The steps of automobile crystal plating, how to operate automobile crystal plating

1.First, park the car in a sheltered environment, wet the paint surface of the vehicle with water, and use wool gloves to dip the foam on the foam to wash off the dirt on the paint surface.

2.Use volcanic mud with QD liquid to further clean the surface of the car paint, and the volcanic mud (magic mud) can absorb the fine dust on the surface of the car paint and make the car paint smooth. After the volcanic mud is done, rinse the car thoroughly.

3.Degreasing, dipping a non-woven fabric with a degreasing agent, wiping the car paint, and degreasing.

4.Crystal plating, after the above work is done, you can start crystal plating. There are no crystal plating products, which are equipped with a special sponge for crystal plating and a small one.

Hello, the steps of automotive crystal plating are as follows.

Wash the car first, and then do protection, observe whether the paint surface is completely safe, if it is not intact, it needs to be polished, if it is intact, the car can be directly plated.

The steps of car plating are mainly the first step, and then start after polishing and polishing after washing the car, one of our steps, and then start our one crystal plating step.

How many steps does it take to make the automotive paint crystal plating formal, which will be revealed for you today.

Automotive Crystal Plating Process:

1. Do a good job of protection first, first of all, cover the front windshield, license plate identification and side seams, mainly to prevent follow-up treatment problems caused by product splashing.

2. Remember to use polishing agent and ultra-fine dewhirling agent to remove fine scratches on the paint surface, and restore the paint surface at the same time.

3. Wipe it clean with a polishing cloth when finished.

4. Degreasing the surface of the car paint.

5. After completion, use the special rubbing for crystal plating to slightly and evenly apply it to the surface of the car paint.

6. Finally, use professional crystal plating to wipe the cotton cloth to polish the surface of the car paint.

Automobile crystal plating needs to determine the products used and the automotive crystal plating process according to the degree of use of the car, and the car is generally divided into new cars, new cars and old cars. The new car crystal plating only needs to do mirror reduction, and then degreasing the car, and then directly plating the car. For new cars and old cars, the surface of the paint is polished first, and then the paint is mirrored, then the car is degreased, and finally the car is crystallined.

It should be noted that the car should not be washed within hours after crystal plating. And do not touch the paint surface after the crystal plating, it is necessary to ensure the final shaping effect of the crystal plating.

Crystal plating curing process: After about 3 months of paint plating construction, crystal plating curing can be carried out.

1. Check the condition of the car.

After the order is accepted, the vehicle is thoroughly inspected for scratches and paint stripping.

2. Clean the car body.

Wash your car in front-to-back, top-to-bottom order with a neutral shampoo and carefully wipe the body with a soft towel.

3. Clay treatment.

After rubbing the clay repeatedly, place it in the palm of your hand and move it back and forth with water in a horizontal direction in a range of 50cm to 50cm.

4. Adhesive edge protection.

Use 12mm, 18mm, and 24mm adhesive tape to protect different parts of the car body.

5. Polishing.

According to the actual situation of the paint surface, select the appropriate abrasive for polishing and grinding.

6. Clean the paint dust.

Rinse the whole car carefully with clean water, and then use an absorbent towel with an efficient dry cleaning gun to dry the paint.

7. Degreasing and cleaning.

Degreasing the paint surface is carried out with special degreasing water to prepare the paint surface for curing.

8. Apply paint surface curing agent.

Carefully curing the paint surface with a paint curing agent, referring to the crystal plating standard.

9. Quality inspection of the whole vehicle.

Clean and care for the condition of the paintwork, seams, doors, engine compartment, glass and tires.

10. Delivery.

After confirming that the construction of the whole car is complete, hand over the car to the owner.

1. First do a good job of protecting the car, covering the front windshield, license plate logo and side seams, etc., to prevent the follow-up problems caused by product splashing.

2. Wipe it clean with a polishing cloth after the masking is completed.

3. Degreasing the surface of the car paint.

4. Use ultra-fine dewirling agent and polishing agent to remove the fine scratches of the paint surface, and restore the paint surface at the same time.

5. Finally, use professional crystal plating to wipe the cotton cloth to polish the surface of the car paint6. After completion, gently and evenly apply it to the surface of the car paint within the scope of a small piece of special crystal platingAdvantages: It can form a layer of solid crystals on the surface of the car paint, which can play a real role in protecting the paint surface.

Cons: High. The construction is complex and demanding, and must be carried out by professionally trained crystal plating technicians.

