Where is the Franck Muller watch repair center, Franck Muller watch after sales service center

Insufficient kinetic energy, insufficient winding, insufficient kinetic energy, gear failure, lack of maintenance, etc., will now cause the watch to stop, and you need to go to a professional repair center for testing and processing. The specific situation needs to be tested and processed by a technician, and it is recommended to consult in detail.

There are many reasons for the watch to stop secretly, but in addition to malfunctions, there are also problems with wearing habits that lead to insufficient power and stop-and-go. There are also yes, first of all, make sure that you have enough time to wear it every day, see if this situation will happen, and don't take it off and put it on the table as soon as you get to the office or when you get home.

If you ensure at least 7-8 hours of wearing time every day, there will still be a sneak stop, then it may be because the watch needs to be washed, of course, the watch you just bought generally does not say that you need to maintain the oil immediately, but it is possible that the watch you bought is in the counter for a long time, and some of the watches that are pressed in stock may be placed in the counter for a long time, if the counter has not been sold, put the watch for several years, because the internal lubricating oil is naturally aging, it is also necessary to wash the oil, Of course, this situation is very rare, because after all, it will not go away if you put it there, but it will not age so quickly if you put the lubricating oil.

There are many reasons why Franck Muller watches do not go, such as: bumps, misalignment of movement gears, magnetization of the watch, long shelf time and dry oil sludge, etc., will cause mechanical watches not to go.

If the reason why the mechanical watch does not go is not because of insufficient kinetic energy, it is that the mechanical watch is faulty and needs to be sent to a professional maintenance personnel for repair. Remember not to talk about mechanical watch disassembly yourself.

Whether it is a manual or automatic watch, its principle is driven by mechanical gears and mainsprings, and friction will inevitably occur when turning, so it is necessary to add oil and lubrication after a long time to reduce the wear rate of parts.

Precautions for the use of mechanical watches]:

1. It is forbidden to adjust the time between 10 p.m. and 2 a.m.

2. Be sure to push the handle back to the end after the watch is adjusted.

3. According to the national standard, the timing error of mechanical watches (including mechanical automatic watches) should be controlled within 45 seconds.

4. The automatic mechanical watch requires the user to insist on wearing it normally every day and having an appropriate amount of activity, so that it can continue to be on the bar, maintain power and operate normally. It is normal for the wearer to walk slowly when the wearer is less active. For the first use, rotate the shank 20-30 times to allow the mainspring to be wound initially.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy.

2. Gear failure.

3. Lack of maintenance.

Hello, happy to answer this question for you.

What should I do if the watch is gone?

1.When the watch hands suddenly stop leaving, we have to pay attention to whether it is caused by the watch battery is dead, if this is the reason, just replace the battery to solve the problem.

2.The watch may not go suddenly due to a strong impact or water, so you should pay attention to protect the watch and pay attention to waterproof and drop-proof.

3.It may also be caused by the loss of magnetism of the watch, because the watch itself has a certain magnetism, so you can't put the watch with the mobile phone bank card for a long time.

4.Friends who lack experience in repairing watches should not disassemble the machine by themselves, because there are many small parts in the watch, and it is better to take a professional repair shop to repair the watch if you want to repair it.

The reason why the mechanical watch stops is that if it stops under the premise that it has not been bumped, it is usually due to a lack of power, you can fill the mainspring every morning to see if there is still such a stoppage. If this is still the case, it is recommended that you go to a professional repair shop and let the master check it. In addition, the mechanical watch should be fully maintained in 3-5 years, and the oil should be washed and lubricated to ensure that the internal parts of the movement can operate normally.

Tianjin International Financial Center, there are professional technicians here to solve any problems with the watch for you, it is recommended to call ** for detailed consultation.

Reasons why the watch doesn't go:

The main core gear is misaligned, the watch is magnetized, bumped, and the oil sludge is dried for a long time. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.

