-
Anonymous users2024-02-06If you install the system with a U disk, the C disk restore fails, which is caused by the wrong setting, and the solution is as follows:
1. Restart the computer first and press the delete key on the keyboard.
Once in the BOIS, change the AHCI mode to the IDE mode.
2. After entering PE, select the DiskGenius icon and double-click to open it.
3. In the DiskGenius window, select Quick Partition Tool.
4. In the DiskGenius window, click the Hard Disk menu.
5. When the drop-down menu appears, click on the Bad Sector Detection & Repair option.
6. In the Bad Sector Detection and Repair window, click Select Hard Disk.
7. Finally, click the Start Detection, Try Repair button to repair the hard disk, and you're done.
-
Anonymous users2024-02-05You can change the system image file and try to install it.
1.Use U Boot USB flash drive boot disk maker to make a boot U disk;
set to boot from the USB flash drive, and put the previous image into the USB flash drive;
After the disk starts, select the item with a similar meaning of "ghost manual installation" on the boot interface, and select the installation source as the system you put in the USB flash drive, and the installation path is your C disk. Or select PE in the interface,And then there is a one-click installation software in PE (just on the desktop),Select the image you put in U,Install it in your C disk。 A progress window will appear, and you will restart when you are done.
5.After restarting, remove the USB flash drive, and then the machine will be automatically installed by itself, just click "Next" or "OK", until the installation is completed.
-
Anonymous users2024-02-04There are the following causes and solutions:
1. The ghost image or ISO file may be damaged, it is best to use MD5 to check it.
<>3,Disk interface mode,This is also a scheme that can be tried,But win10 generally uses AHCI mode at the beginning,IDE,AHCI These two modes can be replaced,Non-server is not recommended to choose RAID mode。
4. If there is a problem with the disk partition table, back up the data, re-establish the partition table, and re-partition.
5. There is a boot mobile USB flash drive or hard disk inserted on the computer host that affects the default boot item of the system and causes the restore failure, after using the USB flash drive to restore the system, pay attention to adjust the hard disk as the first boot item.
6. If there is a problem with the memory, take out the memory of the computer to wipe the gold finger, it is best to use alcohol or an eraser.
-
Anonymous users2024-02-03When many friends use the installation software to reinstall the system with one click, it prompts that the C disk is restored and fails, what is going on? In fact, most of the reasons for this situation are that the C disk space is not enough, so how to solve the failure to restore the C disk?
1. If you are using a disc reinstallation system, please replace it with a different installation disc to reinstall the system.
2. If you use software such as One-Click Restore to restore the previous system backup, then please reinstall the system through a CD-ROM.
3. Generally, this problem occurs because the current ghost version is too low, and the above version is used for restoration, or it is caused by the loss of restore files.
If the C drive fails to be restored when the system is reinstalled, it is usually due to insufficient memory on the C drive or residual system files.
-
Anonymous users2024-02-02Summary. 3. If the computer does not turn on, you can also use the USB flash drive PE system for installation.
The premise is that the ghost file already exists.
4. Make a U disk PE system or a U disk image system
After using U to boot into PE and restore C disk successfully, reboot the system cannot be installed.
1. Determine whether the restored disk is C disk, or if other disks have a system. 2. Your current screen shows that the startup manager is wrong, 3. It is recommended that you re-enter the PE system, format the C drive, and then restore it. It can also be done as follows:
3. If the computer does not turn on, you can also use the USB flash drive PE system for installation. The premise is that the ghost file already exists. 4. Make a U disk PE system or a U disk image system
**A "Boot Master" (a pure boot tool), and then make it into a USB flash drive boot disk. Search for the Windows system image file. Reinstall the system according to the one-click U disk installation system tutorial on the official website of the U disk installation master.
Hello. I found a tutorial.,With **.,I think it should be useful to you.。 >>>More
There are many netizens in the home of Windows 7, among which there is no shortage of local tyrant netizens who buy Apple's Mac, and Mac uses Mac OS. Although the Mac OS system is strong, Microsoft's operating system has made the Chinese people accustomed to it, and it feels like the Win7 system is still grounded. Therefore, many Mac users want to install the computer as a win7 system, this article brings how to install win7 system with a USB flash drive to serve these tyrant friends. >>>More
Show hidden files, and then look at which files and windows folders are in the hard disk, then this must be your system disk, the system is not necessarily installed in the C disk, and the C disk is not necessarily the first boot disk, and the C disk is not necessarily the first partition or the first main partition. >>>More
Detailed tutorial on how to make a USB flash drive PE system. >>>More
Set boot boot from USB flash drive or you boot file error.