The CD computer can t read it, and the CD player can quickly read out the catalog but can t

If your disc is ***, you can't put it out when you put it in the CD, because the format of the two is different, the degree of compression is different, and the decoder is not the same; A broken disc or a broken CD won't work.

Refer to the following:1Locate the CD-ROM eject button on your computer's host computer and press it as shown in the image below.

2.Then place the disc in the disc drive tray and push it into the host channel as shown in the image below.

3.After that, find the computer on your desktop and click Open as shown below.

4.In My Computer, find the insertion capacity of the CD and click to enter, as shown in the image below.

5.After that, you can view the files in the CD as below.

There could be 5 reasons for this.

1. Wrong disc selection: The format of the mounter is different, if you choose the wrong disc, the CD player will not read the disc.

2. Serious disc scratches: We often do not pay attention to the protection of the disc, resulting in serious scratches or damage to the disc, resulting in the bald head sensor can not read the digital information correctly, resulting in the card, not reading the disc and even "crash".

3. The bald head is too dirty: the bald head sensor is an important precision component, and if there is a lot of dust, it is easy to refract the light wave or even cover the light wave transmission, resulting in the inability to read the information and the disc. Because the bald head sensor** is expensive and cannot be repaired, it should be cleaned by a professional maintenance technician using a professional cleaning solution.

4. Long service life: CD used for a long time, some parts may be aging, it is recommended to replace the CD machine.

5. Circuit problems: short circuit will cause the CD to be unable to read the disc, and should go to a professional store for maintenance.

Click Start in the lower left corner to open the run window, and enter "regedit" in the input box.

The system will automatically pop up the registry and <>

In the navigation bar on the left side of the window, open the following locations in order:

hkey_current_user/software/microsoft/windows/currentversion/explorer/cd burning/staginginfo/volume。

Finally, close the registry and check your computer again, and it should be fine now.

The computer optical drive can be read*** but the data on the CD can't be read.,What's going on?。。

Hello, dear, I'm glad to serve you: the computer optical drive can be read***, but the data on the CD can't be read because the optical drive compatibility is very poor, the principle of optical drive reading is to use a single optical head and two beams (a light head, with two different wavelengths of laser) to read the CD disc and *** disc respectively, and automatically identify the type of disk. If there is a problem with one of them (including the decoding line), this kind of disk cannot be read, but it will not affect the normal operation of the other disk.

You can try to change a few normal CDs, and if you can, it's this CD-ROM that doesn't recognize certain discs. Thank you for your trust, the above is my reply, I hope it can help you, I wish you a happy life.