Crystal plating is a car care method that has attracted a lot of attention in recent years. A variety of powerful protective crystals and ultraviolet filter layers are formed on the surface of automobile paint, which can improve the brightness and hardness of the paint mirror, prevent scratches, and prevent damage to the surface of the car by harmful substances such as ultraviolet rays, acid rain, salt, asphalt, flying paint, insect spots, yellow sand and bird droppings. It is like putting on a high-tech "protective coat" for the car paint, which completely isolates any erosion of dust, oil, mold, water molecules and other particles on the car paint itself, and has the effect of anti-ultraviolet, anti-oxidation, anti-friction, non-fading, and increasing the hardness of the paint surface, so that the paint surface can maintain its original bright and gorgeous color for a long time.

Method steps.

Paint clean. Cars often have oil, asphalt, bird droppings, dust, acidic rainwater ...... on the paint surface of the car that has been usedThe combination of long-term adhesion to the paint, combined with sun exposure and high temperatures, can make these mixtures difficult to wash off with water. Therefore, if you want to completely remove the stolen goods adhered to the car paint, you will generally use the center car wash liquid to wash the car, and then carefully clean the body with clay to ensure that the car paint is clean.

Protective and paint polishing restoration. Automobile crystal plating is suitable for new cars and old cars, because the paint polishing reduction can throw away the oxide layer on the car paint, and restore the paint to the color and brightness of the factory, this operation is relatively high for the technician, the technician should master the characteristics of different materials of the car paint, according to the degree of oxidation to choose different polishing agents and polishing discs to polish the car paint, for the old car, this step is the most time-consuming.

Degreasing and crystallizing construction, after polishing and reducing the car paint bright as new, the crystalline plating solution is evenly applied to the car paint during the crystal-plating construction, and then the formation of the crystal-plating layer is accelerated by wiping, the construction of the whole car to apply the crystal-plating solution should be carried out twice, after the coating can be obvious to see the crystal effect, the best effect is achieved after the construction twice, and the advantages of increasing the brightness of the car paint are fully displayed.

Allow to dry naturally. After the above process is completed, you need to dry it for another hour, and you can pick up the car.

Precautions. After crystal plating, you can't get wet in the rain for three days, and you can't wash the car for seven days.

It takes about half a year to visit the store for maintenance.

To do a good job of "crystal plating" requires the following steps: car washing, polishing, degreasing, and crystal plating. Polishing is done to remove scratches and oxide layers; Degreasing is to remove the residual wax grease left on the surface of the car during polishing; If the car surface is not degreased, there will be wax grease residue on the surface of the car paint, and the direct crystal plating will cause the crystal plating layer to fall off with the cleaning of the car, so degreasing is a necessary step for crystal plating.

Many car beauty shop masters deliberately reduce the steps in order to save time and effort. In fact, it looked good at the time, and after a few car washes, it will show its feet! Imagine plating crystals on a layer of slippery grease, how long can the best "crystal plating products" be kept on it?

Degreasing is to remove the residual wax and grease on the car paint after polishing, just like "removing makeup" for the car and turning it into "no makeup", and then apply a layer of transparent stepless crystal film to isolate the car paint from the air and carefully care for the car paint underneath.

Crystal plating can increase the hardness of the paint surface, the protection of the car paint for a long time, is the best choice for many car owners to do beauty projects, hand in hand to teach you the standard of automotive crystal plating construction.

1. Park the car in a sheltered environment, wet the paint surface of the vehicle with water, and wash off the dirt on the paint surface with wool gloves dipped in foam after foaming. 2. Use volcanic mud with QD liquid to further clean the surface of the car paint. 3. Crystal plating.

Crystallization method steps: 1. Park the car in a sheltered environment, wet the paint surface of the vehicle with water, and wash off the dirt of the paint surface with wool gloves dipped in foam after foaming. 2. Use volcanic mud with QD liquid to further clean the surface of the car paint. 3. Crystal plating.

Crystallization method steps: 1. Park the car in a sheltered environment, wet the paint surface of the vehicle with water, and wash off the dirt of the paint surface with wool gloves dipped in foam after foaming.

2. Use volcanic mud with QD liquid to further clean the surface of the car paint, which can absorb the fine dust on the surface of the car paint and make the car paint smooth. After the volcanic mud is done, rinse and dry the car thoroughly. If there are conditions, the whole car should be polished and plated in crystals, and the effect will be better.

3. Crystal plating, after the above work is done, you can start crystal plating. Each crystal plating product is equipped with a special sponge for crystal plating and a small cloth, wrap the sponge with a cloth, and then drop a few drops of crystal plating solution on the cloth that wraps the sponge, and evenly apply it in a straight line or tic-tac-toe on the car paint, and do not miss the rub. (Note that when plating, wipe the plating solution one by one, and wipe off the excess crystal plating solution with a towel after three to five minutes.)

