What should I do if the pickup truck doesn t catch fire? There is electricity, but it seems to be a

If it's an old car and a second country, you can find a few people to push the cart, and the speed is fast and it's in gear, pushing. After the third country, you need to give enough electricity to let the engine reach a certain speed. You can call the repair shop to bring the battery over and troubleshoot the problem.

There are two situations in this case, one is caused by the loss of the battery, which needs to be replaced in time or the circuit is checked, and it may be caused by serious carbon deposition in the engine.

I don't think your small truck can catch fire, that is to say, there is indeed no electricity, the power is insufficient, I think this time should be charged with a charger, and when charging should be charged for a period of time, I think the power group is of course particularly good when the ignition. I think that as a small truck, you should put it in the electrician's group, otherwise it will be very dangerous if the car starts on a half-slope and comes back, so you think you should make sure that the car is safe before it can operate normally. Therefore, when doing something, you should still prepare in advance, and since you find something wrong with the car, you should not take it lightly.

Hello Like you said, this situation may be that the battery is losing power, use the battery meter to detect the voltage when taking a taxi, if it is less than nine negative, it means that the battery is insufficient and needs to be charged.

Hello, is the voltage not big enough, it is recommended to find a car to connect to see the start. If it is caused by battery feeding, it is recommended to replace the battery.

Hello, this should be the battery is out of power, you can use a multimeter to measure the voltage of the battery at the moment of starting.

Check whether there is oil in the fuel injector of the oil pump to see if the spark plug has a high-pressure fire, which is generally these problems.

Hello in this case, it is recommended to check the voltage of the battery first. If the voltage is normal, it is best to maintain the starter.

In this case, a multimeter is needed to detect the battery voltage, and the voltage is more when there is a negative, and the voltage generated by the start of the truck is Shun.

If the car ignition does not respond, and the dashboard fault light is on, it means that the car battery power loss cannot be ignited, and the battery power should be normal at more than 12V.

Hello, that is the battery loss of power,

There are many reasons why the truck cannot catch fire when it has electricity or oil. It can be roughly divided into two categories of reasons: one is that the car itself is fine, but it cannot be ignited due to objective factors. The other is that there is a problem with the car itself.

Due to objective factors, the more common reason is the steering wheel.

Locked. The steering wheel is locked, which is an anti-theft function.

In this case, the reason is that the steering wheel was turned after the vehicle was turned off, and the car failed Wang Jing's computer thought that the vehicle was stolen and automatically activated the anti-theft function.

Solution: Turn the steering wheel while twisting the car key to start. Try to push as hard as you can when turning the steering wheel, and try a few more times if it doesn't work once.

If there is a problem with the car itself, there may be more reasons involved. For example, if there is a problem with any part of the intake system, exhaust system, ignition system, and fuel system, it may cause failure to ignite.

For example, spark plugs in ignition systems.

There is a problem (spark plug life has reached the limit, the gap between the spark plug electrodes is too large, etc.).

Since you can't see the actual car, you can't make an accurate judgment without careful treatment. The specific cause needs to be examined by professionals to determine, and only by determining where the problem is can the symptoms be repaired.

The large truck has electricity and gas, and it does not catch fire, which may be a problem with the igniter.

If it can't be started after parking overnight, it should be that the battery can't be started, and it's time to replace the branches.

You can start the two-car connection stool Zen, and then find a place to repair; Or directly call the "battery replacement" service.

This problem to find a service station, that is, just talk about the theory you yourself will not fight to repair it, what brand of trucks, what service station to find, you can find it on the Internet, or there is a service station based on the booklet, which is available all over the country. Not in the insurance, the ridge may have to pay for it.

The solution to the car is as follows:

1. Start with fire.

Remove the buckle of the battery box to open the battery protective cover, revealing the positive and negative poles of the battery. Take a tie wire, one end is connected to the positive pole of the dead battery, and the other end is connected to the positive pole of the electric battery.

Take another tie wire, first connect the negative pole with the electric battery, and then connect the other end to the negative pole of the non-electric vehicle. If it is a battery within the normal lifespan, after being successfully connected to find a car, it will have to drive continuously for more than half an hour, and basically it can be restored to normal use.

Or use the car emergency starting power supply: when using, clamp the positive and negative poles corresponding to the battery clamp on the terminal post of the battery, and then start the power switch to make the power supply in the connected state, and start the rescued vehicle in the next step.

2. Find an auto repair shop or insurance company for rescue.

If you don't have a companion vehicle to catch fire, you can also find an auto repair shop for rescue. Auto repair shops generally have special batteries for rescue, but this is charged according to the distance. Generally, it ranges from tens to 200 yuan.

If the insurance company you bought insurance has free roadside assistance, you can also call ** for help.

3. It is not recommended to replace the battery immediately after the power is successfully started through the above methods.

If the car does not catch fire, the repair shop will come over with the battery to catch fire, and replace the battery with a new one after the start is successful. If you don't understand the reason for the battery loss, you can replace the battery, and you won't be able to do it. Generally, after the battery is lost, you must check the reason, if there is leakage or generator failure, even if you replace the new battery, it will be quickly exhausted.

If it is confirmed that it is a problem with the battery, then consider replacing the battery.

1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it.

2. Emergency power supply: This is a new type of power bank like a thing, there are two kinds of lead-acid and polymer lithium battery, which can help the vehicle with a loss of power to start, and can also have lighting, charging mobile phones and multi-functional supplies used with an inflatable pump to inflate the car. And it is generally portable, very lightweight, if you have it, you don't have to ask others for help.

Be sure to charge it in time after use and keep it full of power to deal with emergencies.

