Vacheron Constantin mechanical watch how to adjust the year, month and day

1. First of all, to find the crown, on the right side of the watch, as shown in the image below.

2. Then, pull out the crown 2 pieces, enter the time adjustment mode, let the watch hand stop, and adjust the time to 6 o'clock, as shown in the figure below.

3. Push the crown back to enter the date adjustment mode, as shown in the figure below.

4. Pull out the second section of the crown again and enter the adjustment time mode clockwise.

Adjust the time, as shown in the figure below.

5. Finally, push back the crown to wear it, and you're done, as shown in the figure below.

If it's a real watch, it's not difficult to get the year, month and day, and there is a manual in the wooden box, don't talk about the fake, and the VC calendar is not within 300,000.

There is no way, only to go to the after-sales inspection to see what the specific problem is.

There will be no mistakes in a hundred years".

There are almost no problems.

I personally suspect it's fake.

Hello, glad to answer for you!

The correct way to adjust the date on your watch.

1. The handle in the middle is screwed like a screw, according to the waterproof design of the counter, and when adjusting the time, it is screwed downwards counterclockwise, and it is loosened like a teacup lid.

2. After unscrewing, it is screwed directly upwards at 0 gear, and it is manually wound. (If you buy a new watch or have not worn it for a long time, please manually wind it for 30 turns when you wear it again, so as to ensure the energy of the watch, which is usually not needed).

3. Pull it lightly, it is 1 gear to twist up to adjust the week, and down to adjust the calendar.

4. When pulling it, it is 2 gears that can adjust the time. (It is not recommended to debug the watch privately, it is recommended to go to the after-sales center for debugging and calibration!) ）

Note: At 21:00-4:

Please do not adjust the time counterclockwise between 00, because the day-changing mechanism of the watch has been engaged from 9 p.m. to 4 a.m., and the adjustment time will break the date change gear. This period of time is commonly known as the red line area, in addition, when the watch with a date adjusts the time, try to move forward and not backward, which is also a protective gear.

If you have any questions, please call** Please feel free to call.

1. Pull the crown two sections to the right.

2. Turn the crown counterclockwise to adjust the time to 6 o'clock.

3. Push the crown back into one section.

4. Adjust the date and day of the week to the day before you adjust the meter (for example, if you adjust the watch on Friday the 29th, then adjust it to Thursday on the 28th).

5. Pull the crown to the right again to the position where the time is set.

6. Rotate the crown counterclockwise to adjust the time to 12 o'clock (one or two times, when the date jumps, it is 12 o'clock in the morning on the day of the watch adjustment.

7. Continue to rotate the crown counterclockwise to the time you need to set.

8. Push the crown back to the left two squares to the closed place of the crown, and the adjustment is completed.

1. First find the crown, which is on the right side of the watch.

2. Then, pull out the crown by 2 sections, adjust the time mode, let the watch hands stop, and adjust the time to 6 o'clock.

3. Then push the crown back to adjust the date mode.

4. Pull out the second section of the crown again, enter the adjustment time mode and adjust the time clockwise5. After adjustment, push back the crown to wear.

Hello answer. I am Mianmian is very happy to serve you, your question I have received, after reading will reply in time, after asking, because the list is too much will be answered in turn, will not not not answer, please be patient!

For watches with a calendar, pull out the handle a little bit, you can adjust the day of the week clockwise, adjust the date counterclockwise, and pull the handle to the outermost point to adjust the time, the specific operation is the same as that of a watch without a calendar.

Here's how to watch quartz.

First of all, at 24 o'clock, the watch hand is in the second half of the circle, and the time is between 10 and 2 o'clock in the evening, do not adjust the date directly, which may damage the date transmission gear. Set the time to 10-2 p.m. first. Then start to dial the knob to adjust the date, for example, today is the 26th, you have to adjust the date to the 25th.

Then dial it outwards and adjust the hands so that the date jumps to the 26th. Then adjust to the correct time. (If it is in the morning, it is less than one turn of the time hand, if it is in the afternoon, it is necessary to turn more than 1 circle, so that the 24 o'clock hand is more than half) must pay attention to the 24 o'clock to match the real time.

This is the method of a mechanical watch.

Hello, my answer has been sent out, I hope my answer can help you, do you have any other questions! You can bring it up, and I'll help you analyze the answer. The system is updated every day, optimizing the data, is to bring you the best information answers, if there is no problem, please work hard in the lower left corner of the "I want to evaluate" there to help me like a like, thank you.

Have a great day! Good luck always accompanies you. ❤️