If you install a stairlift, what kind of staircase environment does you need to have in your home to

What scenarios are barrier-free stairlifts suitable for?

1.Nursing homes, community nursing centers, etc. without elevator installation conditions.

Many nursing homes and community nursing centers are built in the old city, which can maximize the elderly to live in their familiar environment, but the vast majority of buildings in the old city do not have elevators, and in many cases are not suitable for installing elevators. At this time, it is more suitable for lightweight barrier-free stairlifts to "show their strength".

2.There is no elevator in the public activity space or the neighborhood committee activity room for the elderly.

In order to enrich the spiritual and cultural life of the elderly, some neighborhood committees will set up activity centers for the elderly and arrange many colorful activities. These measures to care for the elderly have won a lot of praise, but there are also some senior activity rooms that cannot be equipped with elevators due to the condition of the site. However, the installation of barrier-free stairlifts can easily solve the inconvenience of going up and down the stairs, so that the elderly who are not able to move can better integrate into the activities and communicate with their neighbors.

3.Installed and used by individual households.

Now the living conditions are good, many people live in the villa, I thought that I could take my parents to enjoy the joy of family, but the villa often does not have an elevator, and the installation of elevators in the later stage not only has to face a lot of cumbersome procedures but also to deal with the huge amount of work. Barrier-free stairlifts have become the new favorite of the times because of their small footprint, easy installation, easy operation, personalized customization, and relatively low cost, which not only solves the problem of going up and down the stairs but also improves the overall home decoration grade!

If it is a straight staircase up and down, the width of the steps is greater than that, you can install a stairlift, if it is a curved staircase, the width of the steps is greater than 69cm. In addition, the slope of the staircase also needs to be considered, if the staircase is too steep beyond a certain technical limit, then it is not suitable for installing a stairlift.

The installation of stairlifts does not require the change of the existing staircase structure, and can be installed directly next to the stair handrail. Before installation, the consent of the neighbors is required, after all, the area of the staircase is occupied, the width of the stairs needs to be greater than meters, and the inclination is less than 52 °, basically the existing stairs meet the installation conditions. Learn more about the search for Tianjin Liuyuan Technology****.

Living on the 5th floor, the stairs are public stairs, community houses. What are the requirements for installation? For example, the width and height of the rail staircase, what else should I pay attention to?

Public stairs can be installed.

Requirements for stairs for the installation of curved type:

The net width of the staircase is not less than 70 cm, the inclination angle is not more than 52 °, and the main material of the staircase: concrete, steel structure, pure solid wood.

You only need to leave a power socket, the upper end or the lower end, that is, the starting point or the end point, leave a 5-hole socket, the charger uses a 3-hole position, and the household electricity is 220V

ps;The convenience brought by the elderly stairlift to our life is very great, especially for families with elderly people at home, it is very necessary to install a home stairlift at home, it can help us go up and down the stairs, ensure our safety, and is a very good product.

There are certain requirements for the corridor during installation, the width of the stairs cannot be less than 80cm, and the maximum floor height is 7 floors.

Because it will occupy a common area, it is necessary to communicate with neighbors in advance. In terms of technology, as long as the width of the staircase is greater than 69cm, and the angle of inclination of the staircase is less than 60°, the stairlift can be installed. For more information, please search for Suzhou Jianyingmei Health Technology online.

The requirements for installing stairlifts are not very high, as long as the net width of the stairs is not less than 75 cm and the inclination angle is not more than 52°.

I think the most important thing is to find a professional company to install a little better, otherwise it is a peace of mind to install it, if there are a bunch of problems it is not good, my friend's villa is very good, it looks very atmospheric, practical and safe, if you have money, you can install one, ha.

I don't know what kind of home ladder is suitable for the specific space conditions of your home. There are many types and specifications of household ladders.

The cost after installation is basically the operation and maintenance cost of the elevator, which is also determined by the specific trapezoidal shape and maintenance form, which is very different.

2 square meters of space, you can install a small home elevator, depending on the configuration, good imports of two or three hundred thousand, domestic hundreds of thousands, tens of thousands of is not recommended to install. The cost of annual maintenance also varies from manufacturer to manufacturer.

As a large precision furniture for home use, the small household elevator has high requirements for the installation environment, and the quality of the installation determines the operation and service life of the elevator, so the owner must determine the installation conditions of the elevator before installation, and strictly implement it.

1. Vertically penetrating hoistway space.

No matter where the home small elevator is installed, it needs to have a vertical space. This point needs to be paid special attention to when cutting the floor slab to install a small household elevator, many times the owner and the construction team do not communicate well, it is easy to have such a situation: the size of the hole cut on each floor is the same, but it is not through in the vertical space, so that the elevator can not be installed, and secondary construction is required, which is a waste of time and manpower.

2. Reserve enough pit and top layer height.

Elevator installation generally requires a reserved pit. Screw type small home elevator can be installed without a pit, or a pit with a maximum depth of 50mm is required, so in addition to being installed in the traditional villa environment, it can also be installed in a high-rise duplex building, which can not dig deep in the pit environment, and the installation is convenient and flexible. For safety reasons or due to the structure of the elevator itself, the elevator installation should also reserve enough space for the top floor height.

3. Determine the position of the power supply and wiring.

Because of the different structures, the power supply location of small home elevators is also different. The power installation location of small home elevators varies: some need to be reserved at the top, some need to be reserved at the 2nd floor, and some need to be reserved at the bottom.

If the standard speed is selected, a 220V single-phase three-wire power supply is required, and the optional speed requires a 380V three-phase five-wire power supply.

4. The hard decoration work at home is completed.

If the elevator has been installed before the decoration of the house, a large amount of dust generated during the decoration process will enter the elevator, on the one hand, it is difficult to clean, and more importantly, the fine dust enters the elevator structure, which will affect the normal operation of the elevator and greatly shorten the service life of the elevator. Therefore, the installation of small home elevators must be carried out after the renovation is completed.

Home elevator main rotten land to have screw elevator, hydraulic elevator, traction elevator three, with the improvement of the economic level, many villas or self-built houses are installed with home elevators. So, what is the installation of the home elevator to tremble? Next, pchouse will take you to find out.

1. The home must have a vertical hoistway space, and the area is larger than the elevator.

2. It is necessary to set aside a sufficient height of the pit and the top floor to install elevator accessories (screw home elevators can be installed without pits).

3. There must be an interface that can be connected to the elevator power supply to ensure that the elevator can be put into operation normally, due to the different structures of home elevators, the power supply location is also different, some are reserved on the 2nd floor, and some are reserved at the bottom.

4. The elevator can only be installed after the house is fully renovated.

Inspection equipment: all hardware products should have outer packaging acceptance, unpacking acceptance, power-on acceptance, operation acceptance (such as power-on 24 hours or 48 hours), after receiving the elevator product, the user needs to check the equipment first, if there is damage and scratches, contact the home elevator company in time for replacement. If it is a quality problem, then the user needs to check whether there are any missing parts according to the results of the product and experience they have purchased, and do not sign for installation without blind posture.

Because it is proved that there is no problem with the product after signing and installing, the small problems of the subsequent inspection and grinding will be a headache for the user.

Installation environment: Ensure that the installation environment can be used for equipment installation, and the corresponding traces are complete, so that the construction team can work faster. The installation of home elevators to ensure the safety of users, quality assurance is necessary to pay attention to inspection, if there is a problem in the installation process found in time, timely feedback to the home elevator manufacturers, reduce their time and financial losses.

Construction team qualification: It must be carried out by a team with installation qualifications, or assigned by the manufacturer.