3. Positive, first connect the positive: first turn off all the electrical equipment on the car, make the key in the OFF position, open the cabin cover to find the battery, there are positive and negative poles written on the battery, generally the red "+" sign is the positive pole, and there are generally two wires, at this time, take out the red one, open the battery cover, pinch the clamp on the head to clamp firmly the positive pole of the battery of the electric car, and the clamp at the other end to clamp the positive pole of the battery of the rescue vehicle. Be sure to connect the positive electrode first, then the negative electrode, do not reverse the order, and do not use the battery clamp to touch anywhere except the battery pile head.

4. Negative connection, negative connection: After the red positive electrode is connected, take out another wire, first clamp the negative pole of the tram battery, the negative electrode is generally black "—" number, and then pinch the other end of the clip, from beginning to end the clip do not touch other places, to clamp the negative pole of the rescue vehicle battery, when the connection will pop out of the electric spark, please don't be afraid, this also shows that you are right. The reason why the negative electrode is not connected first is because the whole vehicle is basically a negative electrode (that is, commonly known as "tie iron"), if the negative electrode is connected first, when connecting the positive electrode, the clip will cause a short circuit and burn the parts on the car when it touches any conductive place in the body.

5. After starting the vehicle, first remove the negative, and then dismantle the positive: after the battery is connected, the rescue vehicle will first ignite and charge the battery, and then the no tram enters the vehicle to open the key, at this time the instrument light will be lit smoothly, and then try to ignite (not more than 5 seconds), if it fails to start smoothly, step on the accelerator of the rescue vehicle, and the speed is kept at about 2500 rpm, and then the tram is ignited again, if the starter is no problem, the car has oil in the case of general can be started smoothly, after the non-electric vehicle starts, Remove the negative clamp first, then remove the positive clamp, for the same reason as why the negative pole is followed by the fourth one.

The positive and negative poles of the battery must not be reversed, and the order of assembly and disassembly should be strictly in accordance with the order of first connecting the positive and then the negative, and the first dismantling and then the positive.

When the open-circuit voltage of the truck battery is lower and the load voltage is lower, it will be difficult for the vehicle to start.

When the engine is not started, the battery supplies power to the electronic devices of the whole car, and the battery is also responsible for starting the engine.

When starting the engine, the fuel supply system, ignition system, and starter all need to run, and the operation of these systems is inseparable from electricity, and if there is no battery, the engine cannot be started.

After starting the engine, the engine will drive the generator to run, the generator can supply power to the electronic equipment when it is running, and it can charge the battery, when charging or discharging, the ions in the battery will move in the electrolyte, and some ions will chemically react with the electrolyte when they move in the electrolyte.

Battery maintenance. The battery is most afraid of low temperatures, and in a low temperature environment, the battery capacitance is much lower than that at room temperature. Therefore, we should check and maintain it in time, and pay attention to it in daily life:

1. Avoid parking the car in the open-air parking lot for a long time, if it is parked for a long time, the battery must be removed and taken away to prevent the battery from being damaged by icing.

2. The car engine is not easy to start in winter, and the time to start the car each time should not exceed 5 seconds, and the interval between starting again should not be less than 15 seconds. In the case that the ignition is still not ignited after multiple starts, the cause should be found from other aspects such as the circuit, ignition coil or oil circuit. Avoid multiple uninterrupted starts, which can cause the battery to burn out due to over-discharge.

3. The car battery should be charged frequently, and the battery will slowly discharge itself until it is scrapped after not being used for a long time, so the car should be started every once in a while to charge the battery.

4. Clean the binding post of the battery every once in a while, and apply special grease to protect the wiring harness. Always check the accessories and connections on the battery.

When the battery voltage is below 12V, it is difficult to start the engine.

The battery is an important part of the car, when the engine is not started, the battery is responsible for supplying power to the electronic equipment of the whole car, and the battery is also responsible for starting the engine. After starting the engine, it is the generator that supplies power to the electronic equipment of the whole car.

When starting the engine, the starter, the fuel supply system, the ignition system all need to work, and the operation of these systems cannot be separated from electricity. If there is no electricity, the engine cannot start.

After starting the engine, the engine will drive the generator to run, at which point the generator can charge the battery, and the generator can supply power to the electronic equipment of the whole car.

Truck battery voltage:

It's basically 12 volts. The voltage of the lead-acid battery is between volts, and the median value is 2 volts, so there are actually 6 lead-acid battery cells working together inside the lead-acid battery for vehicles, and a voltage of 12 volts can be obtained after series connection. When the battery is fully charged, the chemical reaction is violent when discharging, and the voltage of the monomer is up to volt, and the 6 monomers are connected in series.

The chemical reaction terminates at volts, so when the battery voltage approaches 9 volts, it is about to run out of charge. That is to say, although the nominal voltage of the vehicle battery is 12 volts, the actual voltage is between volts, and the higher the voltage in this range, the more sufficient the power.

Below 11 volts.

When the voltage of the battery is lower than 12V, it will cause the car to fail to start and have difficulty starting. The battery is an important part of the car, and it is also a wearing part that needs to be replaced regularly. As the number of charging and discharging increases, the performance of the battery will also decrease, so the battery needs to be replaced regularly.

When starting the engine, the fuel supply system, ignition system, and starter all need to be operated, and the operation of these systems is inseparable from electricity.

I wish you a happy life.

Because of the objective factors affect the ignition, the common reason is that the steering wheel is locked, there is this situation, the reason is that the car turns off the steering wheel, the car computer thinks that the car is stolen, and automatically starts the anti-theft function. The solution is to turn the steering wheel and start with the car key.

If there is a problem with the car itself, there may be more reasons. For example, if there is a problem with any part of the intake system, exhaust system, ignition system, and fuel system, it may affect whether it can ignite. This type of problem needs to be detected and determined by professionals before it can be solved.