How is it better to have a beam ceiling in the living room?

My living room also has beams, the ceiling was selected at the time, their designers are not bad, and the plan is measured in advance to solve this problem. And I installed the MGRG gypsum top, the polymer board used, the shape is easier to do, and then with the gypsum side hanging, the effect will be better-looking, and it is also more environmentally friendly, and there will be no formaldehyde pollution.

How to decorate the living room with beams across the living room.

In the living room, unsightly beams and columns will also be a headache for people. If you want to "cover", in fact, there are not many of them, as long as they are deliberately designed to be symmetrical, or directly wrap the beams and columns in indirect lighting, forming a design shape of equal height on all sides, so that it will not look too abrupt.

Scheme 1: Separate the space under the upper cover beam.

In the design of the ceiling, a large arc can be used to weaken the beams with indirect lighting, so that the whole living room space looks tall and bright, and also allows different fields to have the most suitable conversion zone.

Scheme 2: Indirect lighting increases the sense of hierarchy.

In the space decoration, through the design of indirect lighting, the visual beams in the living room space can be reduced, and the privacy effect of the white film glass behind the mirror wall can be multiplied, supplemented by the elevated design, which can also change the space with different functions.

Scheme 3: Incorporate a variety of design elements.

Of course, if you don't want the living room ceiling to be too monotonous, then you can use glass, mirrors and other elements to add a sense of fashion, such as the black acrylic carved totem, which can add points to the living room space.

Second, how to decorate the beams in the living room close to the wall.

If the beams in the living room are close to the wall, the most common solution is to use the shape to cover or divert the attention of the eye, so as to reduce the sense of oppression. For example, the arc cladding model.

Scheme 1, arc transition design.

The "elimination" of the beam at the top will be decorated with an arc wrapping, of course, before that, it must be noted that the arc should match the size of the beam, so that the entire arc line is softer and smoother.

Scheme 2, arc coating design.

If the position of the beam is more obvious and the depth is not particularly large, then the design of complete coverage with an arc can also be used to reduce the drop and pressure around the beam, so that the lines of the ceiling are smoother, and the beam can be easily blurred.

Scheme 3, arc coating + indirect light source.

The irregular ceiling design, arc wrapping and supplemented by indirect light sources, make the small space also have rich visual levels. Follow the moving line with an arc to resolve the oppression of a small space. It can not only achieve the effect of decorating beams and columns, but also hang hidden air conditioning.

You can make a dark light there, widen the beam by 15 cm with a laminated flat beam, install a dark light inside, and install it in all directions, and it will look good if you need a few more. Then set back 10 cm to make a suspended ceiling.

The treatment of the top beam often tests the designer's design ability, if the beam is in the living room, not only will make people feel oppressive and uncomfortable, its position is just around the important space, then there is a beam ceiling in the middle of the living room, how to decorate?

First, the shape of the partition space.

In the living room, the beam across the living room is generally at the junction of the living room and the dining room, this kind of beam is easier to handle, the living room and the dining room are separated from the ceiling modeling, and the beam can be used to do the division, one side is at a level height with the beam, and the other side is more than 10 centimeters lower than the beam surface, and the stepped division space is made; If the beam is on the edge, it can be made into a hollow shape, leaving the light groove and installing a light tape to cover it to hide or divert attention.

Of course, there are self-built houses, and the beam with a large span will definitely be in the middle of the living room, which can be done in parallel with the beam, so that the beam can not be seen carefully, and the living room can also be divided into two halls, one for the living room, one for the dining room, or a leisure world.

Second, false beam modeling.

The false beam shape is more suitable for the situation that the beam is in the middle of the space, and the beam height of this type of house can be used to hang the ceiling if the floor height is sufficient, but usually the floor height of the house type is not so high, so it is necessary to find a way to deal with the beautification of the beam, and in terms of beautifying the beam, the false beam shape is usually very good.

3. Be bold and "leave blank".

The so-called bold blank space is not to do special treatment of the beam, such a bold treatment, requires a very careful design. If the beam is at the boundary of the space, the top beam and the wall below are painted with latex paint of different colors to make the space appear more layered. For the space with a large floor height, the beam that is not directly treated is actually quite generous.

