What is the method of speaker burning? What is the best way to turn on the stereo?

You can use a more frequent ** natural pot, generally at a normal volume (50%-70% volume is recommended) for about 48 hours or longer, you can also use white noise or burn-in software and other signal sources. Cook continuously for about two hours, stop for a few minutes and then continue, keeping the volume not too loud to avoid irreversible physical damage to the diaphragm of the earphones.

煲机 (bāojī) is a measure to quickly stabilize the aging of equipment. Some components such as transistors, integrated circuits, and capacitors are unstable when they are brand new, and they can gradually stabilize after a period of use.

What does it mean to burn the machine, also known as the headphones, speakers, and the machine?

"Burn-in" means that the sound quality needs to be stabilized after a period of use. If you listen to it for 1 hour a day, it will take about a few months for the sound to basically stabilize. Then this month is the "burn-in" period.

Proper burn-in will not damage the headphones, but will only accelerate the stabilization of sound quality. The word "stable" is used here, not "improved", and some headphones (speakers) don't necessarily boil better than brand new.

If you can, spend more time, use some cooker saucers, although it is slower, but it will not damage the speaker, and the effect of the boil is great, like Bai Fei's, Huiwei's, Hugo's, are good, find some cautious audio as wide as possible**, first low volume, a pot for a period of time. Then the volume slowly increases, and the time slowly increases.

Cooking a pot is a very long thing, it is best to only boil for about 3 hours a day, and use it for about 15 days.

Burning, in layman's terms, is aging in the process of use in Huaichang, which is somewhat similar to motor vehicle running-in.

Before the audio leaves the factory, the manufacturer only does the index test and the basic aging test, and the process is simple.

In the case of home use, the volume and various parameters may be used, for example, in order to pursue the effect when watching blockbusters, the volume may be turned on relatively large, at this time, the use of the power of the speaker will increase, the current bearing of the circuit will be increased, the bearing of the speaker will also be increased, and the stroke of the speaker voice coil will also increase. And these actual actions, it is impossible to test all of them before the audio leaves the factory.

Personally, I suggest how to burn the machine: If you buy back the amplifier and speaker, it is recommended to connect the audio source and use it continuously, and the volume can be increased a little every day (which means that the volume is turned on to 20% today, and the volume is turned on to 25% tomorrow, and gradually increases). The best sound source is to choose the calm type - the big dynamic type - the calm type, reincarnation**.

Of course, on the premise of not disturbing the people. After 2-3 weeks of continuous use, the whole set of sound will definitely work better than new.

1. Burn-in volume.

The volume of the burn-in machine is an important factor,According to most of the speakers on the market,Its actual power is less than its own marked power,So when the machine is burned,The volume of the speaker is adjusted to the maximum,And the volume of the sound source (**device、computer、***, etc.) is controlled at60%-75%,If the speaker ***,You can increase it as appropriate。

2. Burn-in time.

For the newly bought speaker, the burn-in machine should reach about 60 hours, if it is a speaker that has been used for a period of time, it can be burned for about 40 hours, and the ideal effect can also be received.

3. Placement of speakers.

The first is not to affect the lives of others, and it is okay to put the speaker in the utility room or basement. Then it is necessary to put it firmly and smoothly to avoid accidents caused by vibration when burning.

4. Selection of audio source.

The sound source of the burn-in should choose a multi-band **, in layman's terms, it is a serenade with heavy metal rock, as far as possible to include all frequency bands, and the frequency can also be adjusted by the computer to achieve a good burn-in effect.