Fangmu floor brick 37 method, wood grain brick 28, 37 paving which is better

Half paving method Half paving method is also known as "I-shaped method". After paving, the short-side seam of the two floors is located between the upper and lower floors, which looks like a "work" character. All seams are interlaced.

369 paving method 369 paving method is one-third paving method. When completed, the short-side joints of the two floors are located one-third of the upper and lower floors, and the short-side joints are stepped as a whole. Circular paving The cyclic paving method is actually "casual" paving.

When laying, the flooring is laid in a row in a row perpendicular to the window, and the remaining flooring is stacked in a second row, so that the loss of the floor is minimized. The "green core" logo of wood flooring is moisture-proof and waterproof and not environmentally friendly, and green core flooring is not equal to environmentally friendly flooring.

There are many factors in choosing flooring or floor tiles, depending on the size of your home, the decoration style of your home, and your personal hobbies The floor is also divided into solid wood flooring (relatively high-end, expensive, the color selectivity is relatively small, and regular maintenance is required) composite flooring (cheap, wear-resistant, without special maintenance, it does not look high-grade compared to solid wood) Solid wood parquet (integrated into the advantages of the first two, **moderate) floor tiles are divided into bright light and matte, and now use more matte floor tiles to look cold, But it is very easy to take care of Many people will lay tiles in the living room, bathroom, etc., and lay floors in bedrooms, study and other places.

1.Rotate the square laying method 45 degrees. 2.This method is a bit close to the traditional paving method, that is, the straight line is very smooth, infinitely extended, and has a good visual impact. I hope my answer can help you.

Floor heating is laid first, then a layer of keel is put on top of the floor heating, and then a solid wood floor is laid. Floor heating is divided into electric heating and water heating, and the heating speed is slow and the power consumption is inconvenient to change the water. It is recommended to choose electric heating.

Actually, it's okay, and it will look better if you choose 3:7.

Kangtuo wood grain brick reminds you: the commonly used wood grain brick paving method, in addition to the traditional ceramic wall and floor tiles the same well-shaped regular, horizontal and vertical paving method, wood grain brick also has two eight shapes, three seven shapes, dislocation and other paving methods. There are many ways to pave it.

Each has its own merits. So be sure to work with the designer to confirm the plan first.

Of course, it is a wooden floor, the texture of the wooden floor is natural, and the wood grain bricks are uniformly made.

I've heard of it, it's very famous, an arrow wood grain brick, wood friends wood grain brick, Mufu Huating wood grain brick, Mufu Fengyun wood grain brick, Jingmu wood grain brick, Ding wood grain brick, Chi wood ceramic wood grain brick, Annunciation wood grain brick These eight series are all one arrow ceramic, and the eight series that have recently made the most popular are very popular

Start with one side and make three trips and one cycle to catch up: again.

Solid wood floor maintenance method 1:

The moisture-proof of solid wood flooring mainly includes two aspects: one is the moisture-proof treatment during paving, and the other is moisture-proof during ordinary use. When laying wooden floors, it is necessary to lay a moisture-proof film, apply moisture-proof oil, and do not use damp plywood and wooden fangs.

Pave floor tiles or stones on the floor of the door in the kitchen, toilet, etc. as a transition to prevent moisture from entering and exiting, and reduce the moisture process near the floor at the door.

Solid wood floor maintenance method 2:

There are also ways to improve the surrounding environmental conditions. If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low, and if the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In humid and muggy weather, you can turn on the air conditioner or electric fan, which will also reduce the humidity.

But if the weather is dry or the air conditioner is used for a long time, then it is not moisture protection but moisturizing that should be considered. Because the humidity in the room is low in this case, it will cause the solid wood floor to shrink or crack. At this time, you can use a damp mop to mop the floor to keep the solid wood floor a certain amount of moisture.

Another issue that needs to be noted is that the floor and walls of the newly built buildings have a large moisture content, so more ventilation should be provided to make the floor and walls dry as soon as possible.

Solid wood floor maintenance method three:

In daily life, it often happens that you accidentally spill water on the ground, so you don't need to be nervous, because as long as the amount is not large and the time is not long, it will not have any impact on the floor, as long as it is dried in time. If it is rainy or humid in the south, some people will worry about the increase in the moisture content of the solid wood floor, which will cause expansion and deformation. In fact, the solid wood flooring on the market is now basically treated with paint, and the ability of the floor to absorb moisture is greatly reduced, and the increase of moisture content requires a long time and process, so consumers do not have to worry too much.

Solid wood floor maintenance method four:

In addition, choosing the material of solid wood flooring according to the environment is also a wise move to prevent moisture. For example, in more humid areas, you can choose materials with low deformation, such as teak flooring, etc., and choosing high-quality floor paint is also a very effective way to prevent moisture.

The six-sided glaze sealing technology of Beillac blue and white porcelain flooring can completely eliminate the intrusion of moisture into the solid wood floor at 360 degrees, so that the solid wood floor can be effectively kept in a dry and comfortable environment suitable for the use of solid wood flooring for a long time, so that the solid wood floor can be used for a longer time.

1. Clean and waterproof.

Daily maintenance of sports wood flooring, cleaning work should be done every day. When cleaning the floor, be careful not to use a wet mop and not to sprinkle water on the floor.

2. Rainproof.

When it is windy and rainy outside, the stadium should close the windows in time to prevent the outdoor rainwater from drenching on the sports wooden floor.

3. Prevent stagnant water.

Stadiums should do a good job of daily inspection of water pipes and plumbing and other facilities to prevent water leakage. Although the sports wood floor has moisture resistance, the result will be terrible if the stadium leaks and the sports wood floor is soaked in water.

4. Indoor ventilation.

The indoor air humidity of the stadium is high, and if the stadium cannot meet the ventilation requirements, the sports wood floor will swell due to moisture. Proper ventilation and constant humidity and temperature in the stadium are good maintenance for the sports wood floor.

1. Ground moisture-proof treatment method:

Generally, "three layers of oil and two felt" (three layers of asphalt and two layers of linoleum paper, and then a layer of cement is smeared on top to prevent the release of harmful gases); The simple treatment method is to apply a moisture-proof film.

2. Balance the plate expansion by installation:

Some add a layer of splint to the keel, some use aluminum alloy keel, some require springs in the expansion joints of the wall floor, some require wide gaps between the plates, some require traps to be left at the four corners of the room to facilitate the release of moisture, and some adopt the installation method of track-type wooden flooring.

3. Plate moisture-proof treatment method:

The back plate is painted and waxed, and the aluminum-platinum and plastic-coated are nanotechnology.