller brand. Today, although the brand is only a dozen years old, it has become a classic watch brand.

Frank Muller has after-sales service centers in Beijing, Shanghai, Guangzhou and other places, and the after-sales maintenance service center provides repair services, scratch polishing, maintenance and refurbishment, water ingress repair, adjustment meter take-out, etc., providing two service methods of in-store repair and mail maintenance, and the after-sales service is 400-601-4691.

Brand Journey

Since 1983, Franck Muller has been the driving force behind the revival of Swiss watchmaking with his drive and talent. Over the past 20 years, Franck has been impressed by a number of world-class titles and patents, as well as challenges and major achievements.

This amazing watchmaking complication and aesthetic art is highly sought after by watch enthusiasts all over the world. Every year, Franck Muller unveils a world's first and unique complication that collectors from all over the world rush to pre-order.

The maintenance address is located in Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District, Shanghai.

Use silica gel to dry the granules. If water enters the case, a granular substance called silicone can be used to put the watch in an airtight container with the water that has accumulated water, and after a few hours, remove the watch and the water will disappear.

This method is simple and economical, and the accuracy and longevity of the watch will not be compromised in any way. The silica gel, which has been absorbed many times, can be dried at 120 degrees for several hours, has a renewable water absorption capacity, and can be used again and again.

Bake hot with an electric light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes, which will eliminate the moisture. Be sure not to bake the watch mask directly near the fire to prevent the watch from being deformed by heat.

Here's the final step, when adjusting to the previous day's date, pull out the crown of the watch again. Re-enter the "Adjust Time" state, and after seeing that all the watch hands are stopped, I start to adjust the time clockwise, and when it is close to 12 o'clock, I find that the date has jumped.

It means that it has entered today's time (if the date does not change after 12 o'clock, it means that it is still the time of the previous day, and the time will continue to be adjusted to 12 o'clock in the evening). When the date changes, adjust to the current time to push the crown back completely. A normal rotation of the pointer is fine.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.