When the mechanical watch suddenly stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

Reasons and treatment methods for the watch not to go:

1. Lack of power: Some friends do not wear watches every day, or they wear them for a short time every day, which leads to insufficient power of automatic mechanical watches and watches not leaving. Automatic watches wind the watch by moving the arm, and if you don't exercise enough or don't wear it, the watch won't go.

This principle is the case with various brands of automatic watches.

The solution: wear more, exercise more, and remember to wind it when you don't wear it.

2. Dead battery: The most common reason why the quartz watch does not go is that the battery is dead. This is the first consideration of quartz watch abrupt stop.

The solution: Replace the battery with a new one.

3. Damage to internal parts: damage to quartz oscillator or failure of circuit board.

The solution: replace the quartz oscillator, if it doesn't work, you need to replace the circuit board.

4. The watch has not been maintained for a long time: too much dirt in the watch, jamming the gears or making the battery in poor contact will cause the quartz watch to not go.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

The reasons for the watch to stop are as follows:

Kinetic energy is insufficient, and automatic watches use the movement of the arm to complete the winding. If the watch is left for too long or the amount of arm movement is less every day, the mainspring energy of the watch will be due to insufficient winding, and it is easy to produce inaccurate timing or night stopping.

The hairspring is faulty, and the clockwork will be tighter if the amount of exercise is large. If there is a problem with the upper bar mechanism that causes insufficient power, it generally appears between 9 o'clock and 12 o'clock in the evening, "with a calendar function table" because at this time the hour wheel begins to drive the calendar wheel, and the load is large, if the power is insufficient, it is easy to stop during this time period. This time should not be reversed dial pin, now many mechanical watches use plastic parts of the calendar wheel, accidentally will break the gear, once the tooth is broken, every day at this time will be stuck, or to a fixed date will no longer jump.

As a result, the mechanical watch was stopped.

Bump failure, the watch is a precision instrument, once the bump receives a violent vibration, then the parts may fall off or damaged, you can make the watch steal stop.

Hello, it may be a lack of motivation. If you need to wind a mechanical watch by hand.

Generally, the normal winding takes 30 times, and it is basically full, (provided that you want to be full) The winding watch on your hand actually doesn't matter, as long as you keep it up until you can't turn it, the mainspring is full.

For automatic watches, because most automatic watches can be wound by hand, especially when worn for the first time or after stopping, you need to start the winding with your hand first. (It is recommended that you do not rely on the rotor to wind the full string at the beginning) everyone also knows that because the automatic watch is "not up to the string", it is recommended that the number of winding times of the automatic watch should be more than less, and you may wish to put a few more, such as up to 40 times, it is basically guaranteed to be full.

Reason for stopping:

The more common reason may be the lack of kinetic energy, automatic mechanical watches do not need to be manually wound, but to keep the mechanical watch on the hand to wear at least 8 hours of time, because the automatic mechanical watch uses the arbitrary swing of the rotor to wind up, and the rotor swings with the movement of the arm, so if the mechanical watch needs to be worn on the hand often.

But if you often wear it on your hand and don't walk, it may also be a lack of kinetic energy, and then we need to manually wind it.

After the above methods, the machine is not gone, here we can rule out the reason for the lack of kinetic energy of the mechanical watch, it should be the failure of the mechanical watch, if you are not a watch professional, it is best not to disassemble it rashly, please send it to a professional watch repairer for repair.

There are many reasons why the watch is not gone, and the repair center of Franck Muller Watches Shanghai is on the 10th floor of Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District. The watch does not go is generally caused by the lack of kinetic energy reserve, the automatic mechanical watch only needs to shake the watch to charge the watch, and the manual mechanical watch needs to manually tighten the spring to provide kinetic energy for the watch and restore the operation of the watch.

It is also possible that the watch has been hit or impacted: the watch is very tight, and if it is hit or hit, it may cause loose damage to the internal parts or cause problems with timekeeping.

The maintenance address is located in Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District, Shanghai.

