The flush toilet is unblocked and blocked, what are the ways to repair it

1. Sometimes it's just a temporary blockage, the blockage is not very bad, at this time, flush more water, it will pass, if it is a soluble or scattered thing such as soil and paper, you can flush some hot water.

2. You can buy some caustic soda, boil some boiling water to melt the caustic soda, pour it into the toilet, and wait for ten minutes to flush the water once to dredge.

3. Use a special soft hook for dredging pipes, put the soft hook into the toilet to hook out the blockage, and flush it with water.

4. If there are many blockages in the toilet, you can try to find a hose, poke the blockage hard, stir up the blockage, and then flush the blockage down.

5. Use special tools to dredge the toilet.

6. Find a mop, first fill the toilet with water, don't let the water come out, keep lifting it up and then poking it down, the amplitude is not too large, but the action should be strong and fast.

7. Find a stick, wrap the cloth around one end of the stick, wrap the cloth into a ball or column, then wrap a clinker bag on the cloth, and then poke the blocked mouth down.

8. If the toilet is blocked by sediment or hard objects, you can only find a steel wire that can be bent, stretch into the inside of the toilet, and slowly evacuate the sediment.

9. Use the fast water flow to dredge the toilet, find a clinker water pipe, connect the faucet at one end, insert the toilet mouth at the other end, then cover the main toilet, open the faucet, and use the fast water flow to flush away the blockage.

The toilet is clogged and can't be flushed, teach you a trick, dredge it quickly, and don't cost a penny.

A toilet plug or toilet plug is the most common tool that comes to mind, and it is also the work that many people will prepare at home. This tool is indeed the first choice, as it can be done 90% of the time.

If you can't unclog the toilet with a wrench, you can go to the kitchen and get some dish soap and squeeze some of it out into the toilet. Wait about 5 to 10 minutes so they have time to move from the sewer to the blockage.

If the toilet is not only clogged, but also full of water, another option can be used. Start by emptying the water inside, but keep some of it. Subsequently, pour a cup of baking soda and a cup of vinegar into the toilet drain.

When vinegar and baking soda are combined, the lead stool's self-destructive chemical reaction bubbles up and loosens the blockage. After about half an hour, pour some more hot water into it and see if it drains.

If you don't have a wedge at home, you can also try using a plastic water bottle to unclog it. But considering that plastic water bottles are generally not that long, you should wear a rubber glove first. First, remove as much water as you can from the flush toilet.

Fill a large plastic bottle with warm water. Place your thumb on top and place the top of the bottle into the outlet at the bottom of the toilet. Remove your thumb and hold the bottle tightly with both hands.

Squeeze the bottle and let the water drain into the toilet drain. The pressure created in this way may clear the blockage. When doing so, it is best to wear a mask and goggles to protect against splashing water.

Then pour hot water into the toilet, and if the water level drops, the blockage has been cleared.

The method is as follows: 1. If the toilet is blocked by a large number of hard objects, it is best to hook out the object with a wire.

2. Using an appropriate amount of oxalic acid to clean the toilet can also make the toilet smoother.

3. If the toilet is seriously blocked, the water can't go down, you can try the caustic soda method to dredge, use a kettle to melt the caustic soda and pour it into the toilet, and wait for one or twenty minutes after the toilet itself will become very smooth.

4. You can use an old-fashioned mop, the kind with a round head. Fill the toilet bowl with a hail of water and press it hard with a mop a few times, moving quickly, using atmospheric pressure to get it through. This is the toilet plug we bought outside.

5. You can also use a frying pan or jar to draw water from other water sources, and pass through the suction cup of the hand pressure bowl pump. There are two types of hand-pressed bowl pumps, the one with a spherical head is particularly effective at unclogging flush toilets, and some hand-pressed bowl pumps are designed specifically for flush toilets with folding heads.

Flush toilet unclogging method:

1. Hand pressure pump for leather bowl.

If the toilet at home is blocked, you can use the leather bowl hand pressure pump to dredge the toilet, the leather bowl hand pressure pump has an adsorption effect, you can use the leather bowl hand pressure pump to aim at the toilet opening, and then pump the leather bowl hand pressure pump or rubber suction cup up and down, but it should be noted that before using the leather bowl hand pressure pump or rubber suction cup, it is necessary to ensure that there is enough water in the toilet bowl to cover the suction cup.

