-
Anonymous users2024-02-05From the LAN port of the main router, a network cable comes out and connects to the LAN port of the wireless router, log in to the wireless router, turn off the DHCP service of the wireless router, and set the IP address of the LAN of the wireless router, which should be different from the LAN IP of the main router.
-
Anonymous users2024-02-04It's very simple, first connect a network to the WAN (must be a WAN interface) interface of the wireless router from the TP route, because you have been connected to the TP route in front of the route (it should be automatically assigned IP), you only need to temporarily connect a computer network cable to the new wireless router (your wireless router will not have a wired network interface??? If there is no network interface, you can only find a computer with a wireless network card to configure wireless routing), and then enter not necessarily this, but the management address of the wireless route should be printed on the bottom surface of the router, find it yourself), and then enter the user name and password are: admin, and then set the WAN connection mode to dynamic IP Internet access, and keep clicking Next until it is completed.
Plug the computer network back into the original interface, and try again to see if the mobile phone can access the Internet? If that doesn't work, restart the wireless router again. That's it.
If you can't ask again, I'll be happy to help you solve this problem.
-
Anonymous users2024-02-03After reading your description, it should be your computer's wireless network card problem.
1. Are you sure that the password is entered correctly?
2. Are you the same as Lingzun's computer system (Win7 and XP)? Please rule out the configuration problem of the wireless adapter first, the frequency band of your wireless router should be the default 6, if not, the wireless network card may have to be set manually.
3. In addition, you can delete other hotspots in the wireless network card AP management of the computer.
4. Reinstall the computer wireless network card driver.
-
Anonymous users2024-02-02I also encountered this problem a few days ago.,I started to use a notebook.,The password is set and can't be connected.。 Later, I used the router password set by the desktop.,It's still like that.,In a fit of anger.,The router and the book were opened there overnight.,The next day was normal.,Wondering.。
If the computer and router are normal, I feel that it is a problem with the key matching now...
-
Anonymous users2024-02-01First of all, confirm that the system is win7,Or is it win7+xp,If there is win7,Pay attention to the encryption mode when connecting the route in win7 systemWEP,This is multiplayer mode,If you use win7 default,Then it's WPA2,It's personal mode and other people can connect to the route but can't access the Internet。
-
Anonymous users2024-01-311.Restore the router factory value.
2.When encrypting a wireless router. The encryption algorithm is chosen as the default. Then set a password. Remember to save.
3.You can use this book to try to connect.
-
Anonymous users2024-01-30You try not to cancel the broadcast!
As the main router that uses the account virtual dial-up to access the Internet, WDS cannot be enabled, and the secondary router enables WDS to tick, and the bridge password method and password must be the same as the wireless security password method! That is to say, during the bridging process, the router needs to enter the password in 3 places, namely: 1, the wireless security settings of the main router, 2, the bridge security settings of the secondary router, and the wireless security settings of the 3rd secondary router. >>>More
Look at the IP behind the router in general.
The password is also behind it, and it's usually admin >>>More
You have restored the factory settings of the router, of course, you can't access the Internet, because the information in the router is also erased when you restore it. If you use win's built-in dial-up or Internet starry sky to surf the Internet, you can't connect to the router, directly to the cat. >>>More
The first thing that can tell you is that there are no problems with your network and routing. The situation you mentioned is that the firewall trusts the software or accesses ** and automatically prohibits access because it does not trust the plug-in; The second is because you are connected to multiple computers and other computers are opening BT and other software** things or the network itself, resulting in the network speed is too slow (because of the advantage of bandwidth and response speed, it will be faster than others**, QQ because the data exchange with the host is different from IE, so it is not easy to find), if this is the case, you can enter the ping command in the command box to ping the local telecom host to judge, the more the value in the ms column in the beating data** the faster the clear network speed, The command format is ping the telecom host IP (for example, -l 1024 -t for Jiangxi; The third is that the data flow of the ** you are accessing itself is abnormal, resulting in a short-term failure or slow access.
It's all the same, you take the optical fiber cat to borrow the WAN excuse to follow the line to the router on the computer to set up, and follow the wizard to enter the dial-up account password. If you have a question, thank you.