How does the automatic flush toilet sense?

There's an infrared sensor on the wall that he can sense if you come along.

Ann has a sensor that works whenever an object reaches its sensing zone and leaves it.

There's infrared

You stand up and cut off its infrared.

Summary. There are 7 buttons on the operation panel of the smart toilet, which are power, drying, female washing, massage, and stop buttons, each of which corresponds to an indicator light, which can correspond to energy saving, water heating, seat heating, toilet flushing and human body induction. When operating, just plug in the power supply and select the corresponding function.

Press the [Flush] button on the remote control, and the toilet will pick up the flush function. However, when the toilet performs the automatic flushing function, the human body must be seated for more than 6 seconds, and the automatic flushing function will be withdrawn after the human body induction is canceled.

After the human body is seated, press the [Auto Run] button on the remote control, and the toilet will first wash the buttocks for 1 minute, and then warm air drying for 3 minutes before it will automatically stop. When no one is seated, press the [Auto Run] button, and the toilet will not perform any functions.

The smart toilet also has some additional functions, such as: it can turn on the automatic deodorization function 3 seconds after sitting down, and stop 30 seconds after the human body leaves the seat.

The smart toilet foot sensor is pressed in or out.

Can the smart toilet feel the foot also press the water with the foot, and the smart toilet can only sit inductively.

The foot sensor on the side can be pressed, but I don't know if I want to press it when I use it correctly.

There are 7 buttons on the operation panel of the smart toilet, which are power, drying, female washing, massage, and stop buttons, each of which corresponds to an indicator light, which can correspond to energy saving, water heating, seat heating, toilet flushing and human body induction. When operating, just plug in the power supply and select the corresponding function. 2.

Press the [Flush] button on the remote control, and the toilet will pick up the flush function. However, when the toilet bowl performs the automatic flushing function, the human body must be seated for more than 6 seconds, and the automatic flushing and hole function will be withdrawn after the noise liquid is eliminated by the human body. 3.

After the human body is seated, press the [Automatic Running Without Items] button on the remote control, and the toilet will first wash the buttocks for 1 minute, and then warm air drying for 3 minutes before it will automatically stop. When no one is seated, press the [Auto Run] button, and the toilet will not perform any functions. 4.

The smart toilet also has some additional functions, such as: it can turn on the automatic deodorization function 3 seconds after sitting down, and stop 30 seconds after the human body leaves the seat.

Nowadays, many people buy induction toilets at home, and the sense of technology and intelligence of induction toilets are becoming more and more advanced, because of this, many people do not know how to use them. For example, how should the induction toilet be flushed, and what are the advantages of the induction toilet? If you want to know more, you may wish to take a look.

1. How to flush the induction toilet.

1. If it is with the function of automatic flushing, it has an infrared induction device, which means that there is no need to flush the toilet manually. The sensor toilet can sense the temperature of the human body, generally speaking, the temperature of the human body is about 37 degrees. After using the toilet, when the person is within the range of the switch, it can sense it, so that it will automatically flush the water.

In some public places, we will see that some toilets are also set up with this mode, which does not need to be manually pressed the button or the foot button that is pressed on it, as long as it leaves after use, it will automatically flush.

2. If the induction toilet fails and cannot be flushed automatically, we can also use its remote control or the flush button next to the toilet through the manual flushing mode, and the flushing can be successfully done with a little touch.

Second, other functions of the induction toilet.

1. Many people use an induction toilet with an advantage, that is, you don't need to open or close the lid manually. Many people do not wash their hands after using the toilet, so he is also reluctant to touch the lid of the toilet, and the sensor toilet has such a function, it can automatically flip the cover, and only the seller can open it with a slight approach. After using it, it can be automatically turned off, and it will be automatically flushed, and you can use your feet to make a gesture under it, so it is very intelligent, and it is very practical and intimate for some people with bad legs or pregnant women.

2. The seat ring has the function of heating, many people are afraid to sit on the toilet in winter, because the toilet cushion is relatively cold, but the induction toilet can automatically heat up in a short period of time, reaching about 38 degrees, the user will feel very comfortable, but not hot.

3. It can also sterilize, we all know that the toilet is very dirty, and after each use or flushing, the toilet can sterilize itself to prevent bacterial breeding.

The function of the induction toilet is indeed very powerful, of course, only to list these points. If you buy an induction toilet, Acer can give full play to its automatic flushing function.