2. Wire hangers.

The wire hanger is mainly used to block the toilet with hard objects, fabrics or insoluble paper towels, and the wire hanger can be used to hook the blockage and hook out the garbage.

3. Toilet pig.

The toilet pig can guide the through strip and the hook that comes with the pig into the elbow of the toilet, and use the crank at the end to roll the hook in the drain or elbow, and wait until it feels that the crank is difficult to roll, indicating that the through bar has now extended into the obstruction, and it can be pulled out.

4. Remove the flush toilet.

If you've tried all the best ways to get started and still can't unblock the flush toilet, then you may need to remove the toilet from the floor and turn it upside down to create a blockage. Of course, this is a last resort, so before using the method of dismantling the flush toilet, it is still necessary to try a simpler method.

5. Dredging the toilet.

You can go to the market to buy toilet spirit dredging, this toilet spirit is corrosive, can corrode the debris in the toilet bowl, but when using, you should first pour hot water into the toilet bowl, and then pour the toilet spirit, wait for a few hours and then use the leather bowl hand to dredge.

There are several ways to unclog a clogged toilet:

1. Plastic wrap:

First of all, cover the surface of the toilet bowl with plastic wrap and try to form a film layer with better sealing. Then, press the flush button of the toilet, if the sealing is good, you will see the plastic wrap layer bulging, if it is not good, it will not bulge, so try to seal it well. Finally: press the plastic wrap with the palm of your hand, press down hard, be careful not to press through the plastic wrap, and press a few more times, there is a high probability that you can dredge the toilet.

2. Water plucking dredging method:

Before using the water puller, you should fill the toilet with water, and the water will have a stronger impact, and then you can press the water pull on the drain, press it a few more times, and if you hear a bang, it has been dredged, if not, continue to press until it is dredged.

3. Water pipe impact dredging method:

You can find a soft water pipe that you don't need, connect one end to the faucet, and stuff the other end into the drain of the toilet, and then seal the toilet lid or other things as much as possible to prevent the water from splashing out. Next, you can turn on the faucet and use the impact of the water to the maximum to flush the blockage to complete the dredging.

Toilet selection tips

From a practical point of view, the toilet bowl should first have the basic function of flushing thoroughly. Therefore, the flushing method is very important, and the toilet flush is straight flush, rotary siphon, vortex siphon, and jet siphon. Pay attention to the different drainage methods:

The toilet pressing method can be divided into flush type, siphon flush type and siphon whirlpool type.

The amount of flush and siphon flush irrigation is about 6 liters, and the sewage discharge capacity is strong, but the sound is loud when flushing; The whirlpool type uses a lot of water at a time, but it has a good mute effect. Consumers may wish to try the straight-flush siphon toilet, which has the advantages of both direct flushing and siphoning, which can not only quickly flush away dirt, but also play a role in saving water.

The toilet is clogged and the tricks are as follows:

1. There are many times when the toilet is clogged due to the accumulation of toilet paper and other debris, you can try to pour hot water into the toilet, which can dissolve part of the blockage.

2. You can pour the caustic soda solution into the toilet, it will have a chemical reaction with the blockage in the toilet, and start to continuously fill the toilet bowl with water five minutes after pouring the solution.

3. When the flush toilet is blocked, you can also use the toilet dredge to improve this problem, and the blocked foreign body will often be sucked out after repeated operation, and it is recommended to clean it out of the toilet every time a part of the foreign body is sucked out.

4. If the toilet is blocked by a hard object, then it needs to be taken out with a steel wire with a hook, so as to achieve the dredging effect, in this case, the toilet dredge is more difficult, if this method does not work, then you need to find a professional to repair.

5. Prepare a cylinder to wrap rags around it, and then pour some water into it to start pumping, so that you can dredge the clogged flush toilet.

6. Buy a soft hook specially used to dredge pipes, and then reach into the toilet bowl to hook up the blockage, so that the toilet can be dredged.

7. Buy pipeline dredging agent in the supermarket, divide the dredging agent into 3 times, with an interval of 3 minutes each time, about 50 grams, and wait for all the input to stay for three minutes to flush into the hot water, and then stay for 10 minutes to rinse with clean water, so that the flush toilet can be dredged.