Use silica gel to dry the granules. If water enters the case, a granular substance called silicone can be used to put the watch in an airtight container with the water that has accumulated water, and after a few hours, remove the watch and the water will disappear.

This method is simple and economical, and the accuracy and longevity of the watch will not be compromised in any way. The silica gel, which has been absorbed many times, can be dried at 120 degrees for several hours, has a renewable water absorption capacity, and can be used again and again.

Bake hot with an electric light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes, which will eliminate the moisture. Be sure not to bake the watch mask directly near the fire to prevent the watch from being deformed by heat.

Here's the final step, when adjusting to the previous day's date, pull out the crown of the watch again. Re-enter the "Adjust Time" state, and after seeing that all the watch hands are stopped, I start to adjust the time clockwise, and when it is close to 12 o'clock, I find that the date has jumped.

It means that it has entered today's time (if the date does not change after 12 o'clock, it means that it is still the time of the previous day, and the time will continue to be adjusted to 12 o'clock in the evening). When the date changes, adjust to the current time to push the crown back completely. A normal rotation of the pointer is fine.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

Introduction to Rui Diamond Watch: There are many reasons why the watch is not accurate, the main one is that it is not used in accordance with the specifications during the use of the watch. Here are a few reasons why.

Effect of swing.

The impact of location changes.

Effect of temperature changes.

Effect of magnetic field.

The impact of shock shocks.

The most ordinary watches basically only have the function of hours, minutes and seconds, but human intelligence is endless. Some watches also have other functions in addition to the chronograph function, such as world time, minute repeater, perpetual calendar, calendar, etc. Today's protagonist is the calendar.

Pity the three nights of the first month of September, the dew is like a real pearl and the moon is like a bow", the adjustment of the month is very complicated, the size of the month, the flat month, the leap month. So it's not an easy thing to set the date. If there are a lot of differences in the dates, it is a headache to change back to the correct date.

Watches are not divided into mechanical and quartz, and the structural principle is the same in terms of the fast adjustment of the calendar. There are several types of calendar quick adjustment mechanism, but the most way to adjust by pulling out the watch handle rotation is the most, usually the watch handle is set with 3 gears, the watch handle is completely pushed into the normal gear, the watch handle is completely pulled out is the dial pin, and in between the two is the calendar fast adjustment gear. In the calendar quick adjustment mechanism, there is mainly a date dial dial dial wheel, which is a gear with double teeth.

The upper stage has a relatively small number of teeth and a special shape for toggling the date dial. The lower teeth and the pin wheel are meshed, and the rotation of the watch handle drives the lying wheel and the pin wheel, which also makes it rotate. **Inquiry:

Quad oo-8z3-7ioz

Watches with double calendars (with day of the week) can be adjusted differently when the handlebar is turned left or right. In the case of a single-date (no day calendar) watch, the handlebar rotates in one direction to adjust the dial, and in the other direction the calendar dial "swings" to the inside of the movement, at which point its upper teeth and date disc teeth are disengaged.

The calendar quick-adjustment mechanism is prone to malfunction as follows:

You can't fast-adjust the calendar, or when adjusting, it feels like the gears are slipping. This problem is usually related to the gap between the date disc in the cover, or the dial pressing down on the date dial, and then there is the deformation of the clutch lever of the dial wheel and the deformation of the pull block part, resulting in poor meshing of the dial wheel and the date dial wheel. There are two addresses in Hangzhou, one is at 2606 at China Resources Building B, and the other is at 3006 Kunhe Center

The watch does not feel obvious about the gear of the fast-setting calendar, and this reason is related to the rust of the handle and the broken head of the cover spring.

The handle can still quickly adjust the date in normal gear, indicating that there is no clutch between the dial wheel and the date dial, which is related to the deformation of the pull gear and the lying wheel clutch lever or the dial wheel clutch lever. If you want to say that this problem is not very big, it is that the watch is easy to be misoperated, so that the date display changes and makes mistakes.