How to set the router to allocate broadband to 50

Is your wireless encrypted?

It's very likely that someone will rub the net.

If there is a bandwidth control option, look at the instructions on the page for the settings inside.

Low-end (home) routers don't have bandwidth allocation options, and wireless itself may be a beat slower than wired, so it's not a big problem to play this game on a laptop, the key is the network!

Let's see if the router has that feature.

If so, choose to set the IP bandwidth, write your address, and then select the minimum bandwidth to be guaranteed.

If you want to be stable, it's best to use wired, wired, and invincible.

If you want to set up your router with that function or your own next software, if there are many of you,

You can't play games, watch movies, play games, play games, there's no problem at all, it's recommended not to play any software, it's not good for everyone.

To buy a line 2 yuan a meter is not expensive.

There is a gateway and administrator password behind the manual or router After entering, set up encryption, it is best not to have too many thieves on the side of the wireless router. Even if you add encryption, there are cracked software that can be cracked, and it is recommended to change to wired.

The first is that your router should have a bandwidth allocation function, and if you don't have it, you can only use software.

Such as P2P

1.First of all, if there is a wireless router, then first turn on the power supply, and then plug in the network cable, plug in the WAN port (usually the blue port), and then connect with the computer network cable to plug in any LAN port, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare an additional modem, commonly known as "cat").

2.Then enter, enter the corresponding account and password, generally the new ones are admin

3.After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

4.Enter the setup wizard interface.

5.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

Static IP is generally a private line or something'It may also be the cell bandwidth, etc., the upper layer does not have a DHCP server, or wants to fix the IP. I chose PPPoE because I dialed.

6.If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

7.Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8.The next step is to set it up successfully.

9.Click Done, and the router will automatically restart, so be patient. The interface that appears after success.

The new router from the original router is different from the first router, and the connection and configuration methods are as follows:

1. In connection mode, lead a network cable from either LAN 1234 port of router A (main router) and plug it into the WAN port of router B.

2. Enter the web management interface of router A, open the LAN port settings - network parameters, and check the IP of the LAN port, assuming that it is.

3. Modify the IP address of the B LAN port of the router.

If the IP address of the LAN port of Router B is the same as that of Router A, the IP address of the LAN port must be changed. For example, change to.

4. To modify the WAN port settings of Router B, click WAN port settings, set the WAN port connection type of Router B to Dynamic IP and save it.

In short, the main router remains the same, and the LAN port of each new router is changed to a different one, and other settings are the same.

5. Set the wireless password.

Try to make the password as complex as possible, preferably a mix of numbers, English, and symbols.

2. Enter the correct username and password to enter the router management background.

3. We need to check the existing IP and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

Generally, the cheapest router does not have a bandwidth limiting function, it is recommended to buy a slightly better router, and many of the 200 or so have this function. In terms of program control, it is generally ARP spoofing, and it is ineffective if someone else has a firewall or 360 security guard.

That's because your router doesn't have a bandwidth control function, and now routers generally have a bandwidth control function, set the bandwidth down, and it's OK!