14 Land Rover Evoque 2 0 maintenance lights are reset to zero

Hello! The diagram below shows how to do it and the steps! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

This engine oil is the base oil of Class IV PAO, with good anti-recession ability, the maintenance mileage can be increased from 10,000 kilometers to 15,000 kilometers, the power is very good, the cleaning and silent effect is good, it can take good care of the engine, the experience is very good, and it is much easier to use than the original engine oil.

There are many tutorials in the maintenance manual or on the Internet, just take a look at it, and more importantly, the maintenance light is actually to remind you that it is time to maintain the car. In fact, many times, because I use better oil, so the maintenance time will be much farther than the manufacturer's preset mileage, I use GT Magic Red oil, 15000 km to change it!

The 14-year Range Rover Sport maintenance light is on, which means that the car is short of oil, start the engine and turn on the power, add a sufficient amount of oil, and the maintenance light will be zero; The specific steps to zero the maintenance lamp are as follows:

1. Open the door on the side of the Range Rover's cab.

Second, press the Range Rover's brake pedal to prepare for starting the engine.

3. Press the Range Rover's one-button start button to start the engine.

Fourth, the instruments of the Range Rover are all lit up, which proves that the power supply of the whole car is on.

5. Replenish the Range Rover with a sufficient amount of oil, and when the oil volume reaches the middle of the upper and lower scale marks, the oil replacement indicator will be automatically eliminated.

1. Start the 14-year-old Range Rover Sport and press the start button of the vehicle.

First of all, the sports version of the Range Rover is supercharged on sale, the supercharged power is more linear, more direct, start the engine and start working, Range Rover has supercharged and turbocharged options, turbocharging must reach a certain speed supercharger to work, but in comparison with the fuel consumption of supercharging is 20%-30% higher, there are pros and cons, the size of the car also has an impact on handling, and the interior of the sports version is slightly more concise, after all, it is advocating sports. I'm also a young person, and I'm more optimistic about the sports version.

1. First press the start button to start the Range Rover 14 petrol engine vehicle.

5. In the end, the Range Rover 14 gasoline engine vehicles completed the maintenance of the lights to zero.

1.Ignition switch off2Press and hold A3

Screw the ignition switch to position I4After 5s it shows oil service or inspection and reset sia5Release the button A, press and hold the button A, after more than 5s, the information RESET SIA starts to flash, 6

Release button A, press again, and release again 7The display shows the new service interval 8Press and release button A, and the message END SIA9

The ignition switch is off.

14 Year Range Rover Sport.

When the maintenance light is on, it means that the car is short of oil, start the engine to connect the liquid to the power supply, add a sufficient amount of oil, and the maintenance light will be zero; The specific steps to zero the maintenance lamp are as follows:

1. Open the door on the side of the Range Rover's cab.

Second, press the Range Rover's brake pedal to prepare for starting the engine.

3. Press the Range Rover's grinding scale one-button start button to start the engine.

Fourth, the instruments of the Range Rover are all lit up, which proves that the power supply of the whole car is on.

Fifth, add enough oil to the road blind Tiger Range Rover, and the oil volume reaches the middle of the upper and lower scale lines, and the indicator light for oil replacement will be automatically eliminated.

Land Rover Aurora Maintenance Lamp Reset Method:

1.Press the Land Rover Evoque's one-button start first to ignite.

2.Apply the function buttons on the right side of the steering wheel, that is, 4 keyboard buttons and an OK key, to find car information on the dashboard.

3.You can also see the "Last alarm" option (as shown in the image above) and press OK to enter.

4.At the same time, press the "down" function key of the right car steering wheel and the "i" function key on the top of the head to turn to the end of the lever, and ensure that this posture is calibrated up and down for 10s.

Finally restart the car, check if the zero is successful, and if not, you have to do it again.

The effect of Land Rover Aurora's maintenance lamp is only a prompt effect, not that the car has a common failure, but don't think it's not the main thing, although it is a small maintenance is also like this, the key to small maintenance is to replace the oil and filter element, if you don't change the oil for a long time, the actual effect of moisturizing is not easy to think about at the beginning so reasonable, resulting in damage to engine parts, and the refrigeration effect will also be sharply reduced, it is very easy to lead to a burst situation, so regular maintenance is very critical.

<> "Land Rover Aurora Maintenance Light Returns to Zero.

Land Rover Aurora maintenance light zero method, first press the Land Rover Aurora one-button start to ignite. Use the function keys on the right side of the steering wheel, i.e. 4 arrow keys and 1 OK button, to find the vehicle information on the gauge. Then you can see the "Last Alarm Whistlebend" option, press OK to enter.

At the same time, press and hold the down button on the right steering wheel and the i button on the end of the steering lever, and hold this action for about 10s to complete the reset. Finally, restart the vehicle and check whether the zero is successful, if not, you need to re-operate it.

The role of the Land Rover Aurora's maintenance lamp is only a reminder, not that the car is out of order, but don't think it's not important, even if it's a small maintenance, the small maintenance is mainly to change the oil and filter.

If you don't change the oil for a long time, the lubrication effect will not be as effective as at the beginning, resulting in the wear and tear of engine parts, and the cooling effect will also be greatly reduced, which can easily cause cylinder bursting, so regular inspection is very important.

Land Rover ** Aurora This car maintenance light zero steps:

1. Turn off the ignition switch and press and hold the A button; Turn the ignition switch to the "II" position, and the "Service" information will flash on the display for about 5 seconds and display;

2. Release the A button, "oil" will be displayed on the display, press and hold the A button for more than 6 seconds within 10 seconds, and "RESET" will be displayed on the display for 5 seconds.

Press and hold the A button for more than 6 seconds within seconds, and "RESET" will be displayed on the display and "DATA" will be displayed after 5 seconds;

Press and hold the A button for more than 6 seconds within seconds, and the display will display "RESET" and "END" after 5 seconds.

Press the A button once within seconds, and the next maintenance interval mileage and time will be displayed on the display after 10 seconds. Turn off the ignition switch and the maintenance reset is completed.

Summary. Hello dear, the 22-year Land Rover Aurora maintenance lamp zeroing method is as follows:1

Press the key to start ignition. 2.Use the function keys on the right side of the steering wheel, i.e. 4 arrow keys and 1 OK button, to find the vehicle information option on the gauge.

3.When you see the "Last Alert" option, press OK to enter. 4.

Press and hold the "down" button on the right steering wheel and the "i" button on the end of the steering lever at the same time, and keep this action for about 10s to complete the reset.

2.Use the function keys on the right side of the steering wheel, i.e. 4 arrow keys and 1 OK button, to find the vehicle information option on the gauge. 3.

When you see the option "Raise Min Last Alert", press OK to enter. 4.At the same time, press and hold the "down" button on the right steering wheel and the "i" button on the end of the steering lever, and hold this action for about 10s to complete the reset.

Changpi. First start the vehicle, find the control button on the right side of the multi-function arrow key royal disk, open the settings page on the dashboard, select the vehicle chain completion information, find and click the latest alarm again, and then click the steerpillar Liangqin OK button on the steering wheel to confirm, and finally press and hold the down button and the light control lever to set the top for 5-10 seconds, so that the maintenance light can be reset to zero.