What to do if the printer is jammed How to take out the printer jammed

The printer should take the jammed paper according to the jammed part (laser printer).

Paper tray jam: drag out the paper box, take out the jammed paper, if the paper is jammed in the paper roller part, you must also drag out the paper tray to take it;

Alignment jam: Open the front door, take out the toner cartridge, and drag out the jammed paper according to the feeding direction;

Fusing jam: open the back door or side door, and release the fixing pressure control; Drag out the jammed paper in the output direction;

Paper jam paper output: open the back door or side door, and drag out the paper jam directly in the direction of paper output;

Due to the relatively simple design of inkjet printers, when there is a paper jam, the front door or top cover is generally opened, and the paper jam can be slowly dragged out according to the paper output direction;

Of course: if there is a paper roll on the fuser roller or take out the jammed paper is still reported to be jammed, it is necessary to ask professional maintenance personnel to solve it.

1. The paper tray is jammed, pull out the paper tray and pull out the damaged paper from the paper tray.

2. In the middle of the printer, first see if the paper can be seen in the paper feeding area, and if you can, slowly pull the paper out of the printer under Jian Zaoqi.

3. If you can't see the paper, then you should open the top cover area to find the paper, if you can't easily move the paper after finding the paper, don't pull it out forcibly, move the roller slowly to pull it out.

4. The paper is jammed in the output area, the paper is stuck in the output area, it is best to take out the paper through the rear door, you can pull it out along the roller in the back door, and the action must be slower.

5. The double-sided device jams the paper, open the double-sided cover, pull it to see if you can pull out the paper, if you can't stop the tomb, take out the ink cartridge, you can easily take out the paper.

1. Paper tray jam: Pull the paper tray out of the printer, pull out the damaged paper from the historical paper tray, and then put the paper away to see if the paper is wet, if you want to change the paper.

2. Paper jam in the middle of the printer: First, see if the paper can be seen in the paper feeding area, and if so, slowly pull the paper down and out of the printer. If you can't see the paper, open the top cover area to find the paper.

Note: If you can't move the paper easily after finding it, don't force it out and move the roller slowly to pull it out) If the paper is attached to the tray, try pulling it out through the top of the tray or from the top cover area.

3. Paper jam in the output area: The paper is stuck in the top output area, but most of the paper is still left in the printer, it is best to take out the paper through the rear windshield door. This allows it to be pulled out of the rear windshield along the rollers.

4. Double-sided device jammed: First of all, open the double-sided cover and pull it to see if you can't pull out the paper, if you can't take out the ink cartridge first, you can easily take out the paper.

1. Paper jam in the printer, there will often be continuous paper jams, you can first check whether the printing paper is wet, the paper is stuck between them, and two or more sheets of paper will be produced at the same time when printing, and the printer will be jammed. You can rub the paper apart so that it doesn't stick together.

2. When the printer paper is not damp, you can open the printer to see if there is a piece of shredded paper inside, and if you don't take it out when the paper is jammed in the previous time, you can use a flashlight to illuminate it, check it carefully, take out the shredded paper, and avoid the printer jamming.

3. When there is a problem with the toner cartridge, it will also cause the printer to jam, you can open the toner cartridge, take a closer look, if there is a problem with the roller of the toner cartridge, replace it with a new toner cartridge, so that the paper will not be jammed.

Printer paper jam is a very common thing in daily life, there are many reasons for printer jams, the printer is printing when the paper is pulled out, the quality of the printed paper is not up to specification, the paper feeding path has paper scraps, shredded paper and other debris, the installation of the paper tray is not normal, the paper quality is not good, the paper sensor is wrong, etc. Let's take a look at what to do if the printer is jammed.

Step 1: Open the lid, take out the toner cartridge, and take the paper. You can open the front cover of the printer, take out the toner cartridge first, and then pull out the jammed paper, but pay attention to the fact that you must take the paper in the direction of feeding, and never turn any knob in the opposite direction, and slowly pull the paper out of the printer, do not tear the paper.

Note: Some laser printers often jam paper, the main reason is that the paper weight is not appropriate. For example, if 70 grams of paper is required, it is better not to use 80 grams of paper.

Step 2: If the paper is jammed frequently, check the paper feed channel and remove debris from the output path, and the front edge of the paper should be just above the metal plate. Check if the paper roller is worn or the spring is loose, and the pressure is not enough, that is, the paper cannot be fed into the machine.

When the paper roller is worn and cannot be replaced for a while, the method of winding rubber bands can be used for emergency treatment. After winding the rubber band, the friction of the paper rubbing is increased, and the paper feeding can be restored to normal. In addition, the installation of the paper tray is not normal, and the paper quality is not good, which will also cause the failure of paper jam or paper inability to take out.

Step 3: Paper jam is a common phenomenon in daily life, there may be internal causes of the machine, but there is also a considerable proportion of due to improper use. Sometimes there is no paper inside the printer, but the printer prompts that the paper is jammed, at this time, you can do a clear memory operation (the operation of clearing memory is different for each printer, you can call the manufacturer's free service** to consult the engineer).

In real life, almost everyone who has used a printer has encountered a printer jam, and the printer jam is a more headache than the return posture, thenPaper jam on the printerWhat to do? Below we will bring you the solution to the printer jam, I hope to help you.

What should I do if the printer is jammed?

Printer paper jam solution 1: Unplug the power supply, open the upper cover of the printer, and set up the bracket. We first need to remove the paper from the tray area, slide the tray out of the printer, and then remove the damaged paper from the tray. If the edge of the paper is visible in the feed area, slowly pull the paper down and out of the printer.

If you can't see the paper, look for it in the top cover area. If the paper is attached to the tray, try removing it through the upper part of the tray or from the top cover area.

Printer jam solution 2, open the top cover, and then close it to clear the paper jam information, if the paper jam information is still displayed, it means that there is still paper jam in the printer. Looking for a paper jam. Clear the jammed paper from the top cover area, open the top cover, and remove the print cartridge.

To prevent damage to the print flour pack, do not expose it to sunlight for more than a few minutes. Slowly pull the paper out of the printer. Close the paper checker cover, reload the print flour tray, and close the top cover.

If the paper jam message is still displayed, there is still a paper jam in the printer.

Printer jam solution 3, clear the paper jam in the output area, if the paper is stuck in the top output area, but most of the paper is still left in the printer, it is best to take out the paper through the rear windshield door. Push the two grey bolt locks to release the rear gate. Push down on the green paper release handle, grasp the sides of the paper, and slowly pull the paper out of the printer.

If it is difficult to remove the paper, open the top cover and remove the print cartridge to reduce pressure on the paper and close the rear windshield. Open the top cover, and then close it to clear the jam information. If the paper jam message is still displayed, there is still a paper jam in the printer.

Printer jam solution 4, clear the paper jam in the optional duplex printer, slide the paper tray out of the printer, slowly pull the paper out of the printer, reinstall the front cover of the duplex printer, and then reload the paper tray.

Printer jam solution 5, if it is stuck at the exit, when it is cold inside, open it back up, and when it is preheated, the paper will automatically come out.

Printer jam solution 6, when taking the paper, you must pay attention to protect the sensor leak guesser. After the paper is taken out, the printer can be reset, the alarm will be canceled, and the printer can perform the printing task normally.

The above is for you, what should I do if the printer is jammed? The entire contents of the printer jam workaround.