The time on the status bar is not accurate, what to do, ask for help

2.Try with Auto Date & Time: Set - Date & Time - Set Date & Time Automatically - Slide on or Tick.

3.If your mobile phone is a telecom custom-made phone: the time is automatically synchronized with the network when using the CDMA telecom card, and cannot be changed. If the time is incorrect, it is recommended to turn off the phone and restart it.

4.Some mobile phone batteries can be disassembled, if the time is inaccurate after replacing the battery, it is recommended to use a direct charger to charge the phone, which may be caused by the lack of power in the motherboard's backup battery.

If the problem persists after the above operations, please bring the purchase invoice, warranty card and device to the Samsung service center for inspection.

Hi Mi 2 series.

c.When everything is ready, please follow the flashing tutorial on the official website to use the sixth line brush, which is the official flashing tutorial:

It should be that the coin cell battery in your motherboard is dead, just replace it. It looks like your computer hasn't been turned on for a long time. Frequently used machines can constantly charge the battery, and this problem will not occur.

If you look at your region, it's true, the battery in your motherboard is dead.

No need to ask, it must be the battery dead.

Change the battery of the BIOS, or it will affect the machine.

The steps to set the computer clock are as follows:

1 Open the Control Panel - click on the Clock Language and Region buttons.

2Click the Set Time and Date button.

3. Click the Change Date & Time button.

4. Adjust the correct time and click the OK button.

Open the case cover, you can see the battery directly on the motherboard (coin cell battery, slightly smaller than a dollar coin), take it off and put it back on, try it; If it doesn't work, replace it with a new one (general computer accessories and maintenance places are sold); If it doesn't work, the BIOS is bad, and it's best to find a professional to refresh it.

The motherboard may be broken, and the electric melter has not occurred.

Well, it's possible that it's poisoned, and it's also possible that the coms battery of your machine's motherboard is dead, so you can replace it.

You can click on the traffic correction in the i Butler - Traffic Monitoring of the mobile phone and manually enter the used traffic.

In the input method settings. Set it up and hide it in taskbar customization.

Right-click in the lower-right corner and select Taskbar Settings.

Tap on the system icon in the notification area option – turn the system icon on or off.

Then turn off the input indication to solve the problem of random jumping.

Reason analysis: due to the existence of the input method system and Sogou, display and close will cause the Sogou icon to appear all at once closed, it will occupy the position, and then there will be a point miss, solve: At this time, we only need to remove the system icon and Sogou's icon, they will not appear, will not occupy the position, will not jump.

Right-click in the lower-right corner and select Taskbar Settings.

Turn the system icon on or off.

Turn off the input instructions,There will be no Sogou input method icon jumping around in the task icon。

When you enter the game character interface, you can choose which functions to use and which ones to disable, if you change these folder options, there may be some error prompts, so it is better to change it in the plug-in options in the lower left corner of the game character interface!

If the input command doesn't show up, you may have minimized the taskbar and used your mouse to look around where you used to display the task on the game screen!

Big brother: Same problem as you, how did you solve it?