Which lotion makes floor tiles shine and remove stains?

To remove the stains on the floor tiles, you need to use a detergent, but many of them on the market now do not work, or they are more expensive and not worth it.

Self-prepared lotion: 450 grams of soap (cut into small pieces), bleaching clay and baking soda each into a pot, add 2300 ml of water to mix thoroughly, boil them to low heat and simmer to half of the original volume, turn off the heat to cool and store in a container for later use. When encountering difficult stains, use a brush to brush the stains on the floor with this liquid, brush along the texture of the floor, then wash it with hot water, and wipe it dry with a dry soft cloth.

First, the steps of cleaning the tile method:

1.Wet the surface thoroughly and wear appropriate gloves;

2.Apply the product evenly to the surface of the tile;

3.The working time of the product is 5-20 minutes;

4.Heavy stains can be scrubbed vigorously with a brush;

5.Rinse thoroughly with water.

Second, the surface of the interior and exterior wall tiles is polluted by caulk, and the tiles can be cleaned with caulk.

Third, the internal and external wall tiles encounter pan alkali, and the tiles use alkali remover.

The alkali remover is developed according to the characteristics of various whitening on the surface of ceramic tiles and stones, and the corresponding alkali remover is scientifically designed according to the different types of whitening, which are natural whitening and reaction whitening cleaning agent. It can be used to clean the natural whitening on the surface of ceramic tiles, clear water tiles, clay products, natural stone and concrete products and the whitening formed after unscientific cleaning.

How to clean tiles:

First, determine the material of the material to be cleaned and the type of stain, and test the uncertain stain first;

Then according to the stain and material characteristics are cleaned with the corresponding cleaning agent, when the stain is heavy, the corresponding alkali remover can be poured on the stain for a period of time, and repeatedly cleaned;

When the stain is thick, use a shovel to remove the surface part before cleaning;

Mixed stains can be cleaned with Kelin tile cleaner and then with alkali remover.

Floor tiles can be washed with white vinegar, alcohol and dish soap to shine and remove stains, the specific cleaning method is as follows:

2. Take out a small bowl below and pour the dish soap into it first.

3. Pour the white vinegar into a small bowl and set aside.

4. Next, pour the alcohol into a small bowl and use it.

5. Then pour in clean water to dilute and dissolve the stains in the small bowl.

6. Stir with chopsticks before using it again, so that the effect is better.

7. Wipe the floor tiles with a rag dipped in the cleaning agent prepared in a small bowl.

8. Finally, the floor tiles can be cleaned and stains removed.

Toothbrushes and brushes are common, and they are also the most useful tools for cleaning dirt from crevices in tiles. The specific operation of this method is to use a toothbrush dipped in a small amount of stain remover to remove the dirt in the gaps in the tiles, and then use a brush to dip the waterproof agent and apply a strip on the gaps, "This method can not only prevent water seepage, but also prevent mold growth." Applies to:

Kitchen floors and walls, bathroom walls and floors, living room floor tiles.

Waxing clean. Floor waxing can effectively maintain the floor, and waxing tiles also has the effect of keeping the tiles bright and clean. Thoroughly clean all stains on the tiles, and if there is glue or stains, wipe them off with a mild detergent or scouring pad. Sprinkle the floor cleaner on the tiles first, then pour the water-based wax onto a clean dry mop and evenly coat the tiles.

After waxing, let the surface of the tile air dry naturally, and wait until it is dry before stepping on it.

Amway LOC, diluted and sprayed on the top and dragged directly, super clean and very bright.

There are specialized floor detergents, which are available in supermarkets.

Here's how to wipe the floor tiles bright and clean:

1. White vinegar. White vinegar is a good edible detergent, so to speak, white vinegar can be used in many aspects of life to clean, such as the kitchen will use white vinegar to clean, of course, bathroom tiles or other tiles can also be cleaned with white vinegar, white vinegar can clean oil and sterilization.

2. Toothpaste. In the past, toothpaste was used to clean the gaps of the tiles, and the gaps in the tiles were not easy to clean, but the toothpaste can effectively clean the gaps in the tiles, and the gaps in the magnetic beads can be cleaned with an old toothbrush dipped in toothpaste.

3. Baking soda.

Baking soda is often used in life as a chemical living item, especially baking soda as an alkaline substance, it is still very good in cleaning up oil stains, if the tiles at home are dirty, you can try baking soda, and you can clean the tiles well with a scouring pad dipped in soda.

