How to make Lantern Festival lanterns, how to make Lantern Festival lanterns

Lanterns are of great significance and indispensable for the Lantern Festival! To make Lantern Festival lanterns, you need to prepare the following materials: two paper cups, a few red threads, glue or double-sided tape, coloring pens or gouache, scissors, etc.

1. The steps of making Lantern Festival lanterns are as follows:

1.Before you start making, you need to prepare some basic materials, such as bamboo skewers, paste, copy paper, crepe paper, double-sided tape, etc.

<>3.It is then fastened with paper tape.

<>6.Then paste crepe paper or copy paper, so that the basic configuration of the lantern lantern has been revealed.

7.Paint and add a candelabra to the inside, and you're done with your beautiful Lantern Festival lanterns.

Teach you to make a Lantern Festival lantern with paper bark, Peppa Pig version, and have a happy Lantern Festival together!

Cut off the head and tail of the plastic beverage bottle, and then cut the middle part of the bottle body into even strips with a knife, leaving the equal part at both ends and not cutting through. Do this step, press the two ends to the middle, and you can see the prototype of the lantern. Then find two bottle caps that are similar to the bottle body and perforate them in the middle, put them on both ends of the bottle body, thread them with thread or silk or iron wire, and tie the knots at both ends to make a lantern.

If you want to beautify it, when you scratch the bottle, you can carve it out to your liking.

2. You can also find a cable with five or six iron wires in the middle, leave a few centimeters at both ends, remove all the skin in the middle, and then slowly pull the iron wire outward to trim it into a lantern. Detailed].

The steps to make Lantern Festival lanterns are as follows:

1. First take a square of colored paper and fold the center line of the colored paper in half.

2. Align the left and right sides of the colored paper with the edge line, and continue to symmetrical the diagonal of the colored paper.

3. Fold the two adjacent sides in half and fold the other side back at the same time.

4. Three such origami are needed, and they are slowly cut out with scissors along the drawn line.

5. Open these three paper cuts, fold the petals upwards, and glue them together in the order of the size of the colored paper.

The first step is to make a skeleton. The relatively simple shape of a paper lantern is a cube or cylinder, and it is best to use bamboo branches or bamboo bark that can be bent to form a frame, and tie the joints with thin wires. If you can't find it, you can also use slender strips of cardboard and bamboo skewers for barbecue, which will lack firmness and flexibility, but they are also very good decoration for the interior.

The second step is to make the lamp body. Buy a few pieces of white or red ordinary rice paper or sprinkle gold rice paper at the Four Treasures of the Study, cut them to the length and width of the lantern skeleton, and then you can design your own patterns. Calligraphy, painting, and paper-cutting can all be displayed on a small lantern.

After pasting, you can also use narrow strips of imitation silk paper to edge up and down, which looks more elegant, much like an ancient palace lamp. If you are not very good at calligraphy and painting, there is a simple way to refer to it. Use a piece of tissue paper to write the words you want on the notebook, and then go to Wantong Business Union to find business!

Then the thin paper and the crimson rice paper are overlapped, and the handwriting is dug out with a single-edged blade. When the tissue paper is removed, hollowed-out handwriting appears on the red rice paper. The body of the lamp is made of white rice paper, and the red rice paper is pasted inside, and the candlelight or light is reflected from the hollow, and the effect is quite beautiful.

The third step is to make a light source. If you put it indoors, you only need to light a regular candle in a lantern; If you want to carry it out, it's best to make a simple circuit with a light bulb and a battery.

Cut the paper into 20 circles, the same size. Fold an equilateral triangle in the middle of each circle, and present the equilateral triangle where it needs to be the surface, and stick the extra arcs together. If you want a lamp, you need a small lamp like a flashlight, cut out a circle with the same size as the switch, and glue the lamp to the back of the circle, you can stick cardboard to the circle, so that it can be stronger.

Eating the Lantern Festival competition, I'm here.

