Why does a web page on the desktop appear denied access at one point?

Plan 1 [New P].

Note [Original]:

1 In safe mode, the effect is even better!

2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

3.It is not antivirus, and the following methods can be used directly. If it doesn't work, use a high-quality antivirus (e.g. Kaspersky) in safe mode to kill it, and it's best to use 360 Security Guard as well.

Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. ）

You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, and select "Home Repair", "System Repair" and "IE Repair" as a tick (you can also select all.) At least select "System Repair"), and then click "One-click Repair".

Too lazy to install it, just use the 360 first aid kit) .

Then use the 360 first aid kit. [Follow the steps: "Start First Aid" first; After scanning, if a Trojan horse appears, click "Isolation"; Then click "Repair" (you can select all of them to Fix Now".

Next, click on "Recover Lost DLL Files", add the missing DLL files that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not. When you're done, you should restart.

Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

You can also consider using the Kingsoft First Aid Kit [After point scanning, if there are items that can be repaired, after selecting all, point repair can be done. 】

Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

2.When the effect is not good, look at the three points in "Attention". 3.

After that, if the effect is not good, you can also consider system restoration (choose a restore point).

Hello dear, the denial of access to the web page may be caused by the following reasons:1Access Restrictions:

Some** may have security settings such as hotlink protection or malicious attack protection, and access will be denied if your browser or computer security settings don't meet the requirements. 3.Caching issues:

Sometimes, an unstable or slow internet connection can also cause web pages to be inaccessible.

When the disk capacity is all already capacitated, it can not be expanded, because there is no extra space to propose, the denial of access you said cannot be used under the [win] operating system, you need to exit the [win] system to continue to expand, the solution is as follows.

1. In [PE] mode, open [DiskGenius] [Partition] [Expand Partition Size] (which means to expand partition).

Select C disk] [Start] (starting directly will merge all the excess space in C disk, you can choose [Adjusted Capacity] to start again, and there will be remaining space after the end depends on your adjusted capacity).

Click Finish to restart the computer to complete the expansion capacity, if the expansion fails you can reply to me, I still have a way to solve it.

Hello, start menu-run-enter msconfig and press enter in the boot bar and put **Just remove the tick in front of the dll.1.Start -- run -- msconfig -- start -- remove the tick from the add-on***dll. Restart the computer, usually to this is it, if it still pops up, then proceed to the second step 2, start - run - regedit in the following position to delete the corresponding key value:

hkey_current_user\software\microsoft\windows\currentversion\runhkey_local_machine\software\microsoft\windows\currentversion\run

Questions. I can't get into the start menu, and this appears before I turn on the display desktop!

Keep pressing F8 when you turn it on, if it doesn't work, it may be a hardware problem.

Only to go to the maintenance personnel for repairs. Questions.

Thank you, if you think mine is okay, you can give a thumbs up [heart].

Computer processes are currently in use by our computer, but sometimes we need to close some processes, and when we close it, we often encounter some cases that show that access is denied, what should we do when we encounter this situation?

Method steps.

Right-click the taskbar to open Task Manager, and click Processes in Task Manager.

Please click Enter a description.

Select the process you want to close in the process and click [End Process] in the lower right corner, of course, it is simple to close this way, what we need to understand is the situation that it cannot be closed, so let's continue to look down.

Please click Enter a description.

In Task Manager, click View in the menu bar, and click to open Select Columns in the View sub-options.

Please click Enter a description.

In the list of selected processes, we need to check the [pid] option, which is the hardware identifier of each process, representing the ** of each process.

Please click Enter a description.

After selecting, return to the process and you can see that there is already a [pid] item, and it is the QQ process that is ready to be closed, and the pid value here is 11368, remember this value.

Please click Enter a description.

Next, press the [Windows] key + [R] key on the keyboard at the same time to open the operation interface, enter [cmd] and click [OK].

Please click Enter a description.

Enter the command window and type [taskkill pid 11368] and press enter.

Please click Enter a description.

After clicking, the process will be closed, and a termination signal will be sent to the process in the command window, thus completing the process shutdown.

Please click Enter a description.

Generally speaking, the refusal of access to a folder is mainly caused by a virus or insufficient authority of the administrator

A virus on your computer is causing the folder to be denied access.

Usually some stubborn virus files like to hide in some folders, if the computer is virus, it may destroy the management authority, resulting in access to the folder is denied, so when encountering a folder refusal to access, first check whether it is caused by virus damage, using some mainstream antivirus software, generally can fix the problem.

User permissions are insufficient.

Many users may not use the administrator account to log in, but use VIP users to log in, so some important system files will not have access to, so this kind of problem to check, in addition, it may be that the administrative user did not add permission to this folder.

Once the computer shows that access is denied, it means that this ** does not meet the regulations of the computer security system, so it should be carefully considered.

Step 1: Restart the computer, press the F8 key, and the selection menu will appear;

The second step is to select the last correct configuration, try the safe mode, if you can enter the safe mode, you can uninstall the recently installed software or driver;

Step 3: If you still can't do it, you can only redo the system.

1.Open the browser that comes with your phone or computer.

2.Click on the three-dot icon below.

3.Click Settings.

4.Click Security & Privacy, and turn off the switch on the right side of "Safe Browsing" to remove the access restriction of Air Minsitization**.

It is a tool for human-machine communication. It consists of three parts, namely the three elements of **, domain name, space, and source file. Together, they form a single ** that can be browsed and used.

The source files contain the design of the web page, the front-end, the background program, the data, and so on.

Space: Space is generally composed of CPU, memory, bandwidth, database, IP address, and space capacity. It is used to store the content and the data generated in use. <>

**Access denied can be due to a number of reasons.

The most common cause is a failure of the server where ** is located, resulting in unreachability. Another common reason is that the domain name used has expired and is inaccessible. If you encounter a denial of access, generally speaking, the first thing to check is whether the server is running normally, and if the server has stopped running, you need to try to restart the server.

In addition, you should also check whether the domain name has expired, and if it has expired, you need to renew it as soon as possible.

Some browsers block certain types of files by default, causing ** to display abnormally. Some other reasons are due to content violations, which are blocked by browsers. Then there are some ** due to technical problems that cannot be displayed normally.

4: How to ensure that it can be displayed normally on different browsers.

3. To ensure that the server settings are incorrect, you need to do the following: 1. Use the latest browser 2. Configure the browser correctly 3. Ensure that the server settings are correct.

The basic building blocks of a web page.

Web pages are made up of basic elements such as text, images, animations, hyperlinks, etc.

The list n parts are as follows: Text: In general, the most content guide in a web page is text, and you can set its font, size, color, shading, border and other attributes as needed.

Images: Colorful images are an indispensable element for beautifying web pages, and the images used for web pages are generally in jpg format and gif format.

The navigation bar is a set of hyperlinks that make it easy to navigate the site. The navigation bar is usually composed of multiple buttons or multiple text hyperlinks.

Animation: Animation is the most active element of a web page, and creative and well-crafted animations are one of the most effective ways to catch the viewer's eye. **：

It is an element in the HTML language, mainly used for the layout of web page content, the appearance of the whole limb skin Zheng web page, and the position of each web page element in the web page can be precisely controlled by **.

Summary. Hello, there are two reasons for this, the first is that your network is not good, so when you open it, it will show that your access is denied, then you have to check the network, and the second is that the information of the ** has been deleted, so you can't see it, and your access is denied.

Hello,There are two reasons for this,The first is that your Jiheng Xian network is not good,So when you open it, it will show that your access is denied,Then you have to check the network,The second is that the ** Ming Pai letter block was deleted,So you can't see it,Rejected your access。

Visit a ** prompt "The server rejected your browsing request" is what's going on1It may be the other party** or the server problem, not your problem. 2.

If you can't connect to the Internet or can't refresh the web page, there is a problem with your computer or your network. 3.In this case, you may be talking about a problem with the database or server on the other side.

4.**If the server is not configured correctly, this prompt will appear when returning to the stool. Some database problems can also occur.

The most common reason why a web page is denied access to your website is that the server where the website is located is down, making it inaccessible.

1: Another common reason is that the domain name used by ** has expired, resulting in inaccessibility, if you encounter ** access is denied, generally speaking, the first thing to check is whether the server is running normally.

2: If the server has stopped running, you need to try to restart the server, in addition, you should also check whether the domain name has expired, if the domain name has expired, you need to renew it as soon as possible.

3: Some browsers will block certain types of files by default, resulting in abnormal display, and some reasons are**content violations, banned by the browser, and some** due to technical problems that cause normal display.

Workaround for web page denial:

1. Use your phone to open the browser, click on the menu option, enter the settings, switch to the security settings, and then turn off the **security cloud detection, and you can access it normally next time.

3. It may be that the browser is not compatible, try other browsers to visit the web page, it is recommended to UC, Chrome, Quark and other big-name browsers, if you use small-name browsers, the browsing speed will be very slow. <>