4. Tile cleaner.

Tile cleaner is a kind of cleaning agent specifically for ceramic tiles to clean, this kind of cleaning agent is indeed very effective, as long as you buy a big brand of regular tile cleaner, basically no matter how dirty the tile can be cleaned.

5. Laundry detergent or dish soap.

Laundry detergent and dish soap are the most household cleaners, such as brushing dishes, brushing pots, brushing sinks, kitchen sinks, etc., you can use laundry detergent or dish soap, in addition to using in these places, in fact, if the tiles are not easy to clean with oil, and they are not clean with a linen cloth, you can try them with dish soap or washing powder, and there may be unexpected good results.

Floor tiles are one of the common floor materials in home decoration, which is not only beautiful and durable, but also easy to clean. However, how to properly wipe the floor tiles to keep them shiny and clean is a matter of concern. This article will introduce you to a few ways to make your floor tiles shine like new.

1.Remove dust from the surface.

Before you start deep cleaning, you should first remove dust and debris from the surface of your floor tiles. You can use a soft-bristled brush or mop to sweep the floor and make sure all the debris is completely removed. Doing so will better protect the surface of the floor tiles by avoiding the rubbing of dust and debris against the floor during the wiping process.

2.Choose the right cleaner.

It is very important to choose the right cleaner for your floor tiles. In general, neutral cleaners are the safest and most effective option. Be sure to follow the instructions on the detergent package and dilute the detergent in the correct proportions.

Using excessive amounts of cleaners may leave residue on the floor and may damage the surface of the floor tiles.

3.Wet mop floor tiles.

After diluting the detergent, gently wipe the surface of the floor tiles with a damp mop. Make sure the mop is not too wet to get moisture into the crevices of the floor tiles. Also, avoid using too hard or rough mops to prevent scratching the floor tiles.

4.Removes stubborn stains.

If there are stubborn stains on the floor tiles, such as oil stains or shoe prints, you can try the following methods to deal with them:

Use specialist cleaners: There are many cleaners on the market that are specifically designed to remove specific stains, choose the right one for your situation, and follow the instructions.

Homemade cleaner: Lemon juice, baking soda, and warm water can be mixed to create an effective homemade cleaner. Gently apply it to the stain and wipe it with a damp mop.

Steam cleaning: Use a steam cleaner to remove stains quickly and effectively without the use of chemical cleaners.

5.Regular maintenance.

In addition to regular wiping, floor tiles also need regular maintenance to keep them shiny and clean. Follow these care recommendations:

Avoid using too much water: Be sure to control the amount of water when wetting the mop to avoid too much moisture entering the brick joints and causing prolonged dampness.

Use carpets or mats: Placing carpets or mats in doorways or high-traffic areas can reduce the impact of stains and wear on floor tiles.

Regular waxing: According to the requirements of the floor tiles, use appropriate wax for regular care and maintenance.

With the right cleaning methods and regular maintenance, you can keep your floor tiles shiny and clean. Removing dust, choosing the right cleaner, wet mopping floor tiles, dealing with stubborn stains, and regular maintenance are key to maintaining the appearance of floor tiles. At the same time, be sure to follow the product instructions and pay attention to the use of appropriate tools and methods to ensure that the floor tiles remain in a beautiful and durable condition for a long time.

Soapy water: Floor tiles can be mopped with soapy water during daily cleaning. The method is to rub some soap into some foam in water, then soak it in soapy water with a cloth or mop, wring it out a little and scrub it for the first time, and then scrub it with water for 1 or 2 times.

1. Soapy water.

In general, we clean the floor with clean water, but if there are stains on the floor tiles that are difficult to remove, you can use soapy water to clean them. Moreover, you can also mop the floor with soapy water during daily cleaning, so that the floor will be kept clean and shiny. The method is to rub some soap in the water to make some foam, when it feels about the same, take a mop or cloth and soak it in the soapy water, and then wring it out (not too dry) to mop it on the place, after wiping it for the first time, then change it to clean water to wipe it a second time, if you feel that the floor is still relatively slippery, you can drag it a third time.

2. Dish soap.

There are many detergents in the home that can be used to clean floor tiles, such as dish soap. In daily cleaning of the floor, you can squeeze some dish soap in the water and stir to mix, and then use a mop or cloth to scrub it. However, the dish soap is more foamy, and after the first time, you need to use water to drag it more, so that it will not slip.

3. Sawdust + laundry detergent.

Usually, when taking care of the floor tiles, you can use sawdust and laundry detergent to clean them, and the effect is very significant. The operation method is to sprinkle sawdust and laundry detergent on the floor, and then take a damp cloth to wipe the floor with sawdust laundry detergent, so that after wiping for the first time, then wipe it with water and wipe it again, so clean enough that the floor is very clean and bright.