Operate in turn until the whole car is finished) After the crystal plating, do not touch the water within two hours to avoid plating the crystal plating solution to the car glass. The principle of crystal plating is to form a thin crystal film on the surface of the car paint, reduce the damage of harmful substances to the car paint, and make the car paint last as bright as new and can maintain the effect for more than one year.

Photo by Q&A) Xingrui Ideal One Model Y Model X Hiphi X Leap T03 @2019

Automotive Crystal Plating Process:

1. Paint cleaning: After the use of car paint, it is often sticky to oil, asphalt, bird droppings, dust, and acidic rainwater on the car paint for a long time, coupled with the combined effect of sun exposure and high temperature, which will make it difficult for these mixtures to be washed clean with water. Therefore, if you want to completely remove the stolen goods adhered to the car paint, you will generally use the center car wash liquid to wash the car, and then carefully clean the body with clay to ensure that the car paint is clean.

2. Protection and paint polishing reduction: automotive crystal plating is suitable for new cars and old cars, because the paint polishing reduction can throw away the oxide layer on the car paint, and restore the car paint to the color and brightness of the factory.

3. Degreasing and crystal plating construction: the polishing and reduction of the car paint is as bright as new, the crystal plating solution is evenly applied to the car paint during the crystal plating construction, and then the formation of the crystal plating layer is accelerated by wiping, the construction of the whole car coating crystal plating solution should be carried out twice, after the coating can be obvious to see the crystal effect, the best effect is achieved after the construction twice, and the advantages of increasing the brightness of the car paint are fully displayed;

4. Natural drying: After the process is completed, it needs to be dried for another hour, and it is OK.

Millions of car purchase subsidies.

The plating process of the car is as follows: 1. Cover the front windshield, license plate logo and side seams; 2. Use polishing agent and ultra-fine dewhirling agent to remove fine scratches on the paint surface; 3. Degreasing the surface of the car paint. 4. Use professional crystal plating to wipe the cotton cloth to polish the surface of the car paint. The functions of automotive crystal plating are:

1. The surface of the car is isolated from the outside world, which is not easy to oxidize, which effectively prevents the corrosion of the paint surface by acid rain and increases the service life of the car paint; 2. All kinds of dust, mud and foreign objects on the surface of the car can be easily cleaned up; 3. It can reduce the damage of external force to the surface of the car; 4. High value retention rate.

Automotive Crystal Plating Process:

1. Vehicle condition inspection

Mainly check whether there is heavy painting, whether there are irreparable scratches, whether it has been polished before, and whether the car paint is abnormal.

2. Body washing

Use high-pressure water to rinse off the dust, sand, dirt, etc. attached to the car body; Then spray the special car wash foam on the surface of the car body, and then use a clean car wash soft sponge to start from the upper part of the car body and wash it downward; Finally, use a high-pressure water stream to rinse the foam from the top of the car body until it is clean.

3. Paint stain removal

Remove iron powder, stubborn stains such as insect carcasses, tree sap, bird droppings, asphalt, and light paint and asphalt from the surface of the car body. Remove stubborn stains such as rust from the wheels.

4. Masking treatment

Treatment of resin, rubber, electroplating parts; protrusions; The gap part of the license plate, the car logo, and the part that affects the appearance after the abrasive is adhered to.

5. Polishing and grinding

Judge the condition of the paint under a special light. Depending on the scratches and deterioration of the paint, the paint is classified from severe to mild. Depending on the hardness of the paint, different options are available. Do not use abrasives containing silicone or wax to avoid affecting the coating effect.

6. Clean and degreas

Use Zhende's special degreaser to remove the oil, dust, and abrasive residues remaining on the surface and crevices of the paint during grinding, and pay attention to gentle movements to avoid scratching the treated paint surface.

Automotive crystal plating process and precautions.

7. Coating agent application

Use a special crystal-plating sponge to coat the Zhende nano-inorganic crystal plating on the sponge until it is wet, and then evenly apply the paint surface.

8. Wipe with coating agent

After applying the coating agent, after an appropriate period of time to make it react, wipe the paint surface with a special ultra-fine car towel until there is no residue of the coating agent and the paint surface is bright.

9. Check and deliver the car

Use a light to check if there are any wiping marks or incomplete and unclean areas, and if you find any residue, wipe them again immediately.

Precautions for automotive crystal plating

1. Do not touch the paint surface as much as possible after crystal plating to avoid affecting the final crystal plating effect.

2. Do not wash the vehicle within one week after crystal plating.

3. It takes 24 hours for the crystal plating agent to be completely combined with the paint direction to form the final paint crystal protective layer.

4. After 4 to 6 months of crystal plating, you can go to the beauty shop for paint mirror reduction and repair, so that the crystal plating effect of the paint surface is better and the retention time is longer.