Chapter 2 System Framework 2 1 Network Architecture 2 2 System Architecture 2 3 Module Function Desc

The software test analysis report includes the content and general format:

Purpose of writing. Explain the purpose of the test analysis report and indicate the intended reading range.

Background note: athe name of the software system under test;

b.The proposer, developer, user and computing center where the software is installed indicate possible differences between the test environment and the actual operating environment and the impact of these differences on the test results.

Definitions list the definitions of the terms used in this document and the original phrases of the initials of the foreign language.

a.The approved plan or contract of the project, and the approval of the superior authority;

b.other published documents belonging to the project;

c.Documents and materials referenced throughout this document, including the software development standards to be used. List the titles, document numbers, publication dates and publishers of these documents, indicating the availability of information on these documents.

2. Summary of the test.

List the identifier of each test and its content in the form of **, indicating the difference between the actual test work carried out and the pre-designed content of the test plan, and the reasons for the change.

3 Test results and findings.

Test 1 (Identifier).

Compare the results of the dynamic output (including internally generated data output) obtained in this test with the requirements for dynamic output, and state the findings.

Test 2 (Identifier).

The test results and findings for items 2 and subsequent tests are presented in a manner similar to those described in this report.

4 Conclusions on the functionality of the software.

Function 1 (Identifier).

A brief description of the capability, describing the capabilities of the software designed to meet the capabilities and capabilities that have been proven through one or more tests.

The limits describe the range of test data values (both dynamic and static) and list the defects and limitations identified in the software during testing for this feature.

Function 2 (Identifiers).

The results of the tests for item 2 and subsequent functions are presented in a manner similar to that of this report.

5. Analyze the summary.

Capability Statement: The capabilities of the Software as verified by testing. If the test is conducted to verify the achievement of one or more specific performance requirements, a comparison between the test results and the requirements in this area should be provided, and the impact of possible differences between the test environment and the actual operating environment on the capability test should be provided.

Defects and Limitations.

State the software defects and limitations that have been tested and substantiated, describe the impact of each defect and limitation on the performance of the software, and state the cumulative and total impact of all measured performance defects.

Suggest suggestions for improvement for each defect, such as:

a Methods of modification that may be used for each modification;

b Urgency of amendments;

c Revised projected workload;

d Responsible for each amendment.

The evaluation indicates whether the development of the software has achieved the intended goals and whether it can be delivered.

6. Test resource consumption.

Summarize the resource consumption data of the test work, such as the number of horizontal levels of the staff, the consumption of machine hours, etc.

In Word, Chapter 2 "Secondary Headings under Headings" can be achieved by customizing the numbering value.

The steps of the method are as follows:

1. Open the word document you want to operate, select the relevant secondary title, right-click, and select "Set Numbering Value".

2. Check "Try to (skip value)" before checking, then enter 2 and 1 below, and click OK.

3. Return to the main document and find that in Word, the second chapter "Secondary Title under the Title" setting operation is completed.

1: Set the title 1 first, and select Multi-level Numbering Level 1 in the number (generally automatically regarded as one).

Two: press enter directly on the basis of title 1 (press enter with two words at will), this is, if title 1, the serial number is, press enter, stop, on the basis of the serial number, title 1 choose to continue to select multi-level numbering like title 1, select level 2, link level to style title 2. And so on.

Since the style of your title 1 is changed by yourself from another style, it is still possible to use title 1 to create chapter 2 or to generate it according to the first level 2 table of contents, please make sure that title 1 is the default.

Project code.,Multi-level list,There's a list.,Just the last one.,After opening, there's a new start sorting.,Cancel it.,The computer isn't around.,It's not detailed.,Can't find it and ask me again.,I hope to adopt.。

Click on the number, right-click, select Continue Numbering, and you're good to go.

Select the title--- right-click--- bullets and numbering --- customize, this position can be changed to 2.

It is highly recommended to use WPS to solve this problem, like this "Chapter 1," which is often used in Chinese writing; Chapter 2, the list structure, now has a fixed template.