-
Anonymous users2024-02-06Wireless bridges. As the name suggests, it is a wireless network.
It uses wireless transmission to build a bridge of communication between two or more networks; Wireless bridges are divided into circuit-based bridges and data-based bridges from the communication mechanism. The wireless transmission mechanism of the circuit bridge adopts the principle of PDH SDH microwave transmission, and the interface protocol adopts the principle of bridging, which has the characteristics of stable data rate and small transmission delay, and is suitable for interconnection as a 3G 4G mobile communication base station. The data-based bridge adopts the IP transmission mechanism, etc., and the interface protocol adopts the bridging principle, which has the characteristics of flexible networking and low cost, which is suitable for network data transmission and low-level monitoring image transmission, and is widely used in various data network solutions based on pure IP architecture. Here's how to set up a wireless bridge base station:
1. Setup Precautions and Primary Router Settings:
Log in to the background management of each router, unify and fix the background IP format that is easy to identify, mainly remember the LAN IP of the main router, log in to the main router to enable the DHCP service, and set the DHCP IP range as needed, and then set the wireless name, SSID number and MAC address of each router respectively.
It's important to remember; 2. Bridge Settings:
Log in to the router (non-primary router) that needs to be bridged, go to Basic Settings under Wireless Parameters, and select the Enable WPS check box.
Then click the following "Scan" button: find the wireless signal scanned by the router, click the "Connection" link behind the device we need to bridge: in the returned "Basic Settings", we can see the wireless SSID that has been connected, if you have a password, you need to enter the password of that router (that is, the main router), click the "Save" button
-
Anonymous users2024-02-051. Concept of this paragraph Wireless bridge, as the name suggests, is the bridging of wireless networks, which uses wireless transmission to build a bridge of communication between two or more networks; Wireless bridges are divided into circuit-based bridges and data-based bridges from the communication mechanism. The circuit-type bridge wireless transmission mechanism adopts the PDH SDH microwave transmission principle, and the interface protocol adopts the bridge principle, which has the characteristics of stable data rate and small transmission delay, and is suitable for the integration network solution with multiple needs, and is suitable for the interconnection and interconnection of 3G and 4G mobile communication base stations; The data-based bridge adopts the IP transmission mechanism, and the interface protocol adopts the principle of bridging, which has the characteristics of flexible networking and low cost, which is suitable for network data transmission and low-level monitoring image transmission, and is widely used in various data network solutions based on pure IP architecture. View the original post
-
Anonymous users2024-02-04If you meet the following conditions of multi-core, high-bandwidth, multi-band, and high-power long-distance coverage transmission network data, you can build a WiFi base station step by step.
Multi-core: Due to the requirement of the number of clients accessing, the wifi base station must have multi-core computing, that is, the computing power of the core switch (router) must be strong enough;
High bandwidth: The number of client access is calculated based on the area of the covered area to ensure sufficient bandwidth to meet the uplink and downlink data traffic of the client.
Multi-band: The base station core is applied to the frequency band to meet the needs of multiple AP ends, and the AP side can be applied to the frequency bands.
High power: transmit energy transmit power (dBm) Antenna gain (dbi), to meet high power and long-distance coverage, it is necessary to use AP (such as UBNT repeater) with transmit power of more than 1W and sector antenna above 20dB, and ensure that the antenna is above the ground at a height of more than 25 meters.
-
Anonymous users2024-02-03In fact, it is very simple, the premise is that there must be a network cable, in the case of a network cable, buy a wifi router, recommend D-link DIR-615 is very easy to use, let it be very simple, connect the network cable to the router, through the CD that comes with the router, install the program on the computer, and then set it up, turn on the router, there will be WiFi network coverage near you, and your WiFi router is your WiFi base station.
-
Anonymous users2024-02-02Do you mean to build it with a computer?
If it's one, press the network application center (online neighbor), and then press that to establish a new network connection, the last option in it is "computer to computer", Nick from ** according to the guidance to set up, and then someone else's machine enters the password of the network you set to go in and you can connect it!
-
Anonymous users2024-02-01As the name suggests, a wireless bridge is a bridge between wireless networks, which uses wireless transmission to build a bridge of communication between two or more networks; Wireless bridges are divided into circuit-based bridges and data-based bridges from the communication mechanism.
The wireless transmission mechanism of the circuit bridge adopts the principle of PDH SDH microwave transmission, and the interface protocol adopts the principle of bridging, which has the characteristics of stable data rate and small transmission delay, and is suitable for interconnection as a 3G 4G mobile communication base station.
The data-based bridge adopts the IP transmission mechanism, etc., and the interface protocol adopts the bridging principle, which has the characteristics of flexible networking and low cost, which is suitable for network data transmission and low-level monitoring image transmission, and is widely used in various data network solutions based on pure IP architecture. Here's how to set up a wireless bridge base station:
One. Setup Considerations and Primary Router Settings:
Log in to the background management of each router: Uniformly fix the background IP format that is easy to identify, and mainly remember the LAN of the main router
IP:, log in to the primary router to enable the DHCP service, and set DHCP as needed
IP range, then, set the wireless name of each router separately, the SSID number and MAC address of the main router must be remembered;
Two. Bridge Settings:
Log in to the router (non-primary router) that needs to be bridged, and enter the "Basic Settings" under "Wireless Parameters", select the "Turn on WPS" checkbox, and then click the following "Scan" button: find the wireless signal scanned by the router, click the "Connect" link behind the device we need to bridge: in the returned "Basic Settings", we can see the wireless SSID that has been connected, if you have a password, you need to enter the password of that router (that is, the main router), click "Save" button to do it:
The problem of hidden terminals in wireless bridges has always plagued the normality of the connection between the bridge and the client. It is difficult to make each piece of equipment work properly in terms of distribution. The Ansin TDM series products developed by Shenzhen Anxin Network System **** solve this problem. >>>More
There are two cases:
The wireless bridge is connected to the WAN port of the wireless router under the wire >>>More
If it's broadband, install a wireless router, and if it's a mobile phone network card, buy a small wireless router for a mobile phone card, which is convenient.
2. Check whether the wireless network card driver is successfully installed in the computer device manager, and check whether the wireless network card has been started, the method is to click "My computer (win7 system is "computer") on the desktop, and then select "Properties" - Hardware "" - Device Manager, there should be a wireless network card adapter under normal circumstances. >>>More
First, see if someone has stolen your wireless network, and now there is a kind of network card that can crack the password, and second, see if the wireless network connection is limited, the connection is limited, or the number of connections is limited.