How to use a U disk to install a dual system to know how to come

Hello. I found a tutorial.,With **.,I think it should be useful to you.。

You refer to it, if you are satisfied.

Reference address.

Install the two systems on different system disks

1. Use [U Boot USB Boot Disk Maker] to make a U disk boot disk and install it, restart the computer, after starting, it will directly enter the U boot main menu interface, select U to start Win8PE Standard Edition (new machine) and press the Enter key to enter.

2. After entering the PE system, the system will automatically pop up to start the PE installation tool, then select the win10 image file, install it in the c disk, click OK, 3, restore the operation, and then automatically restart and complete the installation of the win10 program.

4. Re-boot the U disk into the PE system, select the Win7 system image in the installation tool, and install it on the D disk, don't duplicate it with the C disk, because the C disk has been used as the system disk.

5. Uncheck the "Restart after completion" option and click OK.

6. Find the "Repair System Boot" tool on the PE desktop, run the repair system boot tool to repair the system, 7. Restart the computer after the boot repair is completed, click the win7 option, and complete the installation of the win7 program.

Take the installation of win10win7 dual system as an example:

1. Insert the prepared [U Depth USB Boot Disk] into the computer and restart it.

2. After entering the U disk and starting, select and run the U deep win8pe installation and maintenance version (new machine).

3. After entering the PE system, the desktop will pop up by itself, and the installation software will run and load it automatically, select the win10 system image (put the win10 and win7 systems into the iso folder in advance), and install them in the c drive.

4. After the win10 image is released, the computer will automatically restart and install.

5. After the win10 system is installed, repeat the above steps to enter the win8pe system; Refer to step 3 to select and install Win7 on the D drive, but do not check Restart or do not restart after the image is released.

6. Do not restart the computer after the win7 image is released! Open the Boot Repair tool on your PE desktop and perform the boot repair.

7. After booting the repair, restart the computer, choose to run the win7 system, and complete the installation of the win7 system.

I'm using a providential U disk system.,There's a fix for startup items ghost After restoring the image file to the partition you want to install.、Select Repair Startup to write the newly installed system startup items to the C drive.,The second system should not be put together with the first system There will be problems when sharing files

Sometimes we find it difficult to choose between Win7 and XP, and we want to play to their different strengths. In this case, a dual system would be a very good option for us. So, how to install a dual system?

This topic will take XP and Win7 dual systems as an example to explain how to install dual systems.

In general, we need to install the XP system first, and then install the Win7 system. In this way, the installation of the dual system will be very simple. If the installation of XP has been completed on the current computer, the installation of Win7 will be more casual.

The easiest way is to insert the win7 installation disc and run the win7 installer after entering the xp, so that win7 can be as simple as installing ordinary software. However, it is important to note that you must choose a fresh install rather than an upgrade installation. When choosing the partition where you want to install the system, you must not select the partition where the XP is located.

Just do both. After restarting and installing according to the prompts, the dual system was smoothly realized.

We can also reinstall the system as usual, insert the win7 disc before entering the xp system, and complete the installation of win7 guided by the optical drive, but also to choose a new installation, and select the partition where the non-xp is located.

It should be said that the above two ways are very simple. However, if you already have a Win7 system in your computer, and then you want to install an XP system, how to install a dual system?

It is not possible to install the XP installation disk under Win7, because Windows only supports the installation of the system to a higher version. But we can boot the installation disc of XP before starting Win7, and install XP with the normal installation steps of XP. However, it should be noted that the target partition of the system installation is selected as the partition where the system is not located.

The more convenient and fast way is to use ghost to restore the XP system image to the partition where the non-win7 is located, which has a higher success rate (but this method needs to carry out the following repair steps under PE, because the XP is likely to fail to boot if it is not restored to the C drive).

In this way we will enter the XP system when we turn it on. The work on the dual system is not complete because our win7 is gone. Do not worry.

Once in XP, we have a small piece of software called ntbootautofix (or bcdautofix) (of course, it's best to have it ready before installing the system). ** After opening the software, select "Auto Repair" on it.

At this time, restart the computer, and we will be able to see the boot menu of the dual system. It can be seen that the installation of dual systems is not difficult. Now, we can experience the powerful entertainment features of Win7 and the efficiency of XP at the same time!

At the same time, it is also recommended that you use Kingsoft Guardian to protect your dual system. It takes up very little system resources, but it can provide comprehensive and careful protection for your computer, and can also make convenient and rich optimization of your system, so that your dual system is like a tiger with wings!