There is an infrared induction device inside the induction toilet, when the human body is close to the induction toilet, the infrared induction device inside it will send out a flushing instruction, and when the human body leaves the baffle, the induction toilet will automatically flush, so that the induction automatic flushing is realized.

The glaze of smart toilets is divided into easy-to-clean glaze, microcrystalline glaze, anti-stain glaze and ordinary glaze. These functional touch-to-beat glazes are relatively better than ordinary glazes, easier to clean, and less prone to staining. The built-in filter of the smart toilet is used to filter the water coming out of the nozzle.

It will be better to choose a smart toilet with a filter to filter sediment and impurities in the water, and the number of rows will be more secure and hygienic to use.

The bathroom space is relatively humid, so be sure to pay attention to the waterproof level of the smart toilet. There are a total of 8 levels of IPX waterproofing, ranging from IPX-1 to IPX-8. The waterproof level of the smart toilet is IPX4, and the waterproof level of IPX4 refers to the splash-proof type, and the body can accept water splashes in all directions.

Precautions for the use of induction toilets

1. Do not rinse directly with water

Since the induction toilet is connected to the power supply, it should not be flushed directly with water when cleaning, so as not to cause damage to its internal parts, and even problems such as water ingress and electricity leakage. When cleaning, it is recommended to wipe it, but do not use strong acid and alkaline detergents to avoid damage to the induction toilet.

2. Standardize the correct use

In use, you need to follow its instructions to operate, not to press the button at will, let alone dismantle it at will, so as not to reduce its sealing and affect its performance.

Dear, if your sensor toilet keeps flushing, follow these steps to solve the problem:1Check that the induction coil is clean:

If the induction coil or sensor is contaminated or has obstructions, it may cause the toilet to drain all the time. You can make the induction coils with a clean cloth or cotton swab and gently wipe the induction coils or inductors to ensure they are clean. 2.

Check the inside of the tank: Check if there are any leaks or broken parts inside the tank, and if there are, you need to replace the corresponding parts. 3.

Adjust the water level: You can adjust the water level rod to the correct position and make sure the water level is within the right range. You can find the toilet's instruction manual to learn how to make adjustments.

4.Replace the valve or fill valve: If none of the above methods solve the problem, you may need to replace the valve or fill valve of your toilet.

This requires you to check the condition of the toilet bowl and may require the help of a professional. Please note that if you are not sure how to solve this problem, please contact a professional toilet repairer to come to the rental office for help and guidance.

Hello, the pro-sensor toilet keeps flushing, it is the sensor device that is faulty, rotten or the internal parts of the water tank are damaged. You can try the following methods to troubleshoot:1

Check the sensor for dust or dirt that needs to be cleaned. Such as absolute 2Check whether the parts inside the tank are damaged, such as whether the float inside the tank is stuck or damaged and needs to be replaced.

3.Check if the water level inside the tank is normal, if the water level is too high, it may be because the water valve is faulty and needs to be replaced. 4.

Turn off the toilet inlet valve and ask a professional maintenance person to repair it. If none of the above methods can solve the problem, it is recommended that you contact a professional maintenance personnel for overhaul and repair.

Dear, hello, I have found the result for you; There are the following solutions for the sensor toilet to be flushed all the time:1: Check the sensor sensor:

First, check the sensor section on the sensor toilet for any buildup of debris or dirt. Use a cleaning cloth to gently wipe the sensor to make sure its surface is clean and unobstructed. 2：

Reboot the system: Some sensor toilet devices have a system reboot function. You can look for the restart button on your device or disconnect it, wait a while, and then reconnect it to see if that resolves the issue.

3: Check the water valve: Confirm that the water valve of the induction toilet is completely closed.

The water valve may be faulty or clogged, causing water to flow into the toilet bowl continuously. Make sure the water valve is in the correct closed position. 4：

Check the flush valve: There may be a problem with the sensor toilet's flush valve holding the water bottle, causing it to continue flushing. Please check if the flush valve is stuck or damaged.

If you find a problem, you may need to talk more about changing the flush valve. 5: Unplug or power off:

If none of the above works, you can try unplugging the induction toilet or turning off the power switch to stop the flushing. Then, contact the relevant repair service provider or professional for further help and support. Please note that when dealing with induction toilet malfunction, Wu Yuanqing must be careful and ensure his own safety <>