Xiaomi TV suddenly can t connect to wifi, but the mobile phone can be connected, what is the reason?

If the Mi TV or Mi Box cannot connect to the network, you can:

1.Restart your Mi TV or Mi Box;

2.Modify the input method on the TV or box and try to re-enter the password to connect to wifi, such as switching the full-width symbol;

3.Change the router encryption method to no encryption or change the wifi password;

4.Check whether the router has relevant restrictions, such as blacklists, etc., and if so, it is recommended to try after turning it off;

5.Some TVs only support,Try to change the network environment (e.g.:Connect to a mobile phoneWiFi hotspot);

6.Try to factory reset your Mi TV or Mi Box;

7.If it is still invalid, it is recommended to apply for after-sales on-site testing.

Method 1: Check the password of your Wi-Fi.

When the network is adjusted, the set-top box and TV will not be automatically updated, and the Wi-Fi password needs to be manually updated. Move outside the coverage area of the network in question, go to the Wi-Fi configuration item that needs to be adjusted, select "Adjust Network Settings", enter a new password in the window and review the password information, and finally select "Save password". So that the Wi-Fi will work properly.

Method 2: Connect with a network cable.

Smart TVs in general.

will be equipped with a network cable interface.

Compared with wireless wifi, the wired network is more stable and fast.

It's also slightly faster.

Method 3: Restart your router.

In the case of long-term work, the router may be disconnected, and you can try to restart the router and relink the wifi to link.

Method 4: Restart your TV.

Sometimes the TV will freeze for a short time, restart it to restart the TV, just like restarting the computer, and then connect to the wifi again to try.

Method 5: Check the WiFi Signal.

Sometimes distances and obstacles can block the WiFi signal, and it is its attenuation that will affect the effect of receiving the WiFi signal.

Method 6: If the above methods fail to help you, it may be that the wifi receiver in the TV is damaged, you can contact customer service for repair.

Xiaomi TV suddenly can't connect to wifi, it is often a problem with the settings of Xiaomi TV, or your router blocks Xiaomi TV, and the following connections can be refreshed.

It's possible that there's a problem with your TV's settings. You turn off the total power, wait for ten minutes, and then turn on the connection wifi to try it, will it be good to watch TV.

Summary. Dear,Hello,The TV system is unstable,It may be that the system files are conflicting,So you can't connect to the wireless router,You can consider turning off the TV first,Then turn off the router。 After that, turn the TV back on and you should be able to connect to the wireless router again to watch TV.

If you are still connected to a wireless router wirelessly, you can consider restoring the operating system of your TV. Take it.

Restore to the factory settings, and then enter the password again to connect.

If the above two methods cannot solve the problem, then you can apply for after-sales.

Xiaomi TV suddenly can't connect to wifi, but the mobile phone can be connected, what is the reason?

Dear,Hello,The TV system is unstable,It may be that the system files are conflicting,So you can't connect to the wireless router to tell your friend,You can consider turning off the TV first,Then turn off the big Jane Chong router。 After that, turn the TV back on and you should be able to connect to the wireless router again to watch TV. If you are still connected to a wireless router wirelessly, you can consider restoring the operating system of your TV.

Restore it to the factory settings, and then enter the password again to connect. If the above two methods cannot solve the problem, then you can apply for after-sales.

Hello dear, I hope mine is helpful to you, and I wish you a happy life!

It may be that the TV is too far away from the router; It could be the router's wireless network.

The setting turned off SSID broadcasting; It could be that the router is malfunctioning; It could be that there is a problem with the TV's system; It could be that the hardware of the TV is malfunctioning. Here's why:

1. The distance between the TV and the router is too far, resulting in the TV not receiving the wifi signal. Generally, moving the router closer to the TV will solve the problem.

2. The wireless network setting of the router turns off the SSID broadcast, resulting in the TV not receiving the wifi signal. Generally, the SSID broadcast of the router can be turned on to solve the problem.