4. Salad oil.

Salad oil is also one of the items that can make the floor shiny. All you need to do is add a few drops of salad oil to the water in which you are cleaning the floor, and you're good to go. The floor cleaned in this way is much brighter than the floor that is cleaned directly with clean water.

5. Baking soda.

Baking soda has always been a must-have item for decontamination in the home, so baking soda can also be used to clean the floor. The cleaning method is to mix baking soda with water in a certain proportion, then dip it in with a cloth, wring it out slightly, and wipe it off. For areas where the stain is more obvious, you can sprinkle some baking soda alone, and then wipe it with a damp cloth.

Maintenance method of floor tiles:

1. Daily cleaning: The daily cleaning of floor tiles can be cleaned with water and detergents, such as detergent, soapy water, etc.

2. Scratch treatment of floor tiles: the floor tile floor should be kept clean frequently, dust and gravel should be removed in time to prevent abrasion of the brick surface, when there are slight scratches on the surface of the floor bricks, a little toothpaste can be applied to the scratches, and the scratches can be wiped repeatedly with a soft dry cloth, and then the floor wax can be applied to make the tiles as bright as new.

3. Special pollutant cleaning method: After the surface of the floor tile is polluted, it should be wiped with a soft cloth immediately and rinsed with water.

Type of contamination: Detergent.

Tea, coffee, ice cream, oil Naoh, KhCO3 and other dilute alkaline solutions.

Sediment, ink, rust, mortar HCl, HNO3, H2SO4 and other dilute acid solutions, the ink is best cleaned with oxalic acid.

Paint, drawing pen turpentine, trichloroethylene, acetone.

Soy sauce, wax, toner acid or alkali solution.

There is a lot of information on the muddy linseed oil that can be referred to, and I think it is quite practical and can save a lot of trouble.

The floor is used in every family, and good cleaning and maintenance of the floor can also increase its life and keep it permanently bright. Next, I will teach you how to wipe the floor to make the floor tiles cleaner!

1.Floor cleaner.

As for floor cleaners, there has been no one that is specifically suitable for home operation and suitable for use on solid wood floors (most of the cleaners need to be diluted with water and need to be used in conjunction with the relevant equipment). Therefore, floor cleaners are mainly used on engineering floors that are not sensitive to acidity, alkalinity and water immersion, such as plastic flooring.

2.Clean with water.

This approach is certainly more harmful than beneficial. However, most families who have finished laying wooden floors choose to use someone from a cleaning company to do the cleaning. I can't help it, and I know that the cleaning method of these cleaning companies with wet mops is not good, but it is convenient.

Only after you have learned a better way to ask them.

3.Wipe with a dry towel.

This approach belongs to those who have a soft spot for hardwood flooring. Most of them are very attentive when it comes to floor maintenance. The purpose of its operation is also far from routine cleaning. The specific method is cumbersome, so I won't describe it in detail here.

4.Use a vacuum cleaner to clean.

Since the brush head of the vacuum cleaner is difficult to achieve the desired effect when cleaning the edges of solid wood floors, not many people use this method for a long time.

1. Daily cleaning of ceramic tiles can be cleaned with dish soap, soap, etc. 2. Use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny. 3. The polished tile should be waxed regularly, and the time interval should be 2-3 months.

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches, and wipe them with a dry cloth to repair them. 5. The gaps between bricks and bricks can be removed from time to time with detergent, and then a layer of waterproof agent can be brushed on the gaps to prevent the growth of mold. 6. Sodium hydroxide or potassium bicarbonate solution is used for pollutants such as tea, coffee, beer, ice cream, and oil.

7. Ink, cement and other pollutants use dilute solutions such as hydrochloric acid and nitric acid. 8. Use special cleaners for paints, coatings and other pollutants. 9. The rust can be washed and removed with 2 oxalic acid solution, and then wiped with water.

After grinding 3-4 vitamin C tablets into powder, sprinkle them on the surface of the floor tiles, and then scrub them with water several times to remove rust stains. If it is rust stains, you can use 10 oxalic acid and citric acid to add water mixture to soak the rusty area, and then rub it again with concentrated salt water. If you have fresh lemons, you can squeeze out the juice and drop it on the rust stain and rub it by hand, repeat several times until the rust stain is removed, and then wash it with soapy water.

10. All kinds of glue can be removed with banana water, pure banana water is a colorless, transparent and volatile liquid, with a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting.