How to set up a mobile fiber broadband router

Me too, I tried a few times and finally succeeded, so I'll tell you about it below!

First, unplug the router cable and use the optical modem to access the Internet, and turn on the online neighbor property and local connection property protocol in turn

Turn off the power of the router first, pay attention to the power of the router must be turned off, otherwise it will fail, and then connect the optical modem to the router (the power of the optical modem cannot be turned off), and then plug in the power of the router and enter the network neighbor Attribute Local connection attribute Protocol attribute Automatically get the IP address OK.

Finally, open the router settings, enter your broadband and password, OK, don't understand, ask me again.

Second, only connect one through the route, if it can be successful, the next step; If that doesn't work, you can switch the route and proceed to the second step. If it doesn't work, it means that there are restrictions on movement.

Third, connect the route to three computers.

Another problem may be your routing settings, you send me a message, let's communicate directly, there are many possibilities, and you are not detailed enough.

You'd better ask the mobile salesman and who of you are the professionals, and you'd better ask.

Operation method: Take the TPLlink router as an example, connect the broadband network cable to the WAN port of the router, connect the power supply, open the wifi setting page of the mobile phone, connect the router wifi, the mobile phone will automatically pop up the settings page of the router, set the administrator password, select broadband dial-up Internet access, enter the broadband account and password to use.

Precautions for router use: 1. The router can be MAC address filtering, open the router settings page, click "Network Security" - MAC Address Filtering", and turn on the "MAC Filtering Status".

2. It is best to change the password of the router regularly to prevent others from rubbing the network.

3. The network speed of the router is slow, it may be that there are obstacles around the router, so it is recommended to use the router in an open place.

4. The router generally has a bridging function, which can expand the WiFi signal coverage.

Data development: Routers are the main node devices of the Internet. The state leads the router to determine the data through the route.

Some routers only support a single protocol, but most routers can support the transmission of multiple protocols, that is, multi-protocol routers. Since each protocol has its own rules, the algorithm of completing multiple protocols in one router is bound to reduce the performance of the router.

Shifting the bare is now a lot of people handle the Internet broadband, and China Telecom Unicom is not the same, many people don't know much about how to set up the mobile broadband router, the following is the method I sorted out the mobile broadband router settings, for your reference.

Connect the incoming cable to the wireless router to the WAN port.

The self-rolling is to send the network cable prepared by yourself (one end to the router and the other end to the computer or laptop) <>

<> set up the computer, this product is set up separately for different operating systems.

<> set up the router (different routers are similar), change the username and password, and save it.

When it comes to mobile broadband routers, I believe that friends who often surf the Internet know that it is an important network device. However, using a router requires setup to be used, and many people don't know much about it. So how to set up a mobile broadband router?

When setting up the router, you can refer to the manual, and enter the gateway of the router in the computer browser first (there is a gateway content displayed on the back of the router of the router); Then enter the settings interface, click on the setup wizard, and select ADSL to dial up the Internet; Finally, fill in the login name and password and save it to complete the setting.

What are the daily maintenance tips for routers:

1. First of all, when the router is running, it will emit a certain amount of heat, if there is too much dust on the upper area, it will affect its heat dissipation performance, so it is necessary to wipe the dust on the surface with a dry rag in time, and the socket can be treated with a cotton swab dipped in alcohol. It is recommended to seal the socket with a band-aid to prevent dust from entering and exiting.

2. Secondly, when the router is in use, too many sundries should not be piled up nearby, nor should it be too close to wireless equipment, such as induction cookers, etc., otherwise it will not only affect the heat dissipation, but also cause the signal to be blocked. It is suitable for placing in an open place and has a strong signal. In addition, the router wifi password should not be set too simply, and it is best not to use the default password to avoid being invaded.

3. Finally, when the router is in use, it is recommended to turn off the power after a long time of use and let the router take a break, because long-term operation will affect the use of the router. And now the routers are all smart, you can set to automatically restart every day, and the router should be updated regularly to make the router more stable.

Summary: The above is the relevant content of how to set up the mobile broadband router and the daily maintenance skills of the router, hoping to help friends in need.