There are beams in the living room, it is best to make a special-shaped ceiling, if the beams are wrapped, the home is a little low,

At present, many commercial houses are high-rise, duplex, duplex or villa. Because of the architectural requirements, these houses have a particularly large number of beams and are particularly wide. When encountering such a house, a suspended ceiling is essential.

Now, we prefer to make a ceiling where there are beams and hide the beams inside. If the beam can be knocked down, it will be knocked down; If not, try to hide or weaken the vision to achieve an aesthetic effect. The canopy beams are too low, which makes people feel oppressive, so they have to go with the flow.

However, I don't know what it actually looks like.

If the height can keep the space under the ceiling at 3 meters to meters, it will still look good to hang! At present, many commercial houses are high-rise, duplex, duplex or villa. Because of the architectural requirements, these houses have a particularly large number of beams and are particularly wide.

When encountering such a house, a suspended ceiling is essential. One side of the beam can be lowered to the same height as the beam, and then the ground corresponding to the lowered roof can be raised to make a corresponding area, which is ideal for larger living rooms. If the beam is not more than 20cm, it is best to match the hanging edge top, so that the lower mouth of the beam is only 3-4cm, and the beam will not be obvious.

If the beams in the living room can't be knocked off, they can be shaped. It can be made into a Mediterranean arc or a Chinese arc. The cost of both is not very high, and it is enough to make plaster molds on both sides and connect them in the middle.

Pay attention to the direction when choosing furniture placement. When setting the bed, avoid the beam, or place the bed in the direction of the beam. Feng Shui is better.

Make the ceiling around the living room thicker and the middle part thinner, so that two completely different levels are formed, so that the ceiling can be designed in different styles, with both modern and traditional flavors.

The beam of light in this living room is in the background of the TV. In fact, there are many ways to get rid of it. The first can be sealed with plasterboard to completely hide the beams, and the others can be hidden as cabinets.

Look at the dimensions of the beam to determine the ceiling plan. One way is to use the ceiling shape to directly shield and seal the beams or wrap them inside the ceiling. The other is to use the beams as part of the ceiling shape to design some styling decorations.

If the living room space is highly sufficient, you can choose a variety of forms such as fiberglass board ceilings, plywood ceilings, and gypsum sound-absorbing ceilings. These ceilings are not only aesthetically pleasing, but also have the ability to reduce noise.

If there are such beams, then there is no need to make a suspended ceiling, the effect may not be particularly good, and it will make the house look more cramped. You can walk a gypsum line around the perimeter of the house, which can have a better decoration effect and will also make the house look layered.

I think you can use a suspended ceiling to hide it, you can do a flat top, and then go with a design with no main light.

It can be decorated with suspended ceilings. Transparent reflective materials can be used appropriately for packaging, which will be very atmospheric.

The living room is an area with a large area for home decoration, and it is also the façade of the home, so everyone attaches more importance to it. However, some friends reacted that there were beams in the living room at home, and I didn't know what to do. So how to hang the ceiling in the living room with a beam?

First of all, if the position of the beam is obvious, but the depth is not large, you can use an arc to decorate the beam to cover it and make the lines smoother; secondly, the irregular ceiling is used to blur the beam to make the ceiling more beautiful; Finally, several false beams parallel to the beam can be designed to form a personalized ceiling with light sources.

What are the common ceiling materials:

1. PVC plastic gusset.

PVC board is a common ceiling material, often used in kitchen and bathroom space, not only light texture, but also rich in color and pattern. At the same time** cheap. However, when choosing, it is necessary to pay attention to whether there are cracks on the surface of the material.

2. Aluminum buckle plate.

Aluminum gusset is a new type of ceiling material, which not only has the characteristics of fireproof and waterproof, but also has a long service life. The aluminum gusset on the market is divided into a variety of paint boards, roller coated boards and laminated boards. Lacquered boards are prone to discoloration and are not used for a long time.

Although there is no color difference, the use time is medium. The laminated board has a long service life and is not easy to sink and change color.

