What material is generally used for the appearance of the revolving door?

Material type of revolving door:

1. Metal materials. Among all kinds of engineering materials, metal materials are the most widely used. The reason why steel materials are widely used is not only because they have good mechanical properties, but also because they are relatively cheap and easy to obtain, and can meet the requirements of a variety of properties and uses.

Due to its excellent properties, alloy steel is often used in the manufacture of important parts. Stainless steel is the most widely used in automatic revolving door engineering. Among the non-ferrous metals, aluminum, copper and their alloys are the most widely used.

Among them, aluminum alloy with light weight and corrosion resistance is the most widely used in automatic revolving door engineering.

2. Polymer materials. Polymer materials usually include three types, namely plastics, rubber and synthetic fibers. Polymer materials are rich in raw materials, low density, and corrosion resistance.

Plastics and rubber have a wide range of applications in automatic revolving door engineering. Due to its good elasticity in the appropriate temperature range, rubber is mostly used as a sealing strip in automatic door engineering. The disadvantages of polymer materials are easy aging, poor flame retardancy and heat resistance.

3. Composite materials. Composites are made of two or more materials with significantly different physical and mechanical properties, and different materials can be used as the reinforcing phase and basic phase of the material, respectively. The reinforcing phase plays the role of improving the strength and stiffness of the matrix phase, while the matrix phase plays the role of qualitative of the reinforcing phase, so as to obtain excellent properties that are difficult to achieve with a single material.

There are always many occasions when the revolving door is applied. In my personal opinion, revolving doors don't do much better than look good. In fact, there are many advantages of revolving doors, so let me briefly introduce them below.

First of all, the revolving door is different from the ordinary door that is constructed on a flat surface, but adopts a three-dimensional three-dimensional structure, which visually gives people a sense of beauty. In addition to this, many people will doubt its airtightness. This is because everyone is too worried, the revolving door is always kept closed, with good airtightness, because it is open and closed at the same time.

The simultaneous existence of the double state of the revolving door gives the revolving door another advantage, that is, energy saving and heat preservation. The design concept of the revolving door is to save energy, and its structure and state perfectly solve the problem of energy saving and heat preservation.

Of course, one of the distinguishing features of the revolving door is that it blends perfectly with the interior décor, making it impeccable. <>

Revolving doors are aesthetically pleasing and can serve as a decoration and help to enhance the image of a business.

Provide ample space for people to pass through, eliminating the need to open and close doors.

It can block the wind outside and avoid the backflow phenomenon caused by high-rise buildings.

With the revolving door, only a small part of the air is exchanged between the interior and the outside, which saves heating and cooling.

The revolving door can effectively control the entry and exit of people and prevent congestion. Revolving doors also reduce energy consumption and prevent hot and cold air from entering. Keep the interior tidy and tidy, and the revolving door can effectively prevent dust from entering.

1. The revolving door is beautiful and atmospheric from the outside. Generally, star-rated hotels and high-end office buildings are used more, and the grade of the entire building can be reflected from the façade.

2. Good sealing, avoid reducing indoor energy consumption, especially when the wind is strong in winter.

3. The two-wing revolving door contains a high middle belt automatic induction door, and when the amount is large, it can be switched to the state of automatic casement induction door.

The revolving door industry has not yet had clear industry norms and standards, so the quality of the revolving door and the beam is uneven, and the general two-wing automatic revolving door is about 200,000 to 400,000 next to the old luck.

It is stainless steel, and the revolving door of our company with black mirror surface is commonly used.

The materials of the revolving door mainly include:

1. The internal structure of the revolving door adopts the structure of aluminum profile.

2. The exterior of the revolving door is mostly made of stainless steel as the outer decoration of the revolving door, and there are also fluorocarbon spraying and other processes as the external decoration of the revolving door.

What we need to pay attention to when choosing a revolving door manufacturer is the following.

1. For the scale and qualification of revolving door manufacturers, you can take a look at the previous installation cases of the manufacturers. If there are cases of installation, you will be able to focus on the quality of the product, and there will be an expectation. Of course, you can also go to the field to inspect the strength of the manufacturer.

2 penny price penny, we choose revolving door products, can not only one pursuit of cheap, if the pursuit of the lowest, in the use of raw material quality may be greatly discounted, in the choice of revolving door, I also hope that you can also consider.

3. Product quality is also a point we focus on, the first revolving door is more than hundreds of thousands to tens of thousands, the money is spent, and we also hope to be steadfast. Therefore, when choosing a state, we need to pay more attention to the materials and quality of the revolving door.

4. The effective guarantee of after-sales service is also a part of what we need to pay attention to. After the installation of the product, the timely removal of the revolving door fault is the point we are most concerned about. When there is a problem with the revolving door, the manufacturer procrastinates and cannot repair it in time, which is the last thing we want to see.

Therefore, the timely after-sales maintenance is what we need to focus on to the manufacturer.

The above points, when choosing a revolving door factory to change the home, if you can pay more attention, you can choose a revolving door product that you are satisfied with. Hopefully, these points will help you.

1.Because the revolving door is much larger than the average pop-up door, the first thing to consider is the size of the door space.

2.The main function of the revolving door is to make the building beautiful and generous, and it is generally used in public places.

Large buildings such as hotels, guesthouses, office buildings, shopping malls, banks, etc.

General public places are acceptable, such as restaurants, hotels, KTVs, bathing centers, banks, office buildings, etc.