What are the methods of anti magnetic in Omega watches

1) Do not open the back cover at will, so as not to invade the watch machine with dust, fibers, water vapor, etc., and affect the normal running time of the watch.

2) It must be clocked every day, and the timed winding can keep the watch accurate.

3) Pull out the handle to dial the needle, reverse the dial can be, after the dial needle must be pushed to the upper position, otherwise it will cause the watch machine to stop.

4) The watch case should be wiped frequently to keep it clean. If the watch is not in use, it should be placed in a dry, mothball-free place, and it should be wound every once in a while to prevent the lubricating oil from solidifying and affecting the time.

5) In the case of strenuous exercise or large vibration, it is advisable to take off the watch to avoid damaging the mechanism.

6) The waterproof watch can prevent the invasion of water vapor in the air under normal circumstances, and it is not absolutely impossible to enter the water.

7) Although the watch has a certain anti-magnetic performance, it is still necessary to avoid contact with a strong magnetic field to prevent the magnetization of parts and cause the watch to change its time.

8) Do not make the watch contact with corrosive liquids and gases such as acids, alkalis, salts, etc., long-term sweat erosion will cause rust spots on the case, when using the watch in summer, it is best to use a padding pad to separate it from the arm.

9) Watches have a certain speed and slow error, as long as the error does not exceed the standard, do not often dial the fast and slow hand.

The above is the introduction of the relevant information about the official after-sales maintenance of Omega watches, and the detailed after-sales or watch repair center details can be logged in to the watch repair technician platform, which can provide users with the most convenient consulting services.

Daily maintenance of the watch:

1. Do not put the watch on the stereo or TV to prevent magnetization.

2. Do not put the watch in the wardrobe with mothballs to prevent the watch oil from deteriorating.

3. Do not touch the watch with corrosive substances, especially acidic substances, which will corrode the case.

4. The watch should be maintained every 1 to 4 years, replacing waterproof components, testing the function of the movement and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

In a general sense, anti-magnetic watches refer to those watches that can prevent magnetic field interference. Of course, it is not absolute, and it does not mean that all anti-magnetic meters can achieve 100% anti-magnetic effect.

At present, there are generally two production principles of anti-magnetic watches, one of which is that the hairspring used in the movement of the watch is made of new alloy materials, so that the possibility of the hairspring being magnetized is greatly reduced, and the hairspring of the general anti-magnetic watch is made of nickel-based alloy, which is not easy to be magnetized. However, it is important to note that even if an anti-magnetic watch, its other parts are still susceptible to magnetism. Second, add an alloy compartment to the case of the anti-magnetic watch, especially the back cover, to reduce the possibility of the hairspring being magnetized, but this will affect the aesthetics.

Watches are metal, and metal is easy to magnetize. If the watch is magnetic, the watch will go faster, for example, 1-2 hours a day, because the hairspring sticks together, reducing the swing frequency. Therefore, wearing mechanical watches needs to be kept away from magnetic fields, such as TVs, mobile phones, stereos, microwave ovens, hair dryers, etc.; Magnetization of watches is very common, and the solution is not complicated, you only need to take the watch to a professional maintenance point and use the machine to demagnetize.

Most of the parts of ordinary mechanical watches are made of steel, and the accuracy decreases or stops due to magnetic force after magnetization, and anti-magnetic watches are made of non-magnetic metal materials (such as stainless steel), which are not afraid of magnetization.

It is the principle of magnetic shielding, and a soft iron ring is added to the key parts.

Principle of electrostatic shielding. The watch case has a layer of metal.

Introduction to shockproof and anti-magnetic properties.

Generally, Omega watches have a certain shockproof function, and the internal shockproof function of Omega watches can play a role in the impact of external forces. If the quartz watch battery is disconnected from the positive and negative poles, or the balance wheel disc of the mechanical watch is misaligned, causing the watch to stop, please do not think that the watch is broken, in fact, just go to an authorized repair station to reinstall it in place.

The so-called anti-magnetic OMEGA watch is not all parts of the watch are anti-magnetic, but only the main parts, such as the balance, hairspring, spring and other parts made of anti-magnetic materials.

Such as televisions, stereos, freezers, mobile phones, induction cookers, electric mahjong tables, magnetic bags, etc., although some OMEGA watches have shock-proof and anti-magnetic functions, it can only be prevented, so avoid violent collisions or place OMEGA watches next to electrical appliances or magnetic objects that generate magnetic fields. The above reasons will cause the watch to stop or be inaccurate.

Generally, Omega watches have a certain shockproof function, and the internal shockproof function of Omega watches can play a role in the impact of external forces. If the quartz watch battery is disconnected from the positive and negative poles, or the balance wheel disc of the mechanical watch is misaligned, causing the watch to stop, please do not think that the watch is broken, in fact, just go to an authorized repair station to reinstall it in place.