3. The router is faulty, causing the TV to be unable to connect to the wifi signal. Generally, you can restart the router, or restart the router, then set the parameters of the router, and replace the router if necessary.

4. There is a problem with the system of the TV, which causes the wifi to not be received. You can usually restore your TV system to factory settings or upgrade your system to the latest version to fix the problem.

5. If the hardware failure of the TV causes the WIFI to be not received, such as the failure of the wireless network module, the failure of the WIFI antenna, the failure of the internal circuit or the motherboard and its parts, etc., you can contact the after-sales service of the TV for maintenance.

Connect with a network cable.

If the wireless connection can't be reached,You can try to plug in the TV directly with the network cable interface to connect,If it still can't,There may be a problem with the network!

Restart your TV. I don't know what to do if I encounter difficulties, restart the TV, 8 of the 10 problems can be cured, turn off the power and cut off the power, let it stand for a while and restart, re-identify the wifi signal.

Restart your router.

Generally speaking, there will be an unstable connection problem after working for a long time on an inferior router, and it is also possible to shut down and restart the router, and you can test whether the wifi signal is stable through your mobile phone.

Check the gateway and DNS

If it still can't be in the future, try to check whether the wireless network gateway and DNS are normal, it is recommended to set it to automatic acquisition, and then restart the TV.

Distance. If you have a wealthy house, it may be a problem with the distance, and the signal penetration is weak, so you can try to shorten the distance between the router and the TV.

Upgrade the system. It could be a system issue, you can check the version to upgrade to the latest system, usually some minor issues are fixed.

Repair TV to find geeks to repair, leading and trustworthy in the industry.

The first socks when Xiaomi TV is connected to Huai buried wifi,Only the display of saved but unable to connect is caused by the connection error of the lead celery worm,The solution is:

1. First open the settings in the TV.

2. Find the system option in the settings list.

3. Then open the network settings in the options.

<>5. Finally, select the wifi that needs to be connected.

6. Click Next, so that the wifi connection is successful.

Hello dear,The wireless network is normal but the Xiaomi TV can't be connected can be divided into two parts for troubleshooting:1、Check the network itself: Change the router encryption method to none(No encryption),Try to connect,If you can connect normally,You can reset the password and encryption method of the router(Xiaomi TV supports encryption:

wep, wpa, wpa2), try to reconnect the TV; If the method does not work, please check whether the router is set to MAC address login restriction, if there is a corresponding restriction, please modify the router settings, or directly reset the route and then try to connect; You can also use your mobile phone to set up a wifi hotspot,Use Xiaomi TV to connect to a wifi hotspot,See if you can connect it,If you can connect, it means that there may be a problem with the router device,Change the routing attempt。 2、Mi TV checking: Check whether the password is entered correctly; Restart your Mi TV and reconnect to wifi; Modify the input method of the TV and try to re-enter the password to connect to wifi; Note:

If you are using an input method when entering the wifi password, you need to click on the keyboard punctuation option (the option name is "? 12" these 3 characters) interface "turn the page" to find the half-width symbol, if you don't turn the page, you will enter the full-width symbol will cause the password to mismatch (such as a question mark? ）。

Factory reset your Mi TV.

Check whether other networked devices on the same router are working properly and check the network environment at home. If the network environment is normal and you still can't connect, it is recommended to connect the TV to a mobile phone hotspot to test whether you can surf the Internet normally. If the connection to the phone hotspot is still not normal, you can try to factory reset the TV.

Mi TV. Can't connect to Wi-Fi? The solution is as follows:

Take Xiaomi Mi TV 4A as an example, the system version is MIUI TV ,1Check whether other networked devices on the same router are working properly and check the network environment at home.

2.If the network environment is normal and still inaccessible, it is recommended to connect the TV to the mobile phone hotspot to test whether it can access the Internet normally, if it is normal, you can try to reset the router and change the router DNS to or.

3.If the connection to the hotspot on your phone still doesn't work properly, you can try to factory reset your TV.

Note: A factory reset will erase all operations on the previous TV, including installed apps, wifi passwords, membership information, etc.