How to operate the dormitory installed telecommunications through the router dial up Internet access

According to your description, you can install it by following the steps below:1To connect the network cable to the router, first set the IP of the computer's wired connection to , open the browser and enter (some are, the computer IP is set to enter the user name: admin password admin

2.Find a setup wizard in the router, step by step, select the PPPoe dial-up method, and set the Internet access and Internet password, 3If you need to set the wireless password, you can set the corresponding settings here, but finally set the encryption method to WPA2, because the password of the WEP encryption method is easy to crack, and it doesn't matter if you don't need it.

4.Make sure that the DHCP service is turned on in the router so that the computer can automatically get the IP address.

The steps to set up the router are as follows:

1. Press the win+r key to open the run, click enter to enter.

2. Enter ipconfig all and press enter.

4. Enter the address of the server in the browser and click Enter. Enter your user and password and log in.

6. Click Wireless Settings, and then tap Wireless Security. Click on the WPA key text box to change the WiFi password.

7. Click System Tools to select More Password Management, and you can set the login password of the router interface.

Connect the router and everything according to the instructions. Then find your router (each router has a different name) in the wireless connection and connect it, and a box will appear, asking you to enter a PIN or something like that, and look for it on the back of the router anyway. After connecting, open the IE browser, go on, click on the setup wizard, and then set it up, enter the account password and other information into it, and you can set the wireless name and password if you need to.

Physical Connection:

Set up router dialing:

Wireless, just set a separate password.

Hello: You first connect the device as shown below.

Enter the address you see on the router in your browser, which is usually.

Then enter,Enter the corresponding account and password,Generally, the newly bought admin is indeed the operation interface,You will see a setup wizard on the left,Enter the setup wizard interface。

If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

Enter the router settings, there will generally be a setup wizard to select the home user, adsl, enter the account and password, and confirm. In the future, you can go directly to the Internet, but if you don't use it, you have to turn off the router, otherwise it will still be counting the time billing.

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day!

Wireless Routing Settings:

1. There are 4 ports of the same color and one port of different colors behind the wireless router. Plug the network cable connected to the cat on the port of different colors, take another network cable and plug it into the 4 ports of the same color (any of the 4 ports will do) and connect it to the computer.

2. Check the IP address and account number and password at the bottom of the wireless router, generally admin admin, open the web page in the computer and enter this**, enter the account password to enter the wireless routing setting interface.

3. Click "Setup Wizard" to set up the wireless router, ADSL will select the PPPoe mode, then set the account password for dial-up Internet access, set the network name and password to be established by the wireless router itself, and click to complete the restart of the router.

4. Remember to set the IP address and DNS address in the local connection and wireless connection of the computer to be obtained automatically, otherwise it is useless to connect.

5. After setting up and restarting the router, the computer does not need to dial up the Internet again, because the router has already dialed in for you. If you dial again, it will obviously cause an account conflict. Check if there is a black check on the broadband connection shortcut in the online neighborhood, if there is a best right-click broadband connection, cancel it as the default networking method, or simply delete the broadband connection.

** Wire connection cat. The cat WAN port, the computer is connected to the LAN port of the router and connected to the wireless router to set up PPPOE dialing. Wireless encryption settings. Tablet search on the line for the correct signal on the computer and tablet

Buy a wireless router. Connect your current network cable to the 1234 ports. Then connect a cable out and connect it to your computer.

Go to the router to turn on the wireless and set the password (because the wireless router generally has a range of 50 meters, and others can use the ...... if you don't set the password.)Then you can use this book to search for your wireless cat. Enter your password. Set up automatic connectivity. ok

Connection: The network cable of the cat is plugged into the WAN port of the router, and the computer is connected to any LAN port of the router.

Log in to the router according to the instructions to set it up.

The WAN port is set to PPPoE dial-up, and the broadband user name and password are entered. Set a wireless connection password in the wireless security settings. Just restart your router as prompted.

It's ...... tiring to type on your phone

The router has an operation prompt, according to win7 or xp, there are two different setting methods, and the dial-up is directly in the router and the Internet access method is pppoe. How to enter the router to set up each router is different, and the way to enter is in the router manual.

Observe the conversation between LS and LZ, and conclude that buying a new route is simple and practical!

You can use a cat for a computer. Why use a router?

If it is broadband dial-up Internet access, that is, use the "password" provided by the "broadband operator" to dial-up to connect to the Internet, and you can use the wireless broadband router to dial up, so as to realize the wireless Internet function.

I don't understand, are you the only one in your dormitory who is online? Or do each roommate dial their own number? If it's the latter, your dormitory is really a noble dormitory

Steps:

1. Buy a wireless router [if it is limited to use in the dormitory, the 150m wireless router is easy, ** around 60 yuan, depending on the region, the price fluctuates].

2. There are two situations:

If you use a 'modem', which is commonly known as a 'cat', dial-up the Internet, connect the RJ45 interface of the 'broadband modem' with the 'WAN' port in the 'RJ45' interface of the 'wireless routing'. (If you don't know the meaning of the port, see the note at the end).

If it is a direct cell broadband, that is, there is no network cable with an RJ45 interface directly without the help of a 'cat'. The network cable can be directly connected to the 'wireless router' and 'WAN' port.

3. Connect the computer to any interface in the 'wireless router' and 'lan' ports (that is, the remaining 4 interfaces, if you buy a 4-port wireless router).

Or], enter the username and password, which are provided in the manual.

5. Enter the main interface of the router, you can configure it according to the 'Setup Wizard' [suitable for novices], select PPPoE mode, dynamic IP, and enter your broadband password as required, if you don't want to set a wireless Internet password, then it's basically done. If it is manually configured, you can select 'WAN Settings', WAN Port Connection Type:

Dynamic IP PPPoE

Internet access: Internet password:

Depending on your needs, please select the corresponding connection mode

1. On-demand connection, automatic connection when there is access to data.

2. Automatic connection, automatic connection after booting and disconnection. [If your broadband is not limited, choose this one].

3. Manual connection, which is manually connected by the user.

In this way, the wireless router Internet access is basically set up. If you need to set a wireless password, you can set it by referring to the wireless router manual.

Note: RJ45: This is the connector of the network cable. The kind of line is called 'RJ11'

WAN port: It is a broadband network port.

LAN port: It is the LAN port.

I hope it helps, please feel free to ask.

Yes, there are detailed instructions in the router If you use it for one person, you can use it without it, and you have to use it for multiple people.

Buy a wireless router, the instructions are very detailed.

Dear Telecom users, Hello!

According to your description, there is no router that supports filling in the verification code, which is a pity.

If the above information code-based does not solve your problem, you can also log in to Anhui Telecom Tianyi Store (

Hello, Anhui Telecom will talk about the answer for you.

Hopefully, the following will be helpful to you.

Campus e-Surfing broadband cannot use routers. At present, the broadband deployed by China Telecom on campus is generally composed of telecommunication network + campus education network, with campus operating broadband and campus network adding related network equipment to realize the one-to-one relationship between the physical address of the Internet equipment and the MAC address of the PC. Therefore, it can only be connected to the Internet by the Tianyi client, and it is impossible to make things leak with routing or other wifi sharing software.

If you need wireless Internet access, you can log in to the online business hall of Anhui Telecom to handle Tianyi wifi or handle traffic ** for mobile phones, traffic packages.

We will inform you of the latest preferential activities through Anhui Telecom's online business hall and official Weibo as soon as possible.

Hope mine can get yours.

Tell you a very simple way, call the customer service of the router directly tomorrow, and they can solve any difficulties.

Surely you got it right?