What s the case with Omega watches that have been going slow lately? Is there something wrong with t

There are three reasons for inaccurate time:

First, the power is insufficient.

The power required by the watch is not the same, like the Sturing automatic mechanical watch, it relies on the shaking of daily wear to store power, if you do not wear it for a long time, there is no power, then the watch will definitely stop or slow down. The manual one needs to be wounded up and down from time to time, and some rely on electronics to maintain rotation, so if the watch is inaccurate recently, it is likely that the electronics are out of power and need to be replaced.

2. External interference.

This is whether you pay attention to it when you wear it daily, for example, watches are relatively squeamish, waterproof, anti-magnetic, and shock-proof, if you don't do a good job, it is normal for the watch to be inaccurate. If you wear a watch that cannot be worn for strenuous exercise, and you wear it to play golf or badminton, the strong vibration may cause damage to the parts inside the watch, and the watch will not be accurate.

In addition, it is a cliché that watches are afraid of magnetism, if your job is to engage in some research things and need to be in frequent contact with large electronic devices, then try not to wear a watch, because the magnetic field existing around it will disturb the normal walking of the watch. Some people say that the watch is bought to wear, and the baby is not good every day, so why buy it? That's true, but you should also be careful when wearing it.

3. Proper maintenance.

The watch is more precise, there are more small parts, and the mutual fit between the parts can operate normally, so the haul is indispensable for friction, so the watch is oiled, and it will inevitably dry up after a long time, plus there may be some impurities into the watch, so it will cause the watch to go inaccurate, at this time you have to go to maintain it, clean up the watch.

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

If you find that your watch is going faster or slower, you can find a compass to diagnose whether the watch is magnetized. Place the compass flat on the table, hold the watch at close range and quickly shake it back and forth above the compass, and try the watch in a few directions a few more times, as long as the pointer moves, especially if the deflection is very strong, you can judge that the watch is magnetized. The watch is magnetized and it is best to take it to this repair center for demagnetization.

Usually take care of the watch, do not let the watch come into contact with items with strong magnetic fields, and it is best to keep a distance of more than one meter. Do not leave your watch next to TV, computer, radio, mobile phone, mahjong table, refrigerator, washing machine, speaker, car door, or leather bag magnetic buckle.

Another reason is that summer is coming, and the hot weather will go faster than the cold weather. Yes, there are two laws of physics here. One is the thermal expansion and contraction, the weather is hot, the hairspring will be a little elongated, this everyone wants to get, therefore, the lengthened hairspring, the swing will also increase, and the watch will slow down; On the contrary, when the weather is cold, the watch will go faster.

Common reasons for watch time error and watch time inaccuracy:

1. Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is very small, the power reserve may be insufficient, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2. Hit or impacted: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

3. Need for maintenance: The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained and sent to the designated maintenance point for maintenance services.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

Summary. Hello dear, most people know that there is a device designed in the clock that can adjust the speed of the time, which is called the regulator by the watch family, and the fast and slow hand is called the fast and slow hand in the watch industry. In fact, the fast and slow hand is a clock mechanism designed for professional operation and convenience during manufacturing and maintenance, not for users.

There are always two sides to everything, and while it brings convenience, it must also have another problem, that is, the problem of "isochronism", which is inevitable even for the best fine-tuning mechanism. The change in the daily difference caused by the change of the swing of the watch is usually called the isochronous error, or isochronal difference for short. Equal time difference is a technical parameter that occupies a large proportion when inspecting and evaluating the quality of timekeeping of clocks.

What to do if your Omega watch goes slow, why your Omega watch goes slow.

Hello dear, most people know that there is a device designed in the clock that can adjust the speed of the time, which is called the regulator by the watch family, and the fast and slow hand is called the fast and slow hand in the watch industry. In fact, the fast and slow hand is a clock mechanism designed for professional operation and convenience during manufacturing and maintenance, not for users. There are always two sides to everything, and while it brings convenience, it must also have another problem, that is, the problem of "isochronism", which is inevitable even for the best fine-tuning mechanism.

The change in the daily difference caused by the change of the swing of the watch is usually called the isochronous error, or isochronal difference for short. Equal time difference is a technical parameter that occupies a large proportion when inspecting and evaluating the quality of timekeeping of clocks.

Didn't understand your explanation.

Dear, the reasons for the slowdown of the Omega quartz watch: 1. The battery is dead and needs to be replaced with a new battery; 2. The circuit board needs to be replaced if the circuit board is faulty; 3. The coil is broken, which can be detected by the multimeter, and generally needs to be replaced; 4. If the watch is magnetized, you only need to go to the repair shop to demagnetize; 5. If the Omega watch has not been maintained for a long time, there is too much dirt in it, the gear is stuck or the battery is in poor contact, which will cause the quartz watch to not go, and the watch needs to be cleaned, removed from foreign objects and refueled.

Do I have to get an Omega professional watch repair place?

Mine is a mechanical watch.

Dear, yes.

The 4 main reasons why the watch slows down are as follows:

1. The watch may be magnetized, causing the watch to slow down;

2. The watch may have insufficient moving beam energy, resulting in the watch slowing down;

3. The watch is used for too long and has not been maintained, resulting in the accumulation of sludge, resulting in the watch slowing down;

4. The quality problems of the hand balance hole transport table, such as: automatic winding failure, pendulum failure, etc., can cause inaccurate time.