What s going on with the iPhone being always connected lately and no sound 5

There is no sound on the Apple mobile phone, sometimes it may be that you set it on it or accidentally turned on the "turn off sound" button, then, even if the ** sound is not sound on the Apple mobile phone, to solve this problem, please follow the steps below to set the operation:

Check whether the [Mute] button is turned on on on the side of the iPhone, and select [Off] Mute to restore the sound.

Some friends may turn on mute on the shortcut keys of the Apple mobile phone system, Settings - General - Accessibility - AssistiveTouch - Turn on AssistiveTouch, and then click the small white dot displayed on the screen, and turn off the mute in the shortcut keys.

Or if you set the Do Not Disturb mode of the Apple phone, then within the set time period of the settings, the Apple phone will be adjusted to the silent state, and your Apple phone will be quiet, and you need to manually turn off the Do Not Disturb mode setting to return to normal.

If there is still no sound on the phone, the phone may enter the headphone mode and recover, please insert the headphone data cable of the Apple mobile phone into the headphone jack, and then dial it out to listen to the sound to see if it returns to normal.

If the phone sound is still not back to normal, there may be an error in the Apple phone system, you can try to restart the phone to see if it can be solved, if not, you can try to restore the factory settings of the phone.

If there is still no sound, you can contact the after-sales repair of the Apple mobile phone and go to the service center to check whether the mobile phone is caused by hardware problems.

The main reasons why the phone suddenly stopped making sound are as follows:

1. The speaker of the mobile phone is broken, and in this case, you need to take it to the mobile phone repair shop for repair. Generally speaking, it is best to return to the factory for maintenance, and do not repair it in a small shop to prevent the other party from replacing parts.

2. There is a software failure on the mobile phone and the audio driver is damaged. Similar situations, of course, if they can't be solved, then they need to be repaired.

4. The sound of many mobile phones is separated, such as multi**, playing games, etc., it depends on the specific situation, such as multi** There is no sound, as long as the multi** is adjusted to the maximum.

5. There is no sound when playing **, which leads to this situation is generally a problem of flashing. Then it needs to be repaired.

There are many people who like the iOS system, so there are more people who choose to buy Apple mobile phones. In addition to its good performance, it has many advantages that attract us, but it also has some problems that are prone to occur, which makes many novice little whites of Apple mobile phones at a loss, such as Apple7When answering **, they found that there was no sound, what is going on? If this happens, how can we solve it reasonably?

Next, I will support you with a few tricks,Teach you how to deal with the problem of Apple 7 receiving **No sound,I hope the introduction of the following content can help you and effectively solve this problem。

Method 1: We can check the phone to see if it is set to silent, if the mute button of the Apple phone is on the left side of the phone, we need to check it carefully.

Method 2: It is also possible that we turn on the Do Not Disturb mode on the mobile phone, if it is turned on, we can directly turn on or off the Do Not Disturb mode here in the control center. Swipe up with your finger on the screen to bring up Control Center.

Method 3: It may also be caused by setting the Turn off all sounds option, it is recommended that you can go to "My Device" in the "My Device" in the phone settings, find "Turn off all sounds" in the "Accessibility" interface, and then uncheck it. Or find the Volume button in Sound in Settings and try to turn up the volume.

Method 4: If the above methods still don't work, you can back up the data in your phone and restore your phone to factory settings.

The above is the specific operation method of how to solve the problem of Apple7 connection**No sound,I believe that everyone can quickly learn how to operate through the introduction of the above content。

When you hit **, the iPhone earpiece has no sound, and the speaker has sound, most of the cases are that the shrapnel in the earphones does not bounce back, and the mobile phone thinks that you are using the headphones. There are two solutions: the first is to dip a cotton swab in some alcohol and pluck left and right in the earphones to loosen the shrapnel and automatically bounce back.

Then gently pull out the swab. The second way is to plug in the headphones when you plug them in**, and then unplug the headphones so that the earpiece may have sound.

iPhone comes**no sound only vibrate, but listening** is a matter of setting your phone's mute switch. Did you press the mute button. As shown below, dial up to return to normal ring mode.

1. If there is no sound on the Apple mobile phone, it may be caused by turning on the mute button of the mobile phone, or turning the mobile phone on the silent mode, you only need to see if the mute button or silent mode of the Apple mobile phone is turned on, if so, you only need to turn off the mute button. 2. Causing no sound on the Apple mobile phone may be caused by system setting problems, generally you can set up to restore the mobile phone system, after turning on the mobile phone, and then open the "settings" on the main screen of the mobile phone. Open the "General" option, and then find the "Restore" option in the general list of your phone, tap to open, tap to select the "Reset All Settings" option to start the restoration, or restart your phone a bit.

3. If there is no sound on the Apple mobile phone, it may also be caused by hardware problems, if it is a hardware problem, you need to send the mobile phone to the after-sales service. 4. If the above methods cannot solve the problem, it may be caused by a problem with the firmware system of the mobile phone, and you only need to restore the firmware system of the mobile phone.

Hope mine is helpful to you.

Hello dear, the iphone phone can not hear the sound, this is because the Apple mobile phone system sound control program occasionally malfunctioned, you can try the following methods to solve the problem: 1. During the call, try to press and hold the volume plus key on the side of the fuselage to adjust the volume of the handset. 2. Turn off the phone and restart the phone to see if there is any sound.

3. Turn on the "** Noise Cancellation" function in the settings options of the Apple phone to solve the problem of no sound during the call. The specific operation process is as follows: 1. Take the iphone7 mobile phone as an example, light up the phone screen, press and hold the volume up button of the Apple body, and turn the "volume" to the maximum.

3. After the volume adjustment is completed, find the "Settings" option and click Open to enter. 4. In the settings interface, find the "General" option and click to open. 5. In the general interface, find the "Accessibility" option, and click Open to enter the next step.

6. In the auxiliary power collapse energy interface, find the "** noise cancellation" option, and click to turn on this function. 7. Move the button of "Channel Balance" to the middle to keep the left and right channels of the phone balanced, which can solve the problem that the hand group with Zen machine cannot understand the sound. Hope it helps!

If my answer is helpful to you, please give it a thumbs up (rate it in the bottom left corner), your efforts are important to me, and your support is also the motivation for my progress. Wishing you good health and a happy mood!

Make model: iphone13

System: Take iPhone 13 as an example, it may be caused by a setting problem, and you can set the audio call mode automatically. It is divided into 3 steps, and the specific steps are as follows: 1 Go to Settings Accessibility Open the phone settings icon and tap the Accessibility column.

2 Enter the touch audio call mode Click Touch Options and select the audio call mode option.

3 Select Automatic to enter the page and check Automatic.