After the car is coated, it is stipulated that the car can be washed after 7 days, but when it is 4

When the car coating is drenched in light rain for 4 days, there is no need to wash the car, and it will not affect the effect of the car coating.

Car coating is a popular car maintenance item. After the automobile coating, a hard inorganic coating layer is formed on the surface of the car paint, which is closely combined with the car paint to improve the hardness and smoothness of the paint surface, completely isolate the paint surface from the air, and never fall off without external force factors.

It can greatly improve the gloss of the varnish on the surface of the paint, making the paint look more vivid and dazzling. Not only that, but automotive coatings generally have other functions: corrosion resistance, high temperature resistance, scratch resistance, and easy cleaning.

If you do the coating in an outside repair shop or beauty shop, it will be higher first, and the polishing process will damage the car paint.

Don't worry, no car wash.

The plating is completed within 24 hours, and the purpose of waiting for 7 days is to reach the highest hardness after 7 days.

Car washing, towel fibers, and dust and sand particles in the sponge will damage the plating when the hardness is not at its highest.

Crystal plating can effectively resist scratches on branches, but even when the hardness of the plating reaches the highest, it cannot prevent sand scratches, but it can reduce such scratches by 70% to 80%.

There is no need to wash the car if it rains within 7 days, but be careful not to touch the paint surface with the collection, as the dust on the paint surface will cause fine lines under the pressure of the hand. The same is true after the plating is completely fixed, so do not touch the dusty paint surface with your hands.

Because of love so focused, I hope it helps you :)

From Germany Leka fast car beauty craftsman.

After the car coating is done, it generally takes about 10 to 15 days to wash the car.

Paint coating technology, Fengleadgao is the latest generation of automotive paint protection technology in the world. The real automotive coating should be an inorganic coating, that is, a crystal glass coating that will never oxidize. Only the silver ruler has an inorganic coating, which is the coating layer covering the surface of the car, and will not be oxidized by external factors such as ultraviolet rays and acid rain and disappear.

Generally, it is recommended to do car paint coating every 1 year or so.

After construction, a hard inorganic (silica glass crystal) coating layer is formed on the surface of the car paint, which is closely combined with the car paint to improve the hardness and smoothness of the paint surface, completely isolate the paint surface from the air, and never fall off without external force factors.

Coating is the coating of a very thin, transparent film on the surface of the lens. The purpose is to reduce the reflection of light, increase the light transmittance, and suppress flare and ghosting. Different colors of the coating also make the imaging color balance different. In addition, the coating can delay the aging and discoloration of the lenses.

Paint coating beauty is the highest measure of paint protection, which can avoid oxidation.

How long does it take for a car to rain after coating Usually after 30 minutes of coating, the surface of the coating can be hardened, and it can be rained after hardening: 1. When the light enters different transmitted substances (such as air into the glass), about 5% will be reflected, and there are many lenses and refractors in the optical sight, which can make the incident light loss by 30% to 40%; 2. Modern optical lenses are usually coated with a single-layer or multi-layer fluoride beam cracked magnesium anti-reflection coating, the single-layer anti-reflection coating can reduce the reflection to, and the multi-layer anti-reflection coating can reduce the reflection to, so if the whole sight is properly coated with rubber coating, the light penetration rate can reach 95%; 3. Lenses coated with a single-layer anti-reflection coating are usually blue-purple or red, while lenses coated with multi-layer anti-reflection coating are pale green cherry or dark purple. @2019

1. It is best not to clean the vehicle within 7 days after the car is coated to achieve the best bright effect of the coating.

2. In the future, neutral car wash liquid should be used in the car washing process, but alkaline liquid should not be used. Alkaline car wash liquid foam, which has a dissolving effect on the coating layer.

3. Under high temperature conditions, the coated car should be avoided from the sun as much as possible, and the car should be parked under the shade of trees or in the underground parking lot. If there is really no way to avoid sun exposure, you can use a better heat-insulated reflective car cover for protection. It is best to park the model land vehicle that has not been used for a long time in a cool garage.

Usually after 30 minutes of coating, the surface of the coating can be hardened, and after hardening, it can be exposed to rain. It takes about 48 hours for the coating layer to be completely dry and hard.

1. The general requirement is not to wash the car within three days to avoid causing the car film to fall off.

2. More importantly, do not lift or lower the film doors and windows within a week to prevent film displacement and rolling.

Half a month, our car was washed twice in half a month, and the effect was particularly good.

The reason why you don't let the car wash is that the glue on the film has not dried, and you can't open and close the windows and rinse for fear that the film will fall off.

When the sunshine is strong, 1 week is definitely no problem, and in general, 2 weeks can be washed. In humid climates should be longer than that. There is no set time, and you can wash the car when you feel that it has dried.

It's best to be as long as possible. Usually 10 to 15 days... Hope it helps.

After the car is coated, it can be left in a dry environment for 2 days before the car can be washed.

1. Wash the vehicle through the car washing machine, the purpose is to wash away the dust and mud spots on the car;

2. The purpose of rhinoceros mud fine car washing is to remove the substances that cannot be washed off by washing, such as gum, shellac, bird droppings, paint mist, and chemical dust, which are attached to the paint surface;

3. Masking, the purpose is to avoid injury and staining of plastic and rubber materials with car wax;

4. Polishing, the purpose is to remove the oxide layer and treat the paint defects;

5. Mirror restoration, the purpose is to improve the brightness of the paint, commonly known as increasing the mirror effect of the paint;

6. Wash the car again, the purpose is to wash off the dust that flies when polishing and mirror restoration with clean water, and reduce the polishing effect;

7. Polishing quality inspection, the purpose is to confirm the polishing effect;

8. One-time coating, the purpose is to lay the foundation;

9. Natural drying, the paint surface needs to be wiped clean after drying, the purpose is to make the secondary coating effect more significant;

10. Re-coating, the purpose is to consolidate the coating effect;

11. Infrared lamp baking, the purpose is to make the coating product deeply penetrating and drying quickly, (the hardness of the coating after baking is greatly increased, and it can also achieve long-term protection of the paint surface);

12. Wipe it clean, and complete the whole coating after the details are processed;

13. Quality inspection, final quality control;

After three days, wax once every half a month, so that the effect of your car coating will last a little longer, after the coating, the maintenance of the car paint in the later stage has a lot to do with the time of coating warranty. If you have any problems with the paint of the landlord's car, you can always find me.

There are many coating products, it depends on what kind of construction method you coat, if you just apply it, start to wipe it, there is no hardness! And the maintenance time is not long Good is called two or three months If the construction method is more complicated For example, spraying with a spray gun or the construction takes more than an hour (excluding pre-treatment), the general holding time is relatively long The next coating can be coated with **A nano coating This is on the news Not an advertisement.

The coating is an electrophoresis technology that adsorbs the hardness and smoothness of the substance "PTFE" with the highest hardness and smoothness known to mankind on the surface of the car paint to form a comprehensive protective layer that is resistant to acid, alkali, wear, ultraviolet rays and corrosion. It is currently the mainstream paint protection measure in North America. Generally, it is best to wash the car after one week.

Hope it helps.

Hello, you can wash the car in two days, thank you.

The car can only be washed after 7 days, and do not see water for 7 days.