Balloons are used as props to make lanterns for the Lantern Festival by hand**. The idea is very simple, cut the tissue paper into small pieces, stick it on the balloon to dry, and then remove the balloon and load it with LED lights. Simple Lantern Festival handmade small production.

Blow up the balloon and place it on top, covering it with a layer of plastic wrap. Then apply glue to the plastic wrap and stick the tissue paper torn into small pieces. Cover the entire balloon with a few more layers.

You need to prepare: balloons, tissue paper, white latex, LED lights, brushes, scissors, hemp rope, wire. Start by making a cylindrical base out of cardboard.

Blow up the balloon and place it on top, covering it with a layer of plastic wrap. Then apply glue to the plastic wrap and stick the tissue paper torn into small pieces. Cover the entire balloon with a few more layers.

Cut a piece of hemp rope, paste it near the top, and then paste tissue paper to cover the hemp rope. Place to dry, cut along the top of the twine, and remove the balloon. Install the wire symmetrically on the hemp rope and put the LED light in. The beautiful Lantern Festival lanterns have been made!

1. Prepare twelve small wooden sticks of the same length, assemble them into a basic lantern rack, then wrap the unwanted fine linen around the frame and fix it to the stand.

2. Fold a piece of red paper in half, then draw your favorite pattern on the side of the stamp, such as fish, rabbit, then draw some simple patterns in it and cut it into hollowed-out patterns along the side.

3. Attach the incision to the outside of the lantern and wrap the rope around the opposite sides of the bracket, then you can hang it.

4. In ancient times, its main role was lighting. Paper or silk was used as the outer skin of the lantern. The skeleton is usually made of bamboo or wooden strips, with a candle or light bulb in the middle, which can be used as a lighting tool.

Influenced by Chinese culture, lanterns are also common in temples in many countries in the Chinese region of Asia.

Steps to make Lantern Festival lanterns:

Material tools: red cardboard, gold cardboard, pencil, carving knife, ruler, hot glue gun.

2. Cut along the longitudinal solid line and fold the top and bottom edges.

3. In addition, cut out slender strips from the golden cardboard.

4. Paste it on the red cardboard.

5. Take the golden cardboard, fold the right edge, and use it for glue and glue.

6. Roll up the golden cardboard and glue it to get a cylindrical shape.

7. Paste the top and bottom edges of the red cardboard to the top and bottom edges of the cylinder respectively, so that the middle arches.

8. Finally, make two holes at the top and tie the lanyard, and the lantern is ready.

How to make lanterns for the Lantern Festival 1:

1. Prepare 12 small wooden sticks of the same length, assemble them into a basic lantern shelf, if there is no connecting plug in the picture, you can use a strong rope to connect the wooden sticks, and then wrap the thin linen cloth that you don't want at home around the outside of the frame, paste and fix it on the bracket.

2. Fold a piece of red colored paper in half, then stick to the side of the seal to draw your favorite pattern, such as fish, rabbit, heart, etc., and then draw some simple patterns on the inside and cut it along the edge.

3. Stick the cut simply on the outside of the lantern, and then wrap the rope around the opposite side of the bracket, and then you can hang it.

How to make Lantern Festival lanterns 2:

Tools Raw materials: various types (different thicknesses) of iron wire, pliers, thin red cloth or hard red paper, glue, scissors, needle and thread, red rope, all kinds of festive small ornaments, etc.

1. First of all, we must do a good job of the base frame, you can use pliers to fold the small and medium-sized iron wire into the shape of octagonal (Bafang Laicai), tie the diagonal position and the side connection, fix it, so that it will be stronger, and then make two up and down opposites, connect it with medium-sized wire, and a frame is basically completed.

Note: If you want to place a candle, you can add an octagonal piece of cardboard or wood to the bottom and drill a hole in the middle with an iron nail.

2. Then it is to cut, paste, and paste the red coat, draw it with thin red cloth or red paper according to the size, cut it into an octagonal shape, and glue or sew the paper-cut patterns on it.

Note: To place the candle, you need to dig eight small holes in the body of the lamp to let in the light.