3. Gypsum board ceiling.

Gypsum board is also a common ceiling material, not only beautiful and generous, but also good sound absorption, at the same time, gypsum board has strong plasticity, can carve out a variety of patterns according to the needs of the owner. However, when the gypsum board ceiling is suspended, it should be noted that the design pattern should be consistent with the interior style, otherwise it will appear incongruous. In addition, gypsum board has poor moisture resistance, and it will turn yellow and discolored after being used for a long time.

Summary: The above is for you to introduce the living room has a beam how to ceiling and common ceiling materials what are the relevant content of the slag song, I hope to help friends in need, if you need to know more about the relevant knowledge in the later stage, welcome to pay attention to Qeeka Home information.

1. Nowadays, many commercial houses are high-rise, duplex, duplex or villas, because of the requirements of the building, the beams of these houses are particularly large and wide. When encountering such a house, suspended ceilings are indispensable. The general practice is to make a suspended ceiling where there are beams in Rotten Husen and hide the beams inside.

2. You can lower one side of the beam to the same level as the beam, and then raise the ground corresponding to the top to make a corresponding area, which is very suitable for a relatively large living room.

3. If the beam is not more than 20 cm, it is best to match it with a hanging edge top, so that the lower mouth of the beam is only 3-4 cm, and the beam will not be obvious.

4. The main point of the ceiling of the room with beams is to make the original beams and pipes of the building invisible, and the other point is to make the space height tend to be the same. There are inappropriate primary and secondary beams on the top surface of the living room, and we must find a way to design, resolve and decorate.

5. If the balcony is changed into a part of the hall, there will be a beam between the hall and the balcony ceiling, and the simple way to do it is to hang the flat roof at the bottom of the beam outwards to make people feel the hidden beam, which looks very smooth, and can also solve the problem of the curtain box disappearing.

6. There will be beams between the living room and the dining room under normal circumstances, and the ceiling decoration can be considered in the dining room. In bathrooms and kitchens, ceilings should generally be suspended, and these places generally have pipes and the space plane is very small.

Or you can go to the ID home to see the 3D panoramic renderings, which is more intuitive.

In the process of home renovation, many homeowners will face the problem of the center beam of the living room, which is not only frustrating, but also affects the effect of home improvement. Many homeowners feel very distressed during the renovation period. So,Suspended ceiling for the living room with beamsHow to deal with it?

Suspended ceiling for the living room with beamsWhat should I pay attention to when decorating?

Suspended ceiling for the living room with beamsHow to deal with it? Many beams can be partially decorated with ceilings, but many owners reject ceilings because some owners feel that the ceiling will increase the cost of renovation and reduce the floor height, which is frustrating. However, in fact, only the general roof will reduce the height of the house according to the height of the beams, and most of the roofs of the decorative beams are only partial roofs, so the owner you should not worry too much about the height of the house.

Suspended ceiling for the living room with beamsSuspended ceiling for the living room with beamsHow to deal with it? If the thickness of the beam is relatively small, the beam can cover part of the roof or artistic shape. For beams close to the wall, you can lift the beam directly so that the beam becomes a step, and the rest of the upper corners can be modified by plaster lines or ceilings.

Suspended ceiling for the living room with beamsHow to deal with it? Some rooms near the door will also have beams, and if the space in the room allows, you can customize a set of cabinets for the walls according to the height of the beams, and you can expect to customize it in an open wardrobe so as not to only cover the defects of the beams and also increase the storage space of the house.

5. In order to avoid the ceiling caused by the height of the room being too low, there may be some form, which weakens the beam and makes people feel like they are pressing. If the beam is wide and deep, some progressive layers can be formed around the beam that weaken the beam effect, creating a unique shape that is not the beam.

6. Most beams are used to support the weight in the building design. In general, they appear between two large houses, so you can make a porch, an arch, a partition, etc. On the beam, then you can make full use of the line to decorate the beam.

1. In the process of decorating the living room, there will be no problem of pressing the beam. This is a phenomenon that is simply not allowed in the structure of the living room. Otherwise, it causes a lot of oppression and it looks like the living room is small.

If you have beams in your living room, you can use a roof covering, or use beams as a dividing line to divide two different areas.

2. When designing the living room, the room should be decorated with a bright and spacious feeling, which is a very important factor in the decoration of the living room, which can not only visually expand the space of the living room, but also make people look more vivid.

You can get it for free