HP printers always prompt what to do if the paper is blocked

The paper is not placed correctly.

When putting paper, you can't put it too much, and generally only one-third of the paper needs to enter the paper deck.

When putting paper into the paper deck, the front end of the paper should be close to the bottom of the paper deck, and when it is about one-third of the way, there will be a slight feeling of resistance, which is fine.

In addition, the paper must be flat, not curled, wrinkled, otherwise it is easy to jam. Scraps of paper should also be cleaned up.

Finally, do not refill the paper during the printing process when printing, and wait for the printer to put the paper when there is no mechanical running sound, and the computer will also prompt the lack of paper, and click to continue printing after putting the paper. Otherwise, it will keep moving.

As an aside, the 2368 you said should be HP's printer, HP's printer must not open the lid during the printing process, in that case it will stop working, and the ink cartridge will stay in the position of changing the ink, which may cause some unnecessary failures, remember.

Printer blocked paper or jammed paper is a common situation in printers, you can first check whether the paper is put away, then see if there is anything blocked inside, and finally see if it is the reason why the printer temperature is too high.

You have to open several places in the machine to see if there is still stuck paper in other places, I have encountered such and such a situation before, the card on the surface is taken out, in fact, there is still inside, you take a look. Hehe.

There are the following reasons for the fact that there is no paper jam when it shows a paper jam

1. It is true that the paper is jammed, just because the paper (foreign body) is too small, or the position of the paper jam is hidden and you have not found it; This requires careful observation of the paper feed channel and removal of foreign objects (including paper pieces).

2. The relevant sensors in the feeding channel (especially the radio and television sensors are dirty or the sensor arm is broken or damaged, etc.) is not working properly, so it is necessary to detect the working status of the relevant sensors.

3. The printer has a false alarm, (fault memory) needs to restart the printer or enter the repair mode to restore or clear.

HP printers always prompt that the paper is blocked because the feeding wheel is grinding and the jujube is damaged, and it can be dismantled and replaced.

Tool Materials: Take the HP DeskJet 3636 printer and feed wheel as an example.

1. First, open the front cover of the HP DeskJet 3636 printer. Blind Chang.

2. Continue to open the snap loops on both sides of the feed wheel on the HP DeskJet 3636 printer.

3. Then remove the feed wheel from the HP DeskJet 3636 printer.

4. Then install the feed wheel of the new HP DeskJet 3636 printer.

5. Finally, the HP DeskJet 3636 printer is tested and printed, and the HP Deskjet 3636 printer feeds the paper normally.

Summary. Dear, hello, I'm glad to answer for you, how to dredge the clogged cartridge of HP printer Answer: The cartridge blockage of HP printer needs to be cleaned to clean the printhead.

In Control Panel - Hardware & Sound - Devices & Printers, locate the printer, right-click and select Printing Preferences (not Printer Properties or Properties). In"Printer preferences"window, click"Application tools"tab, select "Printhead Cleaning" for nozzle cleaning. After performing a wash, you need to print a test to see if it is still clogged, depending on whether there are still shadows and whether all the lines are complete.

It is important to note that this process is very ink-intensive, so make sure that there is enough ink allowance during the cleaning process. If the printer printhead is not very blocked, it can print normally, but the printed document is inferior to the previous one (such as the unclear handwriting of some words or **local color cast, etc.), if you don't want to be too troublesome, you can use the printer driver's own application tool to clean the printer printhead, generally speaking, most inkjet printers will come with an ink cartridge cleaning tool. If it is an HP printer, you can use the printer's built-in cleaning function to clean, generally there are 3 levels of cleaning, generally not more than 3 times.

Otherwise, the cartridge will malfunction. If the cleaning does not work, you can use the method of soaking in warm boiled water, and generally determine the brewing time according to the Chengdu where the cartridge is dry.

HP deskjet2722, the three-color ink cartridge used is 805XL, and now it can't be printed in red, other colors can be used, is there any solution?

Dear, hello, I'm glad to answer for you, how to dredge the clogged cartridge of HP printer Answer: The cartridge blockage of HP printer needs to be cleaned to clean the printhead. In Control Panel - Hardware & Sound - Devices & Printers, locate the printer, right-click and select Printing Preferences (not Printer Properties or Properties).

In"Printer preferences"window, click"Application tools"tab, select "Printhead Cleaning" for nozzle cleaning. After performing a wash, you need to print a test to see if it is still clogged, depending on whether there are still shadows and whether all the lines are complete. It is important to note that this process is very ink-intensive, so make sure that there is enough ink allowance during the cleaning process.

If the printer printhead is not very blocked, it can print normally, but the printed document is inferior to the previous one (such as the unclear handwriting of some words or **local color cast, etc.), if you don't want to be too troublesome, you can use the printer driver's own application tool to clean the printer printhead, generally speaking, most inkjet printers will come with an ink cartridge cleaning tool. If it is an HP printer, you can use the printer's built-in cleaning function to clean, generally there are 3 levels of cleaning, generally not more than 3 times. Otherwise, the cartridge will malfunction.

If the cleaning does not work, you can use the method of soaking in warm boiled water, and generally determine the brewing time according to the Chengdu where the cartridge is dry.

HP printers always indicate that the paper is blocked because the feed wheel is worn, and it can be replaced.

Tool Materials: Take the HP DeskJet 3636 printer and feed wheel as an example.

1. First, open the front cover of the HP DeskJet 3636 printer.

2. Continue to open the snap loops on both sides of the feed wheel on the HP DeskJet 3636 printer.

3. Then remove the feed wheel from the HP DeskJet 3636 printer.

4. Then install the feed wheel of the new HP DeskJet 3636 printer.

5. Finally, the HP DeskJet 3636 printer is tested and printed, and the HP Deskjet 3636 printer feeds the paper normally.

You'll need to check the feed sensor or pick-up wheel.

What kind of paper are you using, if the paper is not good, it will also get stuck.

One: Clean the print head manually.

1.Turn off the printer and unplug the power cord.

2.Open the top cover of the printer and locate the print head.

3.Use a clean cotton swab or soft cloth with a small amount of alcohol or detergent and gently wipe the surface of the printhead to remove any remaining paper scraps and ink. Be careful not to use too much force to avoid damaging the print head.

4.After cleaning, wait for the printhead to dry naturally.

5.Reinstall the print head, connect the power cord, turn on the printer, and check if it is back to normal.

2. Use the printer's built-in cleaning function.

1.Find the "Clean" or "Maintenance" option in the printer driver.

2.Follow the on-screen prompts to select the replica print head or the entire printer that needs to be cleaned.

3.The printer will be cleaned automatically, which may take a few minutes.

4.When the cleaning is complete, check if the print quality is normal. If you're still having clogging issues, try something else.

Three: Replace the ink cartridge or toner in a big uproar.

1.Make sure you run out of cartridges or toner or are close to running out.

2.Turn off the printer and unplug the power cord.

3.Open the top cover of the printer and remove the old ink cartridge or toner.

4.Depending on the printer model, purchase a new ink cartridge or toner and install it in the correct location.

5.Connect the power cord, turn on the printer, and check if it is back to normal.

If your HP printer is experiencing paper jams, you can try the following steps to resolve the issue:

1.The first step is to open the front panel of the printer cover and check if there is any paper jam. Carefully remove the jammed paper slowly to avoid tearing.

2.If you can't remove the jammed paper from the front panel lid, you can find and open the back panel of the printer. Try to remove the jammed paper as carefully as possible.

3.If that doesn't work, try opening the printer's paper drawer and checking that the paper stacks are neat layer by layer. Rearrange the paper and place it back in the paper drawer.

4.Also, check that the printer's paper settings are correct. Make sure that the appropriate type and size of paper is selected and placed correctly in the paper drawer.

5.After ruling out all the possibilities of physical blockages, you can also try restarting the printer. Sometimes a reboot can fix some temporary issues.

Remember to make sure the printer is disconnected from the power supply before proceeding with any repair or overhaul operations to avoid any safety issues.

HP printer paper blockage portable orange energy is caused by the following reasons:

Incorrect Paper Placement: Make sure that the paper is placed correctly to avoid the paper getting stuck inside the printer.

Incorrect Paper Type: Reselect the correct paper type.

Printer hardware issues: You can check and clean up printer hardware, such as scratching wheels. If the problem persists, you may need to contact a repair center.

Paper stuck inside the printer: Open the inside of the printer in time to clean up the paper stuck in the cave.

Ink is running out or has run out: In this case, you must replace the ink cartridge with a new one to continue printing.

The above are some of the reasons that may cause HP printers to block paper and corresponding solutions, you can adjust